|
Starlink High Performance 5" Pedestal Mount with ADASTLKA Starlink Top Plate - Black
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
403.20 |
|
|
Starlink High Performance 5" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
403.20 |
|
|
Starlink High Performance 10" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
465.60 |
|
|
Starlink High Performance 16" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
513.60 |
|
|
Starlink High Performance 24" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
609.60 |
|
|
Starlink High Performance 36" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
710.40 |
|
|
Starlink High-Performance Flat Dish Mounting Plate
Edson's Starlink mounting plate allows you to mount a High-Performance Flat Dish to our Vision Series mounts. Choose the Starlink plate as "Step 2" in our 3-step Vision Series system and you're on your way.
Powder-coated white matches the Vision Series line, including mounting hardware and Tef-Gel thread protectant.
*For High-Performance Flat Dish mounting only.
**For Dish pole mounting, please see Edson part # 68881
|
130.36 |
|
|
5" Aft Leaning Mount with ADAR1 Top Plate
This Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost-effective choice.
Included ADAR1 Top Plate
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "Swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
|
374.40 |
|
|
6" Aluminum PowerTower Mount for Starlink
Engineered for Starlink Flat High-Performance
150mm (6”) high and constructed from the best marine-grade aluminum, designed to fit Starlink's Flat High-Performance Model.
Install your Starlink with precision on the roof, T-top, flybridge, or radar arch of your powerboat. It guarantees obstacle clearance and positions your Starlink at an ideal 8° angle for optimal connectivity. Designed for the harsh marine environment, it's tailored to fit Starlink High-Performance. Pre-drilled mounting holes allow secure fastening directly to the tower, while the built-in Scanstrut Cable Seal ensures a watertight installation, eliminating the need to remove Starlink connectors during installation. The paint finishes adhere to our exclusive 4-step marine paint system, and it's crafted from premium marine-grade aluminum.
Features:
Designed to fit, designed to fit Starlink High-Performance.
Pre-drilled mounting holes allow Starlink to fasten straight to the PowerTower
No need to cut the cable connectors off for installation
Marine sealant is not required
Paint finishes comply with our unique 4-step marine paint system
A range of accessories light bars can be bolted to the back of the PowerTower
|
324.00 |
|
|
14" x 12" High Performance Trim Tab Kit w/o Switch Kit-12V - Single Actuator
Lenco HP Single & Dual Actuator Electric Trim Tab Kits feature electro-polished 7 Gauge 304SS Blades & Sacrificial Anodes. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Each kit is factory assembled with extreme duty actuators with 3/8" SS bolts, a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
Kit Contents:
2 each of stainless steel trim tab planes
2 each of #15056-001 XD extreme duty actuators with 6' lead & Deutsch plugs
Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
The following to be supplied by customer:
Boat mounting hardware supplied by customer
Actuator extension harnesses (2 for single actuator application or 4 for dual) will be
required. To order the lengths of your choice see the Lenco Accessories Section.
Specifications:
Suggested Boat Length: 16' to 32'
Length of Tab: 14"
Width of Tab: 12"
Minimum Transom Height: 10.5"
Blades: 7 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Switch Required: 10222-211D, 15069-001
or 15070-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1511.23 |
|
|
18" x 12" High Performance Trim Tab Kit w/o Switch Kit-12V - Single Actuator
Lenco HP Single & Dual Actuator Electric Trim Tab Kits feature electro-polished 7 Gauge 304SS Blades & Sacrificial Anodes. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Each kit is factory assembled with extreme duty actuators with 3/8" SS bolts, a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
Kit Contents:
2 each of stainless steel trim tab planes
2 each of #15056-001 XD extreme duty actuators with 6' lead & Deutsch plugs
Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
The following to be supplied by customer:
Boat mounting hardware supplied by customer
Actuator extension harnesses (2 for single actuator application or 4 for dual) will be
required. To order the lengths of your choice see the Lenco Accessories Section.
Specifications:
Suggested Boat Length: 20' to 40'
Length of Tab: 18"
Width of Tab: 12"
Minimum Transom Height: 10.5"
Blades: 7 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Switch Required: 10222-211D, 15069-001
or 15070-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1575.28 |
|
|
21" x 14" High Performance Trim Tab Kit w/o Switch Kit-12V - Dual Actuator
Lenco HP Single & Dual Actuator Electric Trim Tab Kits feature electro-polished 7 Gauge 304SS Blades & Sacrificial Anodes. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Each kit is factory assembled with extreme duty actuators with 3/8" SS bolts, a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
Kit Contents:
2 each of stainless steel trim tab planes
4 each of #15056-001 XD extreme duty actuators with 6' lead & Deutsch plugs
Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
The following to be supplied by customer:
Boat mounting hardware supplied by customer
Actuator extension harnesses (2 for single actuator application or 4 for dual) will be
required. To order the lengths of your choice see the Lenco Accessories Section.
Specifications:
Suggested Boat Length: 24' to 42'
Length of Tab: 21"
Width of Tab: 14"
Minimum Transom Height: 10.5"
Blades: 7 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Switch Required: 15071-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2216.93 |
|
|
25" x 14" High Performance Trim Tab Kit w/o Switch Kit-12V - Dual Actuator
Lenco HP Single & Dual Actuator Electric Trim Tab Kits feature electro-polished 7 Gauge 304SS Blades & Sacrificial Anodes. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Each kit is factory assembled with extreme duty actuators with 3/8" SS bolts, a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
Kit Contents:
2 each of stainless steel trim tab planes
4 each of #15056-001 XD extreme duty actuators with 6' lead & Deutsch plugs
Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
The following to be supplied by customer:
Boat mounting hardware supplied by customer
Actuator extension harnesses (2 for single actuator application or 4 for dual) will be
required. To order the lengths of your choice see the Lenco Accessories Section.
Specifications:
Suggested Boat Length: 28' to 46'
Length of Tab: 25"
Width of Tab: 14"
Minimum Transom Height: 10.5"
Blades: 7 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Switch Required: 15071-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2541.64 |
|
|
1.5" Ball Mount w/2.5" Round Base, Short Arm & 1.5" x 3" Plate f/Humminbird Helix 5 Only
The RAM-202-153-B-202U consists of a round 2.5" diameter round base (Universal AMPs Hole Pattern), short double socket arm and 1.5" x 3" rectangular base. The rectangular base contains four holes with a center to center pattern of 1" x 2.5". For most applications, mount will support up to ten pounds.
Features:
Compatible Devices: Humminbird Helix 5
Center to Center Hole Pattern: 1" x 2.5"
Weight Capacity: 10 lbs.
Overall Height: 5.225"
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1.5" Rubber Ball Size
Note: The "U" in the part number reflects product packaged in poly bag. Hardware for mounting to device not included with purchase.
Weight: 0.19 lbs.
|
44.88 |
|
|
RAM 1.5" Rail Mount w/Double U-Bolt Base & 3.625" Square Base (VESA 75mm x 75mm Hole Pattern)
The RAM-334U consists of a double socket arm, 3.625" square plate with a 75mm X 75mm VESA hole pattern and stainless steel double u-bolt base that will fit pipes from 1" to 1.25" in diameter. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
Material:
Powder Coated Marine Grade Aluminum
U-Bolt Dimensions:
Accommodates rails from 1" to 1.25" in diameter.
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
60.16 |
|