PT3010 Base Wedge f/PowerTower® Radar Mounts - 4° Enhance the performance of your radome with our tough, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway. Compatible with: Composite and Aluminum PowerTower® Features: Enhance the performance of your radome with the Universal Scanstrut 4° radar base wedge 4° Base Wedge for mounting under PowerTower® A tough, marine-grade, UV stable wedge  Compatible with radomes from most radar manufacturers Technical Specifications: Material - Marine grade Polymer Dimensions (L x W ) - 8" x 8" Angle - 4° In the Box: Wedge Base seal Instruction manual *Sold as an Individual 

WD-RAD-01 Top Plate f/PowerTower® Radar Mounts - 4° Enhance the performance of your radome with the rugged, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway. Mounts between PowerTower® mount and base of radar. Compatible with: Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - AS 21RD4KW, HB 2124 CHIRP radars Lowrance - HALO20, HALO20+, HALO24, LRA-1800 / RB714A / DX42, LRA-2400 HD radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12, GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars Sitex - MDS-12 radar Features: Enhance the performance of your radome with the Universal Scanstrut 4° radar base wedge 4° Base Wedge for mounting under PowerTower® A rugged, marine-grade, UV stable wedge  Compatible with radomes from most radar manufacturers Technical Specifications: Material - Marine Grade Polymer Dimensions (L x W ) - 11.10" x 9.09" Angle - 4° In the Box: Wedge Base seal Instruction manual *Sold as an Individual

APT-150-01 - Aluminum PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual 

APT-250-01 - Aluminum PowerTower® Radar Mount - 10" Aft Leaning The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 9.84" (250mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual 

APT-150-02 - Aluminum PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D/DRSD4D-NXT, DRS4W, NavNet (18" and 24") radars Humminbird - AS 21 RD4KW radar Intellian - i1 radars Interphase - Mini RE-1, RE-8 radars JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000, JMA 2343 / 5104 (Radome: NKE-2042) radars Koden - 2kW 12" radar KVH - TracVision M1 and TV1 radars Lowrance - 3G/4G, LRA-1800, RB714A, DX42, LRA-2400 HD radars Majestic - SATMAR32 radar Navman - 8000 Series (8084 and 8120) 18" radars Nobletec - 2kW - 20" radars Northstar - M Series 18" and 24"  8000i radars Raymarine - 33STV radars Seiwa - SWR-1, 8, 9 radars Simrad - 3G/4G, GB40, NX40/45, NSE8/12, RB712A, DX42S, DX64S radars Sitex - MDS-1, 8, 12, NKE-1066 radars Techmarine - T-72.01, 72.02, 72.04 Radars Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual 

APT-250-02 - Aluminum PowerTower® Radar Mount - 10" Aft Leaning The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D/DRSD4D-NXT, DRS4W, NavNet (18" and 24") radars Humminbird - AS 21 RD4KW radar Intellian - i1 radars Interphase - Mini RE-1, RE-8 radars JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000, JMA 2343 / 5104 (Radome: NKE-2042) radars Koden - 2kW 12" radar KVH - TracVision M1 and TV1 radars Lowrance - 3G/4G, LRA-1800, RB714A, DX42, LRA-2400 HD radars Majestic - SATMAR32 radar Navman - 8000 Series (8084 and 8120) 18" radars Nobletec - 2kW - 20" radars Northstar - M Series 18" and 24"  8000i radars Raymarine - 33STV radars Seiwa - SWR-1, 8, 9 radars Simrad - 3G/4G, GB40, NX40/45, NSE8/12, RB712A, DX42S, DX64S radars Sitex - MDS-1, 8, 12, NKE-1066 radars Techmarine - T-72.01, 72.02, 72.04 Radars Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium A range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 9.84" (250mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual

SPT2010 Base Wedge for Stainless Steel PowerTower® - 4° Enhance the performance of your radome with our tough, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway.  Compatible with: Stainless Steel Aft leaning PowerTower® Features: Enhance the performance of your radome with the Universal Scanstrut 4° radar base wedge 4° Base Wedge for mounting under PowerTower® A tough, marine-grade, UV stable wedge  Compatible with radomes from most radar manufacturers Technical Specifications: Material - Marine grade Polymer Dimensions (L x W) - 8.07" x 8.07"  Degree of angle - 4° In the Box: Wedge Wedge base Instruction manual *Sold as an Individual

PT2004 - PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Composite PowerTower is engineered for outstanding strength with an unparalleled surface finish.  Manufactured using the best composite materials, PowerTower® is molded as a single structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO 20, 20+, 24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHRIP radar ICOM - MR-1010RII radar Intellian - FB150 in i3, FBR250 in i3, FBR250R in i3, i3 radars KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - 37STV, QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Sea-Tel - Coastal 14 radar Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Hollow stem allowing internal routing of all cables Watertight Installation - IP65 gland to seal cable entry into stem and a watertight base seal included so no need for messy sealant.  Ease of Install - the pre-drilled mounting holes, the antenna fastens to PowerTower top plate using its own mounting bolts.  Technical Specifications: Radar Type - Dome Material - Composite Height - 6.2"" (158mm) Mounting Type - Aft leaning - 30° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual 

PT2005 - PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Composite PowerTower is engineered for outstanding strength with an unparalleled surface finish.  Manufactured using the best composite materials, PowerTower® is molded as a single structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D/DRSD4D-NXT, DRS4W, NavNet (18" and 24") radars Humminbird - AS 21 RD4KW radar Intellian - i1 radars Interphase - Mini RE-1, RE-8 radars JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000 radars Koden - 2kW 12" radar KVH - TracVision M1 and TV1 radars Lowrance - LRA-1800, RB714A, DX42, LRA-2400 HD radars Majestic - SATMAR32 radar Navman - 8000 Series (8084 and 8120) 18" radars Nobletec - 2kW - 20" radars Northstar - M Series 18" and 24"  8000i radars Raymarine - 33STV radars Seiwa - SWR-1, 8, 9 radars Simrad - GB40, NX40/45, NSE8/12, RB712A, DX42S, DX64S radars Sitex - MDS-1, 8, 12, NKE-1066 radars Techmarine - T-72.01, 72.02, 72.04 Radars Features: Hollow stem allowing internal routing of all cables Watertight Installation - IP65 gland to seal cable entry into stem and a watertight base seal included so no need for messy sealant.  Ease of Install - the pre-drilled mounting holes, the antenna fastens to PowerTower top plate using its own mounting bolts.  Technical Specifications: Radar Type - Dome Material - Composite Height - 6.2"" (158mm) Mounting Type - Aft leaning - 30° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual 

APT-F-150-02 Aluminum PowerTower® Radar Mount - 6" Forward Leaning The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D, DRS4D-NXT, DRS4W, 18" and 24" NavNet radars Humminbird - AS 21RD4KW radar Intellian - i1 radar Interphase - Mini RE-1, RE-8 radars JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000, JMA 2343 / 5104 (Radome: NKE-2042) radars Koden - 2kW 12" radar KVH - TracVision M1 and TV1 radars Lowrance - 3G/4G, LRA-1800 / RB714A / DX42, LRA-2400 HD radars Majestic - SATMAR32 radar Navman - 18" and 24" Series 8000 radars Nobletec - 2kW (20") radars Northstar - 18" and 24" M Series/8000i Raymarine - 33STV radar Seiwa - SWR-1, 8 and 9 radars Simrad - 3G/4G, GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars Sitex - MDS-1, 8, 12, NKE-1066 radars Techmarine - T-72.01, 72.02, 72.04 radars Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium A range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 5.91" (150mm) Mounting Type - Forward leaning - 33° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual

APT-F-150-01 Aluminum PowerTower® Radar Mount - 6" Forward Leaning The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO 20, 20+, 24 radars Garmin - Fantom 18, 24, GMR18HD, GMR18xHD, GMR24HD, GMR24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - Quantum (Q24C), Quantum 2 (Q24D) radars Simrad - 3G/4G, DX45, DX60, DX54-S, GB40, NX40, NSE 8/12 radars Sitex - RADARpc 3.5/4.5 radars Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium A range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 5.91" (150mm) Mounting Type - Forward leaning - 33° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual

APT-F-250-01 Aluminum PowerTower® Radar Mount - 10" Forward Leaning The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO 20, 20+, 24 radars Garmin - Fantom 18, 24, GMR18HD, GMR18xHD, GMR24HD, GMR24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - Quantum (Q24C), Quantum 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60, DX54-S, GB40, NX40, NSE 8/12 radars Sitex - RADARpc 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium A range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 9.84" (250mm) Mounting Type - Forward leaning - 33° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual

APT-F-250-02 Aluminum PowerTower® Radar Mount - 10" Forward Leaning The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D, DRS4D-NXT, DRS4W, 18" and 24" NavNet radars Humminbird - AS 21RD4KW radar Intellian - i1 radar Interphase - Mini RE-1, RE-8 radars JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000, JMA 2343 / 5104 (Radome: NKE-2042) radars Koden - 2kW 12" radar Lowrance - 3G/4G, LRA-1800 / RB714A / DX42, LRA-2400 HD radars Navman - 18" and 24" Series 8000 radars Nobletec - 2kW (20") radars Northstar - 18" and 24" M Series/8000i Seiwa - SWR-1, 8 and 9 radars Simrad - 3G/4G, GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars Sitex - MDS-1, 8, 12, NKE-1066 radars Techmarine - T-72.01, 72.02, 72.04 radars Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium A range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 9.84" (250mm) Mounting Type - Forward leaning - 33° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual

SPT1001 - Stainless Steel PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Stainless Steel PowerTower® is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Stainless Steel, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18 and 24, GMR18HD, 18xHD, 18HD+, GMR24HD and 24xHD, GMR40 radars Humminbird - HB2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Nobletec - 4KW radars Raymarine - QUANTUM (Q24C) and QUANTUM 2 (Q24D0, RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, 60, 64-S, GB40/NX40/45/NSE1/12 radars Sitex - RADARpc-4D Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Stainless Steel Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Stainless Steel Height - 6" (152mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts) Installation manual *Sold as an Individual

APT-150-01 - Aluminum PowerTower® Radar Mount - 6" Aft Leaning - Black The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual