|
400 ft. Downrigger Cable
One strand, wrapped and reinforced with 6 surrounding strands to provide the ultimate in strength and consistency. Includes terminal kit.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
36.23 |
|
|
200 ft. Downrigger Cable
One strand, wrapped and reinforced with 6 surrounding strands to provide the ultimate in strength and consistency. Includes terminal kit.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
22.19 |
|
|
300 ft. Downrigger Cable
One strand, wrapped and reinforced with 6 surrounding strands to provide the ultimate in strength and consistency. Includes terminal kit.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
30.34 |
|
|
High Performance
2401K 300 ft. of 180 lb. test
Premium Stainless Steel Downrigger Cable
Comes with:
1 Coastlock snap with swivel (No.1153), 3 sleeves, 1 soft stop bumper and 1 stainless steel thimble.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
34.03 |
|
|
High Performance
2402K 400 ft. of 180 lb. test
Premium Stainless Steel Downrigger Cable
Comes with:
1 Coastlock snap with swivel (No.1153), 3 sleeves, 1 soft stop bumper and 1 stainless steel thimble.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
41.94 |
|
|
Replacement Cable for Trolling Motor Pull Rope
Never worry about that trolling motor pull rope breaking again. This stainless steel vinyl coated braided cable is used to replace the manufacturer's pull rope on your trolling motor. This replacement cable will not rust, break or rot. It comes with complete, easy to follow installation instructions. Don't wait for your rope to break, replace it with this durable steel cable now.
|
16.30 |
|
|
SkegGuard® 27411 Stainless Steel Replacement Skeg
Skeg Model Guide
SS FITS MERCURY 175 200 225 V6 4 STROKE PRO XS 4.8" GEARCASE 2019 - PRESENT
Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & Replacement
Megaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.
Protect Your Skeg with the Best Protector
The Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.
This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.
Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.
If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.
Megaware SkegGuard® is available in models to fit virtually any skeg.
Warranty
Megaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.
Features:
Mirror Polished Marine Grade 316 Stainless Steel
Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running
Drain Hole Prevents Corrosion and Freezing
Won’t Compromise Performance
Do-It-Yourself Install in Less than 10 Minutes
Installs with as Little as 2-3 Inches of Skeg Remaining
|
73.03 |
|
|
Megaware SkegGuard® 27011 Stainless Steel replacement skeg
Model Guide
Mercruiser - pre alpha 1 drives 1973-1984
Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & Replacement
Megaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.
Protect Your Skeg with the Best Protector
The Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.
This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.
Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.
If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.
Megaware SkegGuard® is available in models to fit virtually any skeg.
Warranty
Megaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.
Features:
Megaware SkegGuard® 27011 Stainless Steel replacement skeg Mirror Polished Marine Grade 316 Stainless Steel
Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running
Drain Hole Prevents Corrosion and Freezing
Won’t Compromise Performance
Do-It-Yourself Install in Less than 10 Minutes
Installs with as Little as 2-3 Inches of Skeg Remaining
|
73.03 |
|
|
Megaware SkegGuard® 27021 Stainless Steel Replacement Skeg
Model Guide
Mercruiser - Alpha I 1985-1990
Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & Replacement
Megaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.
Protect Your Skeg with the Best Protector
The Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.
This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.
Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.
If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.
Megaware SkegGuard® is available in models to fit virtually any skeg.
Warranty
Megaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.
Features:
Mirror Polished Marine Grade 316 Stainless Steel
Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running
Drain Hole Prevents Corrosion and Freezing
Won’t Compromise Performance
Do-It-Yourself Install in Less than 10 Minutes
Installs with as Little as 2-3 Inches of Skeg Remaining
|
73.03 |
|
|
SkegGuard® 27031 Stainless Steel Replacement skeg
Model Guide
Mercruiser - Alpha I Generation II 1991-Present
Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & Replacement
Megaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.
Protect Your Skeg with the Best Protector
The Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.
This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.
Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.
If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.
Megaware SkegGuard® is available in models to fit virtually any skeg.
Warranty
Megaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.
Features:
Mirror Polished Marine Grade 316 Stainless Steel
Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running
Drain Hole Prevents Corrosion and Freezing
Won’t Compromise Performance
Do-It-Yourself Install in Less than 10 Minutes
Installs with as Little as 2-3 Inches of Skeg Remaining
|
73.03 |
|
|
SkegGuard® 27041 Stainless Steel Replacement Skeg
Model Guide
Yamaha - 200-225-250V Max SHO 2013-Present 200V Max HPDI 2004-2010
Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & Replacement
Megaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.
Protect Your Skeg with the Best Protector
The Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.
This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.
Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.
If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.
Megaware SkegGuard® is available in models to fit virtually any skeg.
Warranty
Megaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.
Features:
Mirror Polished Marine Grade 316 Stainless Steel
Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running
Drain Hole Prevents Corrosion and Freezing
Won’t Compromise Performance
Do-It-Yourself Install in Less than 10 Minutes
Installs with as Little as 2-3 Inches of Skeg Remaining
|
73.03 |
|
|
SkegGuard® 27051 Stainless Steel Replacement Skeg
Model Guide
Mercuiser - Bravo I & III 1990-Present
Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & Replacement
Megaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.
Protect Your Skeg with the Best Protector
The Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.
This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.
Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.
If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.
Megaware SkegGuard® is available in models to fit virtually any skeg.
Warranty
Megaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.
Features:
Mirror Polished Marine Grade 316 Stainless Steel
Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running
Drain Hole Prevents Corrosion and Freezing
Won’t Compromise Performance
Do-It-Yourself Install in Less than 10 Minutes
Installs with as Little as 2-3 Inches of Skeg Remaining
|
73.03 |
|
|
SkegGuard® 27061 Stainless Steel Replacement
Skeg Model Guide
Mariner - 135 2 & 4 Stroke 1978-2005 135 2006-2011 150-175-200-225-250-275-300 Optimax 2005- Present 150-175 1978-2004 200 1978-1995 200 2 & 4 Stroke 1996-2005 225 2 Stroke 1978-2004
Mercury - 90 2014-2016 115 4 Stroke 2014-2016 115-2016 ProXS 140 2003-2005 135-150-175 2 Stroke 1987-Present 200 1995-Present 225 2 Stroke 1978-1995 250 1978-1995
Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & Replacement
Megaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.
Protect Your Skeg with the Best Protector
The Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.
This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.
Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.
If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.
Megaware SkegGuard® is available in models to fit virtually any skeg.
Warranty
Megaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.
Features:
Mirror Polished Marine Grade 316 Stainless Steel
Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running
Drain Hole Prevents Corrosion and Freezing
Won’t Compromise Performance
Do-It-Yourself Install in Less than 10 Minutes
Installs with as Little as 2-3 Inches of Skeg Remaining
|
73.03 |
|
|
SkegGuard® 27071 Stainless Steel Replacement Skeg
Model Guide
Force - 70 -90 2 Stoke 1998- 2002 (By Mercury)
Honda - 75-90-115 4 Stroke 1995-2007 60-75 4 Stroke 2010-Present
Marine - 50-60 Bigfoot 2003-2014 70-90-100-115-125 Incl. Optimax 2 & 4 Stroke 1983-Present
Mercury - 40-50-60 Bigfoot 2001-2013 40-50 Command Thrust 2014-Present 50 4 Stroke 1999-2013 60 Command Thrust 2014-Present 75 2 & 4 Stroke 2003-2013 90 2 & 4 Stroke 2001-2013 115 2& 4 Stroke 2002-2013 115 2 Stroke 2014-2016 125 2003-2005
Yamaha - 60-70-80-90-100 2 & 4 Stroke 1998-2001
Nissan/Tohatsu - 70-90-115- 120 -140 2 Stroke 1993- Present
Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & Replacement
Megaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.
Protect Your Skeg with the Best Protector
The Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.
This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.
Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.
If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.
Megaware SkegGuard® is available in models to fit virtually any skeg.
Warranty
Megaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.
Features:
Mirror Polished Marine Grade 316 Stainless Steel
Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running
Drain Hole Prevents Corrosion and Freezing
Won’t Compromise Performance
Do-It-Yourself Install in Less than 10 Minutes
Installs with as Little as 2-3 Inches of Skeg Remaining
|
73.03 |
|
|
SkegGuard® 27081 Stainless Steel Replacement Skeg
Model Guide
Evinrude - 90-115-130 25” or 30” Shaft 2 Stroke 2006-Present 105-150 1994-2001
Johnson - 90-115-130 25” or 30” Shaft 2 Stroke 2006-Present 105-150 1994-2001 125 1994-1998 135 20" Shaft 2000-2006 150 20" Shaft 2002-2006 175-200 1994-2001 225-250-300 1994-2001 175-200-20” Shaft 2 Stroke 2006-Present
Suzuki - 300 4 Stroke 2009-Present
OMC Cobra - V6 & V8 1986-1994
Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & Replacement
Megaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.
Protect Your Skeg with the Best Protector
The Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.
This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.
Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.
If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.
Megaware SkegGuard® is available in models to fit virtually any skeg.
Warranty
Megaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.
Features:
Mirror Polished Marine Grade 316 Stainless Steel
Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running
Drain Hole Prevents Corrosion and Freezing
Won’t Compromise Performance
Do-It-Yourself Install in Less than 10 Minutes
Installs with as Little as 2-3 Inches of Skeg Remaining
|
73.03 |
|