|
240SW 5 x 8 Hailer/PA Horn - White
Features:
5 x 8" Rectangular 4 OHM PA/Hailing horn
Compatible w/GX2000/GX2200/GX6000S and VLH-3000A
4 ohm
40 watt horn
|
46.96 |
|
|
4.5" Round Hailer/PA Horn - White
4.5" Round PA/Hailing horn
Compatible w/GX2200S/GX3000S/GX5000S/GX5500S/VLH-3000
30 Watt horn
4 Ohm
|
40.00 |
|
|
5" x 8" Weatherproof PA Speaker
Frequency Range: 200Hz15kHz
Max Power: 30 W
Impedance: 8 Ohms
SPL: 120 ± 5dB
Size: 7-3/4” Width x 4-5/8” Height x 9-1/2” Depth
Weatherproof ABS construction
|
27.43 |
|
|
6.5" x 11" Weatherproof PA Speaker
Frequency Response: 200Hz 15kHz
Max Power: 40W
Sensitivity: 120dB 1W/1M
Impedance: 8 Ohms
Size: 6” Width x 10-7/8” Height x 8-3/8” Depth
Weatherproof ABS construction
|
36.00 |
|
|
Hustler® - Right Hand - Aluminum Propeller - H1-1208 - 3-Blade - 12.5" x 8 Pitch
Turning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.
The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.
Squeeze Cast for Added Strength
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.
Long Lasting Ultracoat™ Powder Coated Finish
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.
Large Free Flowing Exhaust Ports
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.
Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.
WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
71.09 |
|
|
Hustler® - Right Hand - Aluminum Propeller - H2-1208 - 3-Blade - 12.5" x 8 Pitch
Turning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.
The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.
Squeeze Cast for Added Strength
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.
Long Lasting Ultracoat™ Powder Coated Finish
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.
Large Free Flowing Exhaust Ports
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.
Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.
WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
78.37 |
|
|
Storm Gard™ 5.5" x 20" Inflatable Vinyl Fender - White
Taylor Made Products introduces the latest in fender color technology. Introducing Storm Gard™ colors to our inflatable vinyl fenders. These fenders are in a class of their own, and feature all the same great qualities and Life Time Guarantee as our standard Hull Gard®, Super Gard™ and Big B™ fenders.
Integrated color agents provide added luster in sunlight.
Patented color enhancement process provides deeper richer colors.
Color matches depth of gelcoats on most boats.
Rubber football needle valve for easy inflation and long life.
Valve seats are integrally molded into the fender, not glued in like the competition.
Reinforced molded-in eyelets
Boat Size: 15' to 20'
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.
Lifetime Warranty against splitting or bursting
|
20.83 |
|
|
Storm Gard™ 6.5" x 22" Inflatable Vinyl Fender - White
Taylor Made Products introduces the latest in fender color technology. Introducing Storm Gard™ colors to our inflatable vinyl fenders. These fenders are in a class of their own, and feature all the same great qualities and Life Time Guarantee as our standard Hull Gard®, Super Gard™ and Big B™ fenders.
Integrated color agents provide added luster in sunlight.
Patented color enhancement process provides deeper richer colors.
Color matches depth of gelcoats on most boats.
Rubber football needle valve for easy inflation and long life.
Valve seats are integrally molded into the fender, not glued in like the competition.
Reinforced molded-in eyelets
Boat Size: 20' to 25'
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.
Lifetime Warranty against splitting or bursting
|
32.29 |
|
|
Storm Gard™ 8.5" x 27" Inflatable Vinyl Fender - White
Taylor Made Products introduces the latest in fender color technology. Introducing Storm Gard™ colors to our inflatable vinyl fenders. These fenders are in a class of their own, and feature all the same great qualities and Life Time Guarantee as our standard Hull Gard®, Super Gard™ and Big B™ fenders.
Integrated color agents provide added luster in sunlight.
Patented color enhancement process provides deeper richer colors.
Color matches depth of gelcoats on most boats.
Rubber football needle valve for easy inflation and long life.
Valve seats are integrally molded into the fender, not glued in like the competition.
Reinforced molded-in eyelets
Boat Size: 25' to 35'
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.
Lifetime Warranty against splitting or bursting
|
62.59 |
|
|
Super Gard™ 6.5" x 22" Inflatable Vinyl Fender - White
Taylor Made Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your dollar. Super Gard™ fenders are in a class of their own. Made from the highest quality marine grade vinyl, Super Gards™ feature a HIGH GLOSS finish and double molded black ends for extra strength where you need it the most. Seamless one-piece construction with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life.
Boat Size: 20' to 25'
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.
Lifetime Warranty against splitting or bursting
|
44.45 |
|
|
Super Gard™ 8.5" x 26" Inflatable Vinyl Fender - White
Taylor Made Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your dollar. Super Gard™ fenders are in a class of their own. Made from the highest quality marine grade vinyl, Super Gards™ feature a HIGH GLOSS finish and double molded black ends for extra strength where you need it the most. Seamless one-piece construction with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life.
Boat Size: 25' to 35'
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.
Lifetime Warranty against splitting or bursting
|
76.39 |
|
|
Groco S-73-B Tie Rod, 316Ss .250 X 8.938
|
14.92 |
|
|
Groco Svs-1257 Sight Glass 4.5 X 8.625
|
420.81 |
|
|
Groco As-77-A 4.5 X 8 #316 Ss Enclosure
|
283.08 |
|
|
2304 MiniBus 100 Ampere Common BusBar 5 x 8-32 Screw Terminal
Features:
Great for limited space applications in electronics cabinets and under dashboards
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
11.58 |
|