1-1/4" Black Light Bar for Open Array Radar up to 4.5' - Must Pick LTB Top Seaview light bars are made from aluminum and powder-coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars are also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance. Easy Installation Secured with a stainless steel clamp, simply use the supplied four bolts.

28" Pre-Drilled Dual Mount for Open Array Radars Up to 4.5' - Black - Top Plate Required Install your sat dome, camera, or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. The oval hollow mast section allows for easy cable management. Compact Design Specifically designed to not take up a large number of space results in the perfect solution where space saving is a must.   Eliminate Interference A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for a cleaner installation. Universal The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or an open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.   Modular Top Plate The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them.  *Top Plate Sold Seperately

1-1/4" Black Light Bar for FLIR & Searchlights - Folds Over 90° - Must Pick LTB Top Seaview light bars are made from aluminum and powder-coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars are also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance  Many Styles There are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars, and cameras/searchlights. Easy Installation Secured with a stainless steel clamp, simply use the supplied four bolts. 

1-1/4" Black Light Bar for 20" or Smaller Satdomes - Folds Over 90° - Must Pick LTB Top Seaview light bars are made from aluminum and powder-coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars are also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance. Many Styles There are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars, and cameras/searchlights. Extra Height Clearance On select Seaview light bar models, some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction. Easy Installation Secured with a stainless steel clamp, simply use the supplied four bolts

23.75" Pre-Drilled Dual Mount for Open Array Radars Up to 4.5' - Black - Top Plate Required Install your sat dome, camera, or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. The oval hollow mast section allows for easy cable management. Compact Design Specifically designed to not take up a large number of space results in the perfect solution where space saving is a must. Eliminate Interference A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for a cleaner installation. Universal The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or an open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount. Modular Top Plate The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them.  *Top Plate Sold Separately

1-1/4" Light Bar for Open Array Radar Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance. Easy Installation Secured with a stainless steel clamp, simply use the supplied four bolts.  

Light Arm for Open Array Radars Edson's 68660 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Open Array Radar. Light Arm extends 28" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights. Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical).  Specifications: Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately) Base mounts sold separately

Light Bar for M100 & M200 FLIR for M2 Mounts Only - Must Pick LTB Top A 2” diameter Light Bar designed to work with FLIR M100/M200 Series. Contact Seaview directly to make sure this light bar is right for your boat. Not intended for fast ocean going boats. Will not work with 24” satdomes. This will clear 20” satdomes or smaller

2" Diameter Compact Light Bar f/Thermal Cameras, Spotlights & Nav Light To Clear Closed Dome Radars *Must Pick an LTB TOP A compact 2” diameter light bar designed to fit Seaview modular mounts that will elevate most searchlights, thermal cameras with the universal plate, and a nav light above closed dome radars. This will clear 18-24" diameter closed dome radars with the exception of Raymarine RD424.  Works with Mounts ending in M1 or M2. * Will work for all FLIR models, WITH THE EXCEPTION OF THE FLIR M300C, M332, M364, M364C ** Will clear 18"-24" closed dome radars, WITH THE EXCEPTION OF THE RAYMARINE RD424

4 Degree Wedge for Open Array Radars Improve your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more! Simple and Easy Installation Pre-drilled to fit your specific radar, allowing for quick and easy hassle free installation.  Durable Made from marine grade polymer Compatible Manufacturers: Furuno Garmin Koden Simrad Sitex

4 Degree Wedge for Open Array Radars Improve your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more! Simple and Easy Installation Pre-drilled to fit your specific radar, allowing for quick and easy hassle free installation.  Durable Made from marine grade polymer Compatible Manufacturers: Raymarine

APT-F-LB-01 PowerTower® Center Mounted Light Bar for Forward Leaning Radar Mounts Central light bar for all forward learning PowerTowers® Compatible with: Scanstrut forward leaning PowerTower® radar mounts Features: All mounting holes are predrilled for easy retrofit installation, attach using mounting bolts, no extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - 316 Stainless Steel Height - 25.4" (404mm) Mount Position - Center In the Box: Light bar Instruction manual *Sold as an Individual

Vision Series Mount - 6" Aft Angled - Heavy Duty for Open Array Radars The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements. Features: All-new sleek, modern design First all modular system - extremely versatile Simple selection and installation Easy to add accessories Powder coated aluminum Requires Vision Mounting Plate to install radar or sat dome antenna 6" Heavy Duty Aft Mount 6" Tall Aft raked 30 degrees

GMR Fantom™ 124 - 4' Open Array Radar Open-array Radar with Industry-leading 120 W Solid-state Output Power Features: 4’, 120 W solid-state open-array radar with pedestal MotionScope™ technology detects and highlights moving targets in different colors to help avoid collisions, find flocks of birds and track weather Pulse Compression technology provides high-resolution imaging while maximizing energy to enhance target detection and identification True echo trails display a fading trail to help you quickly and easily identify moving targets while accounting for the movement of your own boat Overlay radar on your chart screen as single display or split screen with independent range settings Featuring 120W of power, GMR Fantom 126 is our most powerful 6’ solid-state radar. It uses MotionScope technology to detect and highlight moving targets in different colors, which helps you avoid potential collisions, find flocks of birds and track weather. It includes Pulse Compression technology that provides high-resolution imaging and maximizes energy to help you detect and identify targets. It has a detection range of 20’ to 96 nautical miles. High-power 120W Radar with Narrow Beam You get excellent close- and long-range target detection from as close as 20’ to 96 nautical miles, even in fog or rain. The narrow horizontal beamwidth provides a high-resolution image, and the high antenna gain picks out weak targets at a distance. This radar paints a clear, concise image of the shoreline, other vessels and impending weather — right on your Garmin chartplotter. Get consistent target positions, excellent target separation that helps you distinguish large targets from small ones and adjustable rotation speed for fast screen updates. MotionScope Doppler Technology GMR Fantom uses the Doppler effect to detect and highlight moving targets to help you avoid potential collisions, find flocks of birds and track weather formations. The Doppler effect is the frequency shift in the radar echo due to the relative motion of the target. This allows for instant detection of any targets moving toward or away from the radar. MotionScope highlights the moving targets on the radar display so you can navigate around other boats or severe weather — or toward fishing spots where birds are feeding at the surface. Echo Trails A fading “trail” is left on the screen to help you quickly and easily identify moving targets and potential collision threats. Trails are corrected for your boat’s rotation when an autopilot or heading sensor is connected to your Garmin network. Auto Bird Gain Where there are birds on the water’s surface, there are fish below it. Auto Bird Gain helps you locate flocks of birds at the water’s surface where baitfish are likely to be found. Dynamic Auto Gain and Sea Filter Settings Dynamic Auto Gain automatically adjusts to your surroundings for optimal performance in all conditions. Dynamic Sea Filter automatically adjusts gain to changing sea conditions with user options for low, medium or high filtering. Target Size You can increase the size of targets on screen to help differentiate from noise, or reduce the size to sharpen shoreline details. Dual Range with Radar Overlay The single radar antenna can display radar images on your chartplotter map page side by side, with independent range settings and controls for both close and long range. One or both ranges can also be viewed as a chart overlay. An autopilot or heading sensor is recommended for best results. MARPA Target Tracking Mini-automatic radar plotting aid (MARPA) tracks up to 10 selected targets, helping you keep track of other vessels and avoid collisions. Dual Radar Support This provides redundancy and the ability for each display unit on the boat to select data from 1 of 2 different radar sources. Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Easy Interpretation Variable range markers (VRM) and electronic bearing lines (EBL) allow rapid measurements of distance and bearing to vessels and land. It fits the selected radar range to the vertical size of your display to show more forward-looking radar returns on screen and make it easier to interpret target distances. Easy to Install & Use All our radars are designed to be easy to install and easy to use. There are no complex user settings to adjust; just install your radar, and start using it. You can rely on the GMR Fantom radar to provide reliable, optimum performance in all conditions. In The Box: GMR Fantom 126 antenna and pedestal Mounting hardware kit and template Right angle power cable (15 meters) Right angle network cable (15 meters) Voltage converter Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LTBSF3 Light Bar for Thermal Camera FLIR M300 Series for M2 Mounts Only - Must Pick a LTB Top Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts. These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters and etc. What's also unique with Seaview light bars is that they can fold over 90° to allow for extra height clearance. The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. Many Styles There are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights.