Pumpset Features: 18CU 12V

12CI Pumpset - 12VDC The 12CI Pumpset, 12 VDC is intended for use with Si-Tex autopilot systems.

30CI Pumpset 12VDC Pumpsets are beneficial because they are reliable, save on installation costs, bring twice the power and cut back on half the consumption.

SP-70 Autopilot with Pump & Rotary Feedback The SI-TEX SP-70 Autopilot will add relaxation to your cruising and fishing activity. Designed for most any boat and easily installed on outboard, inboard and sterndrive vessels with either hydraulic, or quadrant steering systems. Features: Ultra-compact, waterproof Control Unit has simple keypad operation and large LCD display of heading course, rudder angle, operating mode and error messages. Control Unit can be used as dash-mounted keypad or quickly and easily removed from mounting bracket for use as a handheld portable. Additional steering stations can be easily added with optional plug-in connectors. Exceptionally easy to use. Just steer to desired course, press the PILOT key and the system takes over to steer you on your way. Automatically. Built-in NMEA0183 Loran/GPS interface for precise course-line navigation along routes. Bold, backlit displays with ten levels of brightness for clear reading in any light. Digital displays of rudder angle and operation mode in use, constantly giving you up-to-the-minute operating status. Automatic Sea State and Trim Controls and ten selectable levels of rudder sensitivity with high and low speed settings for smooth, precise steering. Rudder feedback verifies autopilot's commands. Ghost Rudder backup allows autopilot to use memory of rudder movements to calculate new movements in event of rudder feedback failure. Heading Output feature allows you to stabilize radar display. Built-in diagnostic and self tests, plus visual and audible alarms. Power Steering mode offers convenient push-button steering. Stand By mode for manual steering situations. Optional analog Rudder Angle Indicator for easy, at-a-glance reading of exact rudder position. Works with solenoid valves also

SP-120 Color System with Rudder Feedback & 18CI Pump Features: The SI-TEX SP-120C is an Autopilot designed for hydraulic steering, mechanical steering, & solenoid control Does not require a separate junction box, everything simply connects to the rear of the control head This Autopilot is ideal for small vessels under 38' The Autopilot can operate in either Virtual Rudder feedback mode in the case of Outboards or a separate Rudder Feedback unit can be added for inboard vessels SP-120C displays actual Compass heading & Selected Heading, along with Rudder Angle Displays simultaneously Compact 4.1” x 4.1” Splash proof Control head with large easy to read Color LCD LCD Display Extremely easy to select your desired headings, operate, and setup, with new user friendly software High performance 9 Axis Rate Gyro Compass provides the autopilot with excellent steering response Autopilot uses Input of GPS Speed over ground (SOG) and Course over ground (COG) to enhance performance NMEA-0183 GPS Interface accepts inputs from most Chart plotters for steering to waypoints and routes NMEA-0183 Output of Compass heading at 10kHz for interface to MFD’s with Chart/Radar Overlay Autopilot Steering Modes: Manual (Power Steer) Auto (Pilot maintains selected Magnetic course) GPS (Steers to Waypoint or Routes when Interfaced with GPS) Wind (Steers to wind when interfaced to wind sensor for Sailboat installations) Protected by 2 Year SI-TEX Warranty Specifications: Waterproof: IPX6 Control Head Dimensions: 110 mm L x 110 mm W Voltage supply VOLTAGE: 12/24 Volts DC LCD Color LCD Display Constant Compass Heading Indicator and Rudder Angle Indicator Current consumption: 0.5 amps at 12VDC in standby mode Maximum Drive Output Current 15 Amps Operating temperature: -10ºC to +55ºC Data Connections: NMEA-0183 GPS Input, NMEA-0183 10kHz Compass heading Output Course Detection <1 Degree Package Includes: SI-TEX SP-120C Color LCD Autopilot Control Head NMEA Interface Cables 9 Axis Electronic Rate Gyro Compass Control Head Sun cover Product manual Mounting Screws

keywords: Si-Tex, si-tex radar, si-tex marine radar, si-tex 900 series radars, si-tex 2000 series radar, marine radar

SI-TEX Marine Electronics has a new name: Koden America.   Koden America, a subsidiary of Koden Electronics Co. in Tokyo, will offer the Koden brand products to the commercial marine market and the SI-TEX brand to the recreational marine market. Koden America's corporate headquarters will remain in St. Petersburg, Fla.   Steve Sato was appointed president of Koden America. He has more than 15 years' marine and corporate management experience.   Ted Bodtmann was appointed executive vice president. He has more than 35 years' experience in marine and corporate management.   Koden and SI-TEX market a complete line of marine electronics, including echo sounders, charting systems, radars, GPS/WAAS and GPS/Loran receivers, AIS receivers, autopilots, radios and more.

Keywords: Si-Tex, Class B AIS, SAS-300, Si-Tex Class B AIS Transceiver, Si-Tex SAS-300 Class B AIS Transceiver, Class B AIS Transceiver  

SI-TEX has revised its offering and are now shipping the EC units with a C-MAP Max USA East Coast and Bahamas chart. This will provide much better detail than the Max Lite chart that was originally offered, but the chart does not cover all of the United States. If a customer needs a different region, they can contact SI-TEX to exchange (e.g., West, Canada, etc.).   

  The SI-TEX NavStar 10 and NavStar 12 MFDs give you everything you need - precision chartplotting, powerful dual-frequency sonar, professional-grade 4kW radar, global satellite communications and Bluetooth entertainment capabilities - all in one rugged and compact system with Hybrid Touchscreen Control.  For a limited time, these state-of-the-art units give you even more - up to $400 cash back in your pocket! *Offer valid now until April 30th, 2019     Just purchase a NavStar 10 or NavStar 12 during the promotional period and submit via mail-in rebate. What better way to start the boating season than with a new SI-TEX NavStar MFD on your helm and some extra money you can use for fuel, bait and gear! *Don't wait! This promotion runs only from January 1st, 2019 to April 30th, 2019.         Specials    Closeouts   Remanufactured    Rebates  

  The SI-TEX NavStar 10 and NavStar 12 MFDs give you everything you need - precision chartplotting, powerful dual-frequency sonar, professional-grade 4kW radar, global satellite communications and Bluetooth entertainment capabilities - all in one rugged and compact system with Hybrid Touchscreen Control.  For a limited time, these state-of-the-art units give you even more - up to $400 cash back in your pocket! *Offer valid now until April 30th, 2019     Just purchase a NavStar 10 or NavStar 12 during the promotional period and submit via mail-in rebate. What better way to start the boating season than with a new SI-TEX NavStar MFD on your helm and some extra money you can use for fuel, bait and gear! *Don't wait! This promotion runs only from January 1st, 2019 to April 30th, 2019.         Specials    Closeouts   Remanufactured    Rebates  

T-760 Compact Color Radar with 4kW 18" Dome Big radar performance and features are available for any size boat -- and budget with the SI-TEX T-760. A vertically oriented, slim case boasts advanced touch screen technology and a host of professional features. Powerful 4kW output ensures superior target acquisition and tracking in the the most challenging conditions. The T-760 Series case measures only 5.4" W X 8.9" H X 3.5" D. Yet, this system boasts a long list of professional-grade features, including powerful 4kW output, up to 24nm range, multi-speed antenna rotation, standard 50-target AIS tracking capability and standard 10-target MARPA - features often associated with larger, costlier systems. Control of all these features is achieved via the T-760's touch screen LCD display and single rotary encoder dial, for simple, intuitive operation. The series includes the T-760, equipped with an 18-inch compact radome antenna for solid performance in a wide range of conditions and range scale choices from 1/8th nm to 24nm. Both the T-760 and T-761 feature powerful 4kW transmitters, ensuring accurate detection and presentation of targets large and small. Both models also offer multi-speed antenna rotation (16/27/36/48rpm) for optimum target detection and tracking over a range of boat speeds. Among many other notable standard features of the T-760 Series are Relative Motion, True Motion, North-Up, Head-Up and Course-Up presentation modes, Auto or Manual Sea/Rain Clutter modes, 11 Trail Indication settings (including Off and Continuous), and more. With input from a SI-TEX Metadata AIS module (or other AIS receiver), the T-760 Series can track up to 50 AIS targets simultaneously for enhanced navigational safety in crowded waterways. With input of bearing, ship's speed and lat/lon data, the T-760 Series empowers navigators with professional MARPA tracking of up to 10 targets at distances up to 20nm. In the SI-TEX tradition, the T-760 Series radar is ruggedly built to withstand harsh conditions at sea on commercial as well as recreational vessels. SI-TEX's two-year limited warranty and Long Island, New York-based service department are the navigator's assurance of reliable performance and long-term satisfaction Features: 7" color LCD display 10M Cable Intuitive touch screen/rotary dial control Standard 50 target AIS tracking Standard 10 target MARPA Multi-speed (16-48 rpm) antenna rotation for optimum performance in real-world conditions Features include Relative Motion/True Motion/Head-Up/North-Up Optional color RGB video output

SP-120 Color System with Rudder Feedback without Drive Unit Features: The SI-TEX SP-120C is an Autopilot designed for hydraulic steering, mechanical steering, & solenoid control Does not require a separate junction box, everything simply connects to the rear of the control head This Autopilot is ideal for small vessels under 38' The Autopilot can operate in either Virtual Rudder feedback mode in the case of Outboards or a separate Rudder Feedback unit can be added for inboard vessels SP-120C displays actual Compass heading & Selected Heading, along with Rudder Angle Displays simultaneously Compact 4.1” x 4.1” Splash proof Control head with large easy to read Color LCD LCD Display Extremely easy to select your desired headings, operate, and setup, with new user friendly software High performance 9 Axis Rate Gyro Compass provides the autopilot with excellent steering response Autopilot uses Input of GPS Speed over ground (SOG) and Course over ground (COG) to enhance performance NMEA-0183 GPS Interface accepts inputs from most Chart plotters for steering to waypoints and routes NMEA-0183 Output of Compass heading at 10kHz for interface to MFD’s with Chart/Radar Overlay Autopilot Steering Modes: Manual (Power Steer) Auto (Pilot maintains selected Magnetic course) GPS (Steers to Waypoint or Routes when Interfaced with GPS) Wind (Steers to wind when interfaced to wind sensor for Sailboat installations) Protected by 2 Year SI-TEX Warranty Specifications: Waterproof: IPX6 Control Head Dimensions: 110 mm L x 110 mm W Voltage supply VOLTAGE: 12/24 Volts DC LCD Color LCD Display Constant Compass Heading Indicator and Rudder Angle Indicator Current consumption: 0.5 amps at 12VDC in standby mode Maximum Drive Output Current 15 Amps Operating temperature: -10ºC to +55ºC Data Connections: NMEA-0183 GPS Input, NMEA-0183 10kHz Compass heading Output Course Detection <1 Degree Package Includes: SI-TEX SP-120C Color LCD Autopilot Control Head NMEA Interface Cables 9 Axis Electronic Rate Gyro Compass Control Head Sun cover Product manual Mounting Screws

SP-120 Color System with Rudder Feedback & Type "S" Mechanical Dash Drive Features: The SI-TEX SP-120C is an Autopilot designed for hydraulic steering, mechanical steering, & solenoid control Does not require a separate junction box, everything simply connects to the rear of the control head This Autopilot is ideal for small vessels under 38' The Autopilot can operate in either Virtual Rudder feedback mode in the case of Outboards or a separate Rudder Feedback unit can be added for inboard vessels SP-120C displays actual Compass heading & Selected Heading, along with Rudder Angle Displays simultaneously Compact 4.1” x 4.1” Splash proof Control head with large easy to read Color LCD LCD Display Extremely easy to select your desired headings, operate, and setup, with new user friendly software High performance 9 Axis Rate Gyro Compass provides the autopilot with excellent steering response Autopilot uses Input of GPS Speed over ground (SOG) and Course over ground (COG) to enhance performance NMEA-0183 GPS Interface accepts inputs from most Chart plotters for steering to waypoints and routes NMEA-0183 Output of Compass heading at 10kHz for interface to MFD’s with Chart/Radar Overlay Autopilot Steering Modes: Manual (Power Steer) Auto (Pilot maintains selected Magnetic course) GPS (Steers to Waypoint or Routes when Interfaced with GPS) Wind (Steers to wind when interfaced to wind sensor for Sailboat installations) Protected by 2 Year SI-TEX Warranty Specifications: Waterproof: IPX6 Control Head Dimensions: 110 mm L x 110 mm W Voltage supply VOLTAGE: 12/24 Volts DC LCD Color LCD Display Constant Compass Heading Indicator and Rudder Angle Indicator Current consumption: 0.5 amps at 12VDC in standby mode Maximum Drive Output Current 15 Amps Operating temperature: -10ºC to +55ºC Data Connections: NMEA-0183 GPS Input, NMEA-0183 10kHz Compass heading Output Course Detection <1 Degree Package Includes: SI-TEX SP-120C Color LCD Autopilot Control Head NMEA Interface Cables 9 Axis Electronic Rate Gyro Compass Control Head Sun cover Product manual Mounting Screws

SP-120 Color System with Rudder Feedback & Type "T" Mechanical Dash Drive Features: The SI-TEX SP-120C is an Autopilot designed for hydraulic steering, mechanical steering, & solenoid control Does not require a separate junction box, everything simply connects to the rear of the control head This Autopilot is ideal for small vessels under 38' The Autopilot can operate in either Virtual Rudder feedback mode in the case of Outboards or a separate Rudder Feedback unit can be added for inboard vessels SP-120C displays actual Compass heading & Selected Heading, along with Rudder Angle Displays simultaneously Compact 4.1” x 4.1” Splash proof Control head with large easy to read Color LCD LCD Display Extremely easy to select your desired headings, operate, and setup, with new user friendly software High performance 9 Axis Rate Gyro Compass provides the autopilot with excellent steering response Autopilot uses Input of GPS Speed over ground (SOG) and Course over ground (COG) to enhance performance NMEA-0183 GPS Interface accepts inputs from most Chart plotters for steering to waypoints and routes NMEA-0183 Output of Compass heading at 10kHz for interface to MFD’s with Chart/Radar Overlay Autopilot Steering Modes: Manual (Power Steer) Auto (Pilot maintains selected Magnetic course) GPS (Steers to Waypoint or Routes when Interfaced with GPS) Wind (Steers to wind when interfaced to wind sensor for Sailboat installations) Protected by 2 Year SI-TEX Warranty Specifications: Waterproof: IPX6 Control Head Dimensions: 110 mm L x 110 mm W Voltage supply VOLTAGE: 12/24 Volts DC LCD Color LCD Display Constant Compass Heading Indicator and Rudder Angle Indicator Current consumption: 0.5 amps at 12VDC in standby mode Maximum Drive Output Current 15 Amps Operating temperature: -10ºC to +55ºC Data Connections: NMEA-0183 GPS Input, NMEA-0183 10kHz Compass heading Output Course Detection <1 Degree Package Includes: SI-TEX SP-120C Color LCD Autopilot Control Head NMEA Interface Cables 9 Axis Electronic Rate Gyro Compass Control Head Sun cover Product manual Mounting Screws