|
250/120ST Transom Mount Transducer
Features:
Single Frequency: 120 kHz
Max Power: 600W
Beam Angle: 15 degrees
Housing: Plastic
Mount: Transom Mount
Plug: 8 Pin
Cable: 30'
Temp: Yes
Speed: Yes
For SI-TEX models: CVS106, 106MKII, 106L, 106MLKII
|
126.00 |
|
|
SI-TEX 492/50/200ST Transom Mount Transducer f/ES502
Dual Frequency 50/200 kHz
Max Power: 500W
Beam Angle: 42 deg. @ 50 kHz, 12 deg. @ 200 kHz
Housing: Plastic
Mount: Transom
Plug: 8
Cable: 30'
Temp: Yes
Speed: Yes
For SI-TEX model: ES502
|
252.00 |
|
|
P66 Transom Mount Transducer f/Humminbird 9-Pin Units
Features:
Depth and temperature in one housing
Plastic kick-up bracket
Accommodates transom angles between 2° and 20°
Recessed waterflow channel protects paddlewheel
Transducer can be removed from bracket without the use of tools for easy service and storage
Boat Size: Up to 12M (40')
Frequency: 50/200 kHz
Beamwidth: 50 kHz-45°, 200 kHz-11°
RMS Power: 600W
10M Cable
Fits: All 800, 900 & 1100 Series except 967 3D
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
200.80 |
|
|
SI-TEX 250/50/200ST Transom Mount Transducer
Dual Frequency 50/200 kHz
Max Power: 600W
Beam Angle: 45 deg. @ 50 kHz, 11 deg. @ 200 kHz
Housing: Plastic
Mount: Transom
Plug: 8 pin
Cable: 30'
Temp: Yes
Speed: Yes
For SI-TEX model: CVS106MKIIDF, 106L, 106MKII, 832, 833, Genesis
|
126.00 |
|
|
250C/50/200ST-CX Transom Mount Transducer
SI-TEX 250C/50/200ST-CX Transom Mount Transducer for the CVS-126 and CVS-128.
|
173.99 |
|
|
DownVü™/SideVü™ 12-Pin Transom Mount Transducer for GCV™ 10
Get ultra-clear sonar pictures of objects, structure and fish that pass below and to the side of your boat with this 12-pin transducer.
This 20' transducer cable with built-in fast response temperature sensor has a power rating of 500 W per element (1,500 W total); a depth of 750 ft
(DownVü™) and 500 ft left and right (SideVü™) an operating frequency of 455/800 kHz; and a 0 to 70 transom angle. Pair it with your GCV™ 10 black box sonar.
Transducer comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
Compatible Devices:
GCV™ 10
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
188.99 |
|
|
Transom Mount Transducer for StructureScan 3D
Includes transducer, transom mounting bracket and assembly and mounting screws, washers and nuts.
|
452.20 |
|
|
XNT-9-DB-74-T
Transom Mount Transducer
f/1159ci HD XD | 959ci HD XD | 859ci HD XD | 688ci HD XD, 678c HD XD
Mount on the transom(Back of the boat)
The impact release feature pivots transducer out of the way if struck by an object.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
101.29 |
|
|
50/200 HDI Transom Mount Transducer for HOOK Reveal
HDI Skimmer® transducer 50/200 / 455/800kHz for HOOK²/HOOK Reveal, with built in temp. Includes mounting bracket and hardware. Cable Length 6 m (20 ft). Connector: 8 pin push fit.
Hybrid Dual Imaging™ (HDI) transducer (50/200/455/800) - The power of two award-winning technologies -- Broadband Sounder PLUS Exclusive DownScan Imaging™ -- combined to provide the best-possible view beneath your boat.
|
219.82 |
|
|
GCV™ 20 Ultra HD Scanning Sonar Black Box with GT34UHD-TM Ultra HD Transom Mount Transducer
Add Ultra High-Definition Scanning Sonar to Your Compatible Chartplotter
The easy-to-install, networkable GCV 20 sonar black box allows you to redefine clarity and detail. Add any of the 3 GT34UHD transducer models to see stunningly clear Ultra High-Definition ClearVü and Ultra High-Definition SideVü scanning sonars — with frequencies ranging from 0.8 MHz (800 kHz) to 1.2 MHz (1,200 kHz) — to your compatible chartplotter. And you can share sonar images seamlessly across multiple networked chartplotters as well as networking Panoptix™ all-seeing sonar. It includes a max power output of 500 watts.
Ultra High-Definition ClearVü Scanning
This mode provides brilliant image clarity of structure and fish below your boat at greater depths than other high-frequency scanning sonars by putting more power on targets via a downward-facing element.
Ultra High-Definition SideVü Scanning
This mode delivers stunningly clear images of structure and fish off to the sides of your boat. This makes it easy to scout a fishing area quickly, because you can see everything the first time with such amazing clarity.
Specifications:
General:
Physical dimensions: 9.9"×7.6"×2.6" (251mm × 192mm × 66mm)
Weight: 1.86lbs (845g)
Water rating: IPX7
Garmin Marine Network™ ports: 3
Temperature range: From 5°F to 158°F (from -15°C to 70°C)
Sonar Features & Specifications:
Frequencies supported:
Ultra High-Definition ClearVü: 0.8 MHz (800 kHz), CHIRP range: 760-880 kHz
Ultra High-Definition SideVü: 1.2 MHz (1,200 kHz), CHIRP range: 1,060-1,170 kHz
Transmit power: 500W rms
Maximum depth:
200' Ultra High-Definition ClearVü
125' to each side Ultra High-Definition SideVü, 250' total
What's In The Box?:
GCV 20
Right-angle power cable
Right-angle ethernet cable
Mounting hardware
Documentation
GT34UHD-TM Ultra HD Transom Mount Transducer
Ultra High-Definition Sonar System Transom Mount Transducer
Add stunningly clear Ultra High-Definition ClearVü and Ultra High-Definition SideVü scanning sonar images to your compatible chartplotter via the GCV™ 20 sonar module. It includes 3 arrays, including a downward-facing element, with frequencies ranging from 0.8 MHz (800 kHz) to 1.2 MHz (1,200 kHz).
Ultra High-Definition ClearVü Scanning
This mode provides brilliant image clarity of structure and fish below your boat at greater depths than other high-frequency scanning sonars by putting more power on targets via a downward-facing element.
Ultra High-Definition SideVü Scanning
This mode delivers stunningly clear images of structure and fish off to the sides of your boat. This makes it easy to scout a fishing area quickly, because you can see everything the first time with such amazing clarity.
Specifications:
Frequency:
Ultra High-Definition ClearVü: 0.8 MHz (800 kHz), CHIRP range: 760-880 kHz
Ultra High-Definition SideVü: 1.2 MHz (1,200 kHz), CHIRP range: 1,060-1,170 kHz
Power: 500W
Beamwidth:
Ultra High-Defintion ClearVü: 0.74° x 46°
Ultra High-Defintion SideVü: 0.44° x 55°
Maximum depth
Ultra High-Defintion ClearVü: 200' down
Ultra High-Defintion SideVü: 125' sides, 250' total
Depth/Speed/Temperature: Depth and Temperature
Number of pins: 12-pin
Cable length: 20'
Supported deadrise/Transom angles: 0°-70° degree transom
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
566.99 |
|
|
XM 9 HW MSI T MEGA Side Imaging+™ Transom Mount Transducer
MEGA Side Imaging+ Transom Mount Transducer supports MEGA Imaging+/800kHz/455kHz and Dual Spectrum CHIRP 2D Sonar with a CHIRP range of 150-220kHz. Includes built-in temperature sensor, all metal bracket and 20’ cable.
Features:
This accessory is compatible with the following Humminbird products: HELIX 8 CHIRP MEGA SI+ GPS G3N, HELIX 9 CHIRP MEGA SI+ GPS G3N, HELIX 10 CHIRP MEGA SI+ GPS G3N, HELIX 12 CHIRP MEGA SI+ GPS G3N
Dual Spectrum CHIRP Frequencies: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz
Dual Spectrum CHIRP Max Depth: 1200ft (365m)
MEGA Side Imaging+ Frequencies - Max Range (side-to-side): 455kHz: 440-500 kHz - 800ft (244m), 800kHz: 790-850 kHz - 250ft (76m), MEGA SI+: 1075-1150 kHz - 400ft (122m)
MEGA Down Imaging+ Frequencies - Max Depth: 455kHz: 440-500 kHz - 400ft (122m), 800kHz: 790-850 kHz - 125ft (38m), MEGA DI+: 1075-1150 kHz - 200ft (61m)
1-Year Limited Warranty
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
390.94 |
|
|
XM 9 HW MDI T Transom Mount Transducer
MEGA Down Imaging+ Transom Mount Transducer supports MEGA Imaging+/800kHz/455kHz and Dual Spectrum CHIRP 2D Sonar with a CHIRP range of 150-220kHz. Includes built-in temperature sensor, rugged composite design, impact-release mounting bracket and 20' cable.
Features:
This accessory is compatible with the following Humminbird products: HELIX 8 G3N Series MEGA DI+ and MEGA SI+, HELIX 9 G3N Series MEGA DI+ and MEGA SI+, HELIX 10 G3N Series MEGA DI+ and MEGA SI+, HELIX 12 G3N Series MEGA DI+ and MEGA SI+.
Dual Spectrum CHIRP Frequencies: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz
Dual Spectrum CHIRP Max Depth: 1200ft (365m)
Down Imaging Frequencies - Max Depth: 455kHz: 440-500 kHz - 400ft (122m), 800kHz: 790-850 kHz - 125ft (38m), MEGA DI+: 1075-1150 kHz - 200ft (61m)
1-Year Limited Warranty
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
245.46 |
|
|
TM275C-LHW 1kW Chirp Transom Mount Transducer
Get more coverage under your boat with Airmar’s unique wide beam, high frequency Chirp-ready transducers. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band results in superior resolution. The constant wide beamwidth provides twice the coverage under the boat and excellent fish arches on the display compared to most high frequency narrow beam transducer options.
The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential down to 500'.
The low frequency band and 1 kW of power also provides great deeper water performance. Get the best of both worlds with Airmar’s dual frequency Chirp-ready transducers with wide beam coverage.
Features:
Depth and fast-response water-temperature sensor
1 kW for great deep water performance from the low frequency
Low Frequency: 42 kHz to 65 kHz with maximum depth of 914 m (3000') 25° to 16° beamwidth
High Frequency: 150 kHz to 250 kHz with maximum depth of 152 m (500') 25° constant beamwidth
123 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth
High frequency provides superior shallow water performance, bottom detail and fish target separation
High wide beamwidth provides more coverage under the boat for detecting fish in the upper water column
Transom-mount transducer with stainless steel mounting bracket
Recommended boat size: up to 10 m (32')
Hull Type: Fiberglass, wood, aluminum or steel
Exclusive Xducer ID® technology
Mix and Match Cable Required
Specifications:
Weight: 4 kg (8.9 lb)
Transom Angles: 3° to 21°
Acoustic Window: Urethane
Urethane transducer housing with stainless steel bracket
Eight internal broadband ceramic assemblies
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1781.26 |
|
|
TM165HW Chirp High Wide 600W Transom Mount Transducer - Requires Adapter Cable
Replacing a non-Chirp or single frequency transducer with the AIRMAR TM165HW (High Wide) 600W Chirp-ready transom mount transducer provides anglers with an inexpensive and easy performance upgrade to their current sonar systems. The TM165HW is legendary for producing the finest detail and largest coverage area of any transom mounted model in its class.
The TM165HW is perfect for fishing boats up to 25 feet (8 meters) and recommended for planing hulls made from fiberglass, metal or wood - both outboard and IO.
TM165HW delivers large, crisp return images on the display with a noise-free, clear picture of the action below. Better coverage from top to bottom with stronger, well-defined fish targets.
Super Wide 30° Average Beamwidth Achieves 3x the Coverage Under the Boat as Compared to Standard High Frequency Chirp-ready Transducers (eg, the popular B75H)
The TM165HW is compatible with the following sonar brands and models:
Lowrance: All models compatible except Hook series
Humminbird: SM300; Helix and Solix can be set manually
Garmin: GPSMAP 7600, 8600, 7X2/9X2/10x2/12x2, GSD26
Raymarine: compatible with all models
Simrad: compatible with all models
Features:
Depth and fast-response water-temperature sensor
Requires Mix and Match cable
600 W with a maximum depth of 152 m (500')
High Frequency: 150 kHz to 250 kHz for superior shallow water performance, bottom detail and fish target separation
High-wide beamwidth provides more coverage under the boat for detecting fish in the upper water column
Super wide 30° average beamwidth for superior coverage under the boat and maximum detection area
High-performance, low-profile design provides excellent resolution at speed when installed properly
Exclusive Xducer ID® technology
The TM165HW is an AIRMAR Mix and Match transducer. 600W Mix and Match transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
421.02 |
|
|
120kHz Bronze Thru-Hull Transducer f/SDD-110
Features:
120kHz
Bronze
Thru-Hull Transducer
Specifically for SI-TEX SDD-110
|
145.46 |
|