Shakespeare Style 5241-R VHF Marine 36" LENGTH 3dB LOW PROFILE END-FED 1/2-WAVE WITH HEAVY-DUTY WHIP The perfect choice for bass boats, center console fishing boats, or any vessel where compact size is most important. Comes with a heavy-duty stainless steel whip for extra stability at high speeds. Chrome plated brass canister minimizes de-tuning. Sealed, tin-plated copper wire coil Requires mount with center hole for passage of the supplied 15' RG-58 cable. PL-259 connector included Stainless steel whip (36") Suggested mount: Shakespeare Styles 4187, 4188-S, or 4190 Ratchet Mounts Shakespeare Limited Warranty: 2 years Technical Specifications: Frequency: VHF Marine Band Bandwidth: 7 MHz SWR: 1.5:1 at 156.8 MHz Radiation pattern: Omni-directional Gain: 3 dB Max Input (Watts): 50 watts DC Ground: YES Height (feet): 3 Polarization: Vertical

Style 4018 VHF 9dB Phased 1/2-wave elements in a collinear array with a coaxial choking sleeve to suppress cable radiation The top choice for charter boat captains and experienced sport fishing enthusiasts. This long-distance VHF antenna is rigid enough to stay erect in rough seas, yet exceptionally lightweight. Brass and copper elements Chrome-plated brass ferrules Includes 20' RG-58 cable and a PL-259 connector Suggested mount: Style 409-R or 410-R Mounting Kit for deck or side mounting Two sections: base 162", tip 66" Technical Specifications: Frequency: VHF Marine band Bandwidth: (within 2.0:1 SWR) 3 MHz SWR: 1.5:1 at 156.8 MHz Impedance: (ohms): 50 Gain: 9 dB Max Input (Watts): 25 DC Ground: NO Termination: 20' RG-58 Height (feet): 19 Polarization: Vertical Radiation pattern: Omni-directional

6018-R Phase III VHF Antenna - 17′ 6″ (5.3M) VHF Marine Band 9dB Gain  Good communication over the VHF Marine Band depends on antenna height, quality and dB Gain. This high performing Phase III™ marine antenna is a powerhouse providing all of those necessities in our rugged, high-strength, foam-filled fiberglass radome for stability in high seas, high winds and high speeds. Features: Silver-plated outer conductor, copper inner conductor • Stainless steel mounting sleeve • Type SO-239 connector inside mounting sleeve for easy mounting and dismounting for stowage • Suggested mount: Shakespeare® Style 409-R or 410-R Mounting Kit • Two sections: Base 110″, Tip 110″ Specifications: Design: Collinear-phased 1/2-wave elements with choking sleeve  Height: 18' (5.48m) Weight: 20lbs (9kg) Gain: 8dB Connector Type: SO-239 Suggested Mounting: 409-R or 410-R Impedance: 50 ohms Max Input Power: 150W DC Grounding: No Shakespeare Limited Warranty: 8 years

476 18.5' Classic VHF Antenna *THIS PRODUCT MUST SHIP TRUCK FREIGHT AND DOES NOT QUALIFY FOR ANY SHIPPING PROMOTIONS The Shakespeare 476 antenna is a one-section, phased 1/2-wave collinear array, commercial VHF 10dB marine antenna. Designed to get the message through when all others fail, this unique antenna puts the signal on the horizon, providing gain in all directions. For heavy-duty seagoing applications, such as workboats, tugs, tital well service boats, etc. The reduced-length version (now 18'5") has been shortened to maintain performance while making it easier to ship both internationally and domestically. Built for value without compromising performance or durability, the Classic Series covers the widest variety of vessels in the Shakespeare® family. These antennas keep you connected and meet essential communication needs while offshore. Features: Brass and copper elements provide a standard range and reception Chrome-plated brass or nylon ferrule with standard 1: -14 thread provides for a basic install Smooth, durable, high-gloss white/fiberglass finish prevents yellowing VSWR of <1.5:1 at 156.8 MHz Utilizes 15’ RG 58 cable, PL-259 connector type, unless otherwise noted below* 2-year warranty Specifications: Frequency: VHF Marine band Bandwidth: (within 2.0:1 SWR): 10 MHz SWR: 1.5:1 at 156.8 MHz Impedance (ohms): 50 ohms Gain: 10 dB Max Input (Watts): 350W DC Ground: Yes - Read Shorted Termination: SO-239 connector Height (feet): 18.5' Polarization: Vertical Radiation Pattern: Omni-directional Suggested Mount: 483 Mast Bracket

5101 8' Classic VHF Antenna with 15' Cable - Reduced Length Version END-FED WITH MATCHING STUB A standard of excellence in an economical antenna! Shakespeare brings you the best of the high-end features in an 8' antenna with a brass element and a smooth, high gloss, polyurethane finish that wont turn yellow in the sun. This antenna delivers not only performance, but superb value. Features: Brass and copper elements Chrome-plated brass ferrule with standard 1"-14 thread Includes 15' RG-58 cable and a PL-259 connector Suggested mount: Shakespeare Style 4187 Ratchet Mount, or use a Shakespeare Style 410-R Mounting Kit plus a Style 4008 Extension Mast to form a 16' antenna system One section Shakespeare Limited Warranty: 2 years Technical Specifications: Frequency:    VHF Marine Band Bandwidth:    (within 2.0 1 SWR): 5 MHz SWR:    1.5:1 at 156.8 MHz Impedance:    (Ohms): 50 Gain:    6 dB Max. Input (Watts):    50 DC Ground:    YES - however, the antenna will read "open circuit" when tested with ohmeter. Termination:    15' RG-58 cable Height (feet):    8' Polarization:    Vertical Radiation pattern:    Omni - directional

THIS PRODUCT MUST SHIP TRUCK FREIGHT AND DOES NOT QUALIFY FOR ANY SHIPPING PROMOTIONS Shakespeare Style 4018-M VHF Marine 19' LENGTH, 9dB PHASED 1/2-WAVE ELEMENTS IN A COLLINEAR ARRAY WITH A COAXIAL CHOKING SLEEVE TO SUPPRESS CABLE RADIATION Same as Style 4018 with a special sleeve for mast mounting. Used primarily for land-based stations and on commercial vessels. The top choice for charter boat captains and experienced sport fishing enthusiasts. This long-distance VHF antenna is rigid enough to stay erect in rough seas, yet exceptionally lightweight. Brass and copper elements Chrome-plated brass mid section ferrules and aluminum sleeve bottom ferrule SO-239 connector at base Suggested mount: Mast mount using supplied 1-1/3" U-bolts. The 4018-M can be strapped to a larger mast if steel banding (not supplied) is used. Two sections: Base 162"; Tip 66&quot: Shakespeare Limited Warranty: 2 years Technical Specifications: Frequency: VHF Marine band Bandwidth: (within 2.0:1 VSWR) 3 MHz SWR: 1.5:1 at 156.8 MHz Impedance: (ohms): 50 Gain: 9 dB Max Input (Watts): 25 DC Ground: NO Termination: SO-239 Height (feet): 19 Polarization: Vertical Radiation pattern: Omni-directional

Shakespeare Galaxy 5230 14' VHF 8dB Gain 5/8 wave over 1/2 wave dipole The ultra-performer, Shakespeares Style 5230 is the most effective 8dB antenna system available anywhere, thanks to its increased signal capture area. Brass and copper elements for maximum range and efficiency Stainless steel ferrule with standard 1"-14 thread Includes 20 feet of RG-8/X cable and a PL-259 connector Suggested mount: Shakespeare Style 409-R or 410-R Mounting Kit Two sections: Base 94", Tip 74" -  Shakespeare Limited Warranty: 5 years Technical Specifications: Frequency: VHF Marine Band Bandwidth: 3 MHz within 2.0:1 VSWR SWR: nominally 1.5:1 at 156.8 MHz Impedance: 50 ohms Gain: 8 dB Max Input (Watts): 200 watts DC Ground: YES Height (feet): 14 Polarization: Vertical

Shakespeare Style 5911 THE STOWAWAY™ Emergency VHF Flex Antenna Unity Gain LOADED 1/4 WAVE WHIP Comes packed in a 12™ weather-resistant, plastic tube which can ™stow away™ in an easy-to-reach location for instant emergency capability if your main antenna becomes broken or disabled. Complete with 12' cable, connector, and rubber suction cup for fast, easy mounting to any smooth horizontal surface. Flexible vinyl outer covering 10™ overall length Velcro strips for storage included Technical Specifications: Frequency: VHF Marine band Bandwidth: N/A SWR: Adequate across Marine Band. Precise SWR depends on antenna location Impedance: (Ohms): 50 Gain: Unity Max Input (Watts): 25 DC Ground: YES Termination: 12' RG-58 cable Height (feet): 10" Polarization: Vertical Radiation pattern: Omini-directional

5309-R 23' Galaxy VHF Antenna THIS PRODUCT MUST SHIP TRUCK FREIGHT AND DOES NOT QUALIFY FOR ANY SHIPPING PROMOTIONS Phased 1/2 wave elements in collinear array with a band spread matching sleeve and a choking stub to suppress cable radiation This design invokes all the antenna engineers tricks to produce the clearest possible transmission and reception over the longest range. Features: Brass and copper elements Stainless steel ferrule with standard 1"-14 thread Includes 20' RG-8/X cable and a PL-259 connector Suggested mount: Shakespeare Style 409-R or 410-R Mounting Kit (pictured mount not included) Two sections: Base 172", Tip 105" Twin to: Galaxy Style 5310-A HF/SSB Shakespeare Limited Warranty: 5 years Includes FME Cables Technical Specifications: Frequency: VHF Marine Band Bandwidth: 5 MHz within 2.0:1 VSWR SWR: nominally 1.5:1 at 156.8 MHz Gain: 9 dB Max Input (Watts): 150 watts DC Ground: NO Height (feet): 23' Polarization: Vertical

Shakespeare Style 5215-C-X SQUATTY BODY® VHF Marine 36" LENGTH, 3dB END-FED 1/2-WAVE STAINLESS STEEL WHIP Same as the Style 5215 but comes with 60' RG-8/X low-loss cable and PL-259 connectors. A favorite with Sailboat owners, this lightweight, low profile, stainless steel antenna is specially designed for masthead mounting. Hermetically sealed, tin-plated copper wire coil Stainless steel body and whip SO-239 connector Includes 60' RG-8/X low-loss cable and PL-259 connectors. Mount: Stainless steel "L" bracket supplied, for mast mounting One section Shakespeare Limited Warranty: 2 years Technical Specifications: Frequency: VHF Marine band Bandwidth: 7 MHz SWR: 1.5:1 @ 156.8 MHz Impedance: (Ohms): 50 Gain: 3 dB Max Input (Watts): 50 DC Ground: NO Termination: 60' RG-8X cable Height (feet): 3' Polarization: Vertical Radiation pattern: Omni-directional

5400-XT Galaxy 4' VHF Antenna  Center-fed 1/2 wave coaxial sleeve The compact Galaxy® 5400-XT is an outstanding, general purpose 4' antenna of heavy duty construction for general purpose communications. Its at home on T-tops, hard-tops, and other positions aloft, where its small size can deliver maximum range. Features: Brass and copper elements for maximum range Stainless steel ferrule with standard 1"-14 thread Includes 20' RG-8/X cable and a PL-259 connector Suggested mount: Shakespeare Style 4187 Ratchet Mount One section Shakespeare Limited Warranty: 5 years Includes FME Cables Technical Specifications: Frequency: VHF Marine Band Bandwidth: 5 MHz within 2.0:1 VSWR SWR: nominally 1.5:1 at 156.8 MHz Gain: 3 dB Max Input (Watts): 50 watts Height (feet): 4

6500-WB 4FT Broad Band VHF Antenna 3dB Built for maximum performance, this 4’ broad band antenna is designed to endure the harsh environment and communication requirements in commercial, law enforcement and disaster management applications. Whether you install it on a vessel, base station, or a stationary platform, this antenna provides a host of mounting options to fit your need. No tuning or ground plane required. Cable not included. Features: Stainless steel mounting bracket: corrosion resistant even in marine environments. Patent pending mount design: install the U-bolts without removing hardware – no more lost hardware Detachable antenna: handle mounting bracket easily without the weight of the antenna. Mount it on a large variety of Shakespeare® mounts with a 1”-14 thread* IP67**, high wind rating, wide temperature range, and PU Coating: built to last in rain, sun, ice, dust, water splashes and even corrosive marine environments *Requires a Shakespeare 4006 double female ferrule (not included). **When installed as instructed.

4' VHF/AIS White Antenna with 15' Cable The 594-MW is one antenna designed for the best performance on VHF and AIS signals. To ensure the most incredible AIS and VHF range, Digital Antenna’s new 4.5dB gain AIS/VHF antenna features a less than 1:5:1 SWR on both the VHF (156MHz) and AIS (162MHz) frequencies. Digital VHF radio-based transponder systems need antennas designed for digital signals. Digital Antenna is the only manufacturer to design all antennas to maintain and maximize digital signals for the best transmit and receive range. Ideal for use on any size commercial or recreational vessel. Perfect for use with combined VHF/AIS radios. Factory-installed mini-UHF connector (less than 3/8” OD) and included PL259 adapter make a quick and secure connection to the radio. (no soldering needed). Features: Designed for Digital AIS/VHF signals 4.5dBi Omni-directional gain Rugged fiberglass rod with UV stable finish Secure soldered connections 316 stainless steel base 1”x14 female threaded base 15’ premium low-loss RG-8X cable Factory-installed mini-UHF connector 5-year warranty Specifications: Radiation: Pattern Omni-Directional Gain: 4.5dBi Bandwidth: VSWR: < 1.5:1 = 1 56-162.5 MHz (6.5MHz) Cable: 15’ Digital Antenna exclusive low loss RG-8X Impedance: 50 ohms Max Input Power: 50 watts Exterior Finish: White polyurethane high gloss UV stable Dimensions: 4’ length x 1” OD taper Weight: 1.7 lbs RF Connector: Mini-UHF female with included PL259 adapter Installation: 1”x14tpi female threaded base Elements: Brass - Hand soldered Polarization: Vertical Wind Rating: >160KPH Operating Temp: 30º F to +175º F Warranty: 5 Years Compliance: Automatic Identification System (AIS) Use with all AIS class A and B transceivers, AIS transponders, Smart AIS transponders, AIS receivers, auxiliary civil services, multi-use radio service (MURS), 2-way land mobile, VHF marine radio, narrow band FM, VHF SATCOM, Automatic Identification System (AIS), and NOAA Weather Stations. Applications:  Commercial Recreational Government vessels where AIS is required

B954 Class B AIS Transceiver - 5W SOTDMA with WiFi, Bluetooth, & VHF Antenna Splitter **As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.** Click here to download form. The B954 is the most feature-rich high transmit power (5W SOTDMA) AIS transceiver in the B900 range. The B954 combines Wi-Fi & Bluetooth for seamless wireless connectivity and AIS data streaming to any mobile device, PC or wearable, with an integrated VHF antenna splitter to enable your transceiver to share your existing VHF antenna without any loss of performance. Like all B900 transceivers, it also includes an integrated next-generation GPS receiver and antenna and is designed for em-trak's unique FLEXI-FIT® bracket system to make installation as easy as possible. Lightweight and completely weatherproof, the B954 delivers the very best AIS receive and transmit performance with increased range and transmission priority. Your transceiver will also work with our CONNECT-AIS mobile phone app to make programming, configuration, and transceiver health monitoring simple and convenient. Features: Certified AIS Class B – 5W SOTDMA Integrated WiFi and Bluetooth Integrated VHF antenna splitter Global certification - USCG / FCC / Canada / Europe SRT-AIS™ Transceiver Engine for superlative proven performance FLEXI-FIT™ bracket system for easy, convenient, and secure installation Internal high-performance GPS receiver and antenna (external antenna optional) Water, pressure spray, and damp proof (IPx6, IPx7 certified) Protected from vibration, shock, and extreme temperatures Small and lightweight Ultra-low power consumption – best in class Guaranteed connectivity and interoperability with any app, chart plotter, smartphone, tablet, or PC NMEA 0183 & NMEA 2000 Automated health and performance monitoring Silent mode (transmit-off) function Enhanced RF screening to protect against electromagnetic interference Built-in power surge protection Fail-safe VHF radio operation Physical & Environmental Specifications: Size (H x W x D): 150 x 115 x 45mm Weight: 425kg Operating temperature: -25°C to +55°C Storage temperature: -25°C to +70°C Ingress protection: IPx6 and IPx7 Electrical Specifications: Supply voltage: 12V or 24V DC Supply voltage range: 9.6V - 31.2V DC Average current (at 12V): 280mA Average current (at 12V) (wireless off): 245mA Peak current: 2.5A Average power consumption (at 12V): 3.4W Average power consumption (at 12V) (wireless off): 2.9W Galvanic isolation: NMEA 0183 inputs only, NMEA 2000, VHF antenna port Connectors: VHF antenna: SO-239 VHF radio: SO-239 GNSS: TNC Power: 12-way circular multipole NMEA 2000: 5-way Micro-C connector USB: USB Micro-B Data Interfaces: NMEA 0183: 2 x bi-directional ports NMEA 2000: NMEA 2000 Ed 3.101, LEN=1 USB: PC virtual com port for NMEA 0183 data Wi-Fi: IEEE 802.11 (a/b/g), client and access point mode supported (2 connections in access point mode) Bluetooth: BT Classic 4.0, 7 concurrent connections Standards Compliance: AIS standards: IEC 62287-2 Ed. 2, ITU-R M.1371.5 Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 EN62311:2008 Environmental standards: IEC 60945 Ed. 4 Serial data interface standards: IEC 61162-1 Ed 5.0, IEC 61162-2 Ed 1.0 NMEA 2000: NMEA 2000 Ed 3.101 GNSS performance standards: IEC 61108-1 Ed 2.0, IEC 61108-02 Ed 1.0 GNSS: Systems supported: GPS, GLONASS, BeiDou, Galileo (two of any combination, three including GPS, Galileo) Channels: 72 Internal/external antenna: Internal or optional external antenna Time to first fix from the cold start: 26s VHF Transceiver: VDL access scheme: SOTDMA Operating frequency: 156.025MHz - 162.025MHz Channel bandwidth: 25kHz Receivers/transmitters: 2 x receivers, 1 x transmitter AIS receiver sensitivity (20% PER): -111dBm AIS transmitter power: 5W (+37dBm) User Interface: Indicators: Power, transmit timeout, error, silent mode In the Box: 1 x AIS transceiver 1 x Power and data cable (2M) 1 x VHF radio accessory cable 1 x FLEXI-FIT™ mounting bracket Complete with screws & optional fixing tape

B924 Class B AIS Transceiver with WiFi, Bluetooth & VHF Antenna Splitter - 2W CSTDMA **As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.** Click here to download form. The most feature-rich 2W CSTDMA AIS transceiver in the B900 range. The B924 includes WiFi & Bluetooth for seamless wireless connectivity and AIS data streaming to any mobile device, PC, or wearable, with an integrated VHF antenna splitter to enable your transceiver to share your existing VHF antenna without any loss of performance. Like all B900 transceivers, it also includes an integrated next-generation GPS receiver and antenna and is designed for em-trak's unique FLEXI-FIT® bracket system to make installation as easy as possible. Exceptionally lightweight and completely weatherproof, the B924 delivers the very best (2W) AIS receive and transmit performance, so you see all AIS information and targets, even at maximum range. Your transceiver will also work with our CONNECT-AIS mobile phone app to make programming, configuration, and transceiver health monitoring simple and convenient. Features: Certified AIS Class B – 2W CSTDMA Integrated WiFi and Bluetooth Integrated VHF antenna splitter Global certification - USCG / FCC / Canada / Europe SRT-AIS™ Transceiver Engine for superlative proven performance FLEXI-FIT™ bracket system for easy, convenient, and secure installation Internal high-performance GPS receiver and antenna (external antenna optional) Water, pressure spray, and damp proof (IPx6, IPx7 certified) Protected from vibration, shock, and extreme temperatures Small and lightweight Ultra-low power consumption – best in class Guaranteed connectivity and interoperability with any app, chart plotter, smartphone, tablet, or PC NMEA 0183 & NMEA 2000 Automated health and performance monitoring Silent mode (transmit-off) function Enhanced RF screening to protect against electromagnetic interference Built-in power surge protection Physical & Environmental Specifications: Size (H x W x D): 150 x 115 x 45mm Weight: 425kg Operating temperature: -25°C to +55°C Storage temperature: -25°C to +70°C Ingress protection: IPx6 and IPx7 Electrical Specifications: Supply voltage: 12V or 24V DC Supply voltage range: 9.6V - 31.2V DC Average current (at 12V): 280mA Average current (at 12V) (wireless off): 245mA Peak current: 2A Average power consumption (at 12V): 3.4W Average power consumption (at 12V) (wireless off): 2.9W Galvanic isolation: NMEA 0183 inputs only, NMEA 2000, VHF antenna port Connectors: VHF antenna: SO-239 VHF radio: SO-239 GNSS: TNC Power: 12-way circular multipole NMEA 2000: 5-way Micro-C connector USB: USB Micro-B Data Interfaces: NMEA 0183: 2 x bi-directional ports NMEA 2000: NMEA 2000 Ed 3.101, LEN=1 USB: PC virtual com port for NMEA 0183 data WiFi: IEEE 802.11 (a/b/g), client and access point mode supported (2 connections in access point mode) Bluetooth: BT Classic 4.0, 7 concurrent connections Standards Compliance: AIS standards: IEC 62287-1 Ed. 3, ITU-R M.1371.5 Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 EN62311:2008 Environmental standards: IEC 60945 Ed. 4 Serial data interface standards: IEC 61162-1 Ed 5.0, IEC 61162-2 Ed 1.0 NMEA 2000: NMEA 2000 Ed 3.101 GNSS performance standards: IEC 61108-1 Ed 2.0, IEC 61108-02 Ed 1.0 GNSS: Systems supported: GPS, GLONASS, BeiDou, Galileo (two of any combination, three including GPS, Galileo) Channels: 72 Internal/external antenna: Internal or optional external antenna Time to first fix from the cold start: 26s VHF Transceiver: VDL access scheme: CSTDMA Operating frequency: 156.025MHz - 162.025MHz Channel bandwidth: 25kHz Receivers/transmitters: 2 x receivers, 1 x transmitter AIS receiver sensitivity (20% PER): -111dBm AIS transmitter power: 2W (+33dBm) User Interface: Indicators: Power, transmit timeout, error, silent mode In the Box: 1 x AIS transceiver 1 x Power and data cable (2M) 1 x VHF radio accessory cable 1 x FLEXI-FIT™ mounting bracket Complete with screws & optional fixing tape