Horizontal (90°) Cable Seal - White The Seaview horizontal (90-degree) cable seal is a streamlined, waterproof seal that has a horizontal orientation. This cable seal fits cable diameters up to 0.53” (13.5mm). It has a plastic housing that is strong and impact-resistant with a captive nut in the base to make it easy to assemble. The tapered rubber bung forms a watertight seal and is supplied with drill tubes allowing you to drill your custom diameter seal. This is also supplied with a thick rubber base gasket. IPX6/IPX8 tested and approved.

Horizontal (90°) Cable Seal - Black The Seaview horizontal (90-degree) cable seal is a streamlined, waterproof seal that has a horizontal orientation. This cable seal fits cable diameters up to 0.53” (13.5mm). It has a plastic housing that is strong and impact-resistant with a captive nut in the base to make it easy to assemble. The tapered rubber bung forms a watertight seal and is supplied with drill tubes allowing you to drill your custom diameter seal. This is also supplied with a thick rubber base gasket. IPX6/IPX8 tested and approved.

DS-HD6-BLK Horizontal Double Cable Seal - Black The best compact horizontal double-entry cable seal The DS-HD6-BLK double horizontal cable seal was designed to eliminate the time-consuming and sub-standard routing of solar panel cables. This seal helps you achieve a sleek, easy-to-fit, and 100% watertight installation every time. Perfect for routing two solar panel cables externally to internally on the roof of boats. This horizontal double-entry cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antenna, and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting.  Features: Watertight installation - 100% waterproof with an IPX68 rating. Installs two (2) cables. Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) up to  - .23" (6 mm)   Height - .87" (22 mm) Width - 2.13" (54 mm) Color - Black Orientation - Horizontal Material - Plastic In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Individual

Horizontal Multi Cable Seal - Black The DS-H-MULTI-BLK takes Scanstrut's much-loved multi-cable seal to the next level. The multi-horizontal cable seal was designed to open new multi-cable routing options. This Scanstrut seal helps users achieve an ultra-clean, easy-to-fit, and 100% watertight installation of large electronics, solar, and light cables Features: Designed for the installation of large electronics, solar, and light cables 100% waterproof– IP68 Designed to fit one to four cables of varying sizes Self-drill, easy installation that cuts down your installation time through wood, metal, and GPR Long-life marine-grade glass-filled Nylon Rigorously tested to be UV stable and hard-wearing There is no messy sealant on the bung A low-profile construction with a height of 35.8mm It is designed to have a compact footprint of 114.8 mm in width and 97.6mm in length. Captive nuts make for easy assembly and reliable repeat installation

Horizontal Double Cable Seal - Black The DS-HD10-BLK double horizontal cable seal was designed to eliminate time-consuming and sub-standard routing of cables for rooftop lights and electronics. The seal helps you achieve a sleek, easy-to-fit, and 100% watertight installation every time. Perfect for routing two cables externally to internally on the roof of boats. Its low-profile design provides the best water ingress protection in class. Features: Designed for two cables IP68 watertight seal Compact footprint - just 66.5mm (2.61”) W / 75.1mm (2.95”) L / 28.5 mm (1.12”) H Easy-fit cable routing that cuts down your installation time through wood, metal, and GRP Black high-impact plastic Includes 316 stainless steel fixings and a waterproof 3M gasket The low-profile construction is impact-resistant and provides extra protection from water The materials have been selected to be UV- stable and hard-wearing No messy sealant on bungs Install 2 cables – select any combination: 6mm x 2 7mm x 2 8mm x 2 9mm x 2 10mm x 2 Blank x 2

White Plastic Vertical Cable Seal for Wire Up to 13.5mm/0.53" The Seaview Cable Seals (also known as CableClams, Cable Glands, or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation. Features: No need to remove connectors - The split seal design eliminates the need to remove cable connectors during installation.   Watertight installation - Tapered rubber seal forms watertight installation. The base gasket is also provided for a clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant, and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note: *All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

White Plastic Vertical Cable Seal for Wire Up to 27.5mm/1.08" The Seaview Cable Seals (also known as CableClams, Cable Glands, or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation. Features: No need to remove connectors - The split seal design eliminates the need to remove cable connectors during installation.   Watertight installation - Tapered rubber seal forms watertight installation. The base gasket is also provided for a clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant, and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note: *All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

White Plastic Vertical Cable Seal for Multiple Wires Up to 10.6mm/0.5" The Seaview Cable Seals (also known as CableClams, Cable Glands, or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation. Features: No need to remove connectors - The split seal design eliminates the need to remove cable connectors during installation.   Watertight installation - Tapered rubber seal forms watertight installation. The base gasket also provided for a clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant, and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note: *All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Cable Seal with Cover - White Powder Coated Stainless Steel for Wire Up to 10.6mm/0.5" The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation. Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note: *All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Cable Seal with Cover - White Powder Coated Stainless Steel for Wire Up to 13.5mm/.053" The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation. Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note: *All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Cable Seal with Cover - White Powder Coated Stainless Steel for Wire Up to 27.55mm/1.08" The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation. Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note: *All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Polished Stainless Steel Cable Seal - Multi Cables (up to 2-17mm Each) The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation. Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note: *All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Cable Seal with Cover - Black Powder Coated - Stainless Steel Wire - Size 2-10mm The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation. Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note: *All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Black Plastic Vertical Cable Seal for Wire Up to 27.5mm/1.08" The Seaview Cable Seals (also known as CableClams, Cable Glands, or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation. Features: No need to remove connectors - The split seal design eliminates the need to remove cable connectors during installation.   Watertight installation - Tapered rubber seal forms watertight installation. The base gasket is also provided for a clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant, and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note: *All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Grey ABS Plastic Cable Seal - UV Stable - 2 Cables (2-15mm Each) The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation. Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note: *All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.