Black Anodized Aluminum Low-Profile Multi Cable Seal for Cables Up to 15mm The DS-LP-MULTI-BLK Low-Profile Cable Seal is engineered to effortlessly accommodate multiple cables up to Ø15mm (0.59"), ensuring a seamless and impact-resistant solution. Premium Construction Crafted with attention to detail, its marine-grade aluminum construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. Aluminum has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of the aluminum design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation. Low-Profile Design The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 71% in comparison to Scanstrut's DS-MULTI-P-BLK seal. This translates to a clean, flush, more refined look. Watertight Installation Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready. Effortless and Repeat Installations Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option. Features: The cable seal is black IP68 Waterproof Designed for multiple cables up to 15mm (0.59”) UV Resistant Constructed from marine-grade aluminum No messy sealant, ensuring a tidy finish Simplified installation that saves you time and effort Guaranteed 100% watertight seal Perfect for solar panels, light bars, rooftop electronics, and more Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface

Stainless Steel Low-Profile Multi Cable Seal for Cables Up to 15mm The DS-LP-MULTI-S Low-Profile Cable Seal is engineered to effortlessly accommodate multiple cables up to Ø15mm (0.59"), ensuring a seamless and impact-resistant solution. Premium Construction Crafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation. Low-Profile Design The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 61% in comparison to Scanstrut's DS-MULTI seal. This translates to a clean, flush, more refined look. Watertight Installation Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready. Effortless and Repeat Installations Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option. Features: IP68 Waterproof Designed for multiple cables up to 15mm (0.59”). UV Resistant Constructed from marine-grade 316 stainless steel No messy sealant, ensuring a tidy finish Simplified installation that saves you time and effort Guaranteed 100% watertight seal Perfect for solar panels, light bars, rooftop electronics, and more Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface

Black Anodized Aluminum Low-Profile Cable Seal for Cables 9-14mm & Connectors Up to Ø30mm The DS-LP-30-BLK Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 9-14mm (0.35"–0.55") and connectors up to Ø30mm (1.18"), ensuring a seamless and impact-resistant solution. Premium Construction Crafted with attention to detail, its marine-grade aluminum construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. Aluminum has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of the aluminum design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation. Low-Profile Design The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to Scanstrut's DS30-P-BLK seal. This translates to a clean, flush, more refined look. Watertight Installation Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready. Effortless and Repeat Installations Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option. Features: The cable seal is black IP68 Waterproof Designed for 9-14mm cables (0.35"–0.55") UV Resistant Constructed from marine-grade aluminum No messy sealant, ensuring a tidy finish Simplified installation that saves you time and effort Guaranteed 100% watertight seal Perfect for solar panels, light bars, rooftop electronics, and more Each cable seal can be pocketed inside a hole made from a hole saw

Black Anodized Aluminum Low-Profile Cable Seal The DS-LP-16-BLK Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 2–8 mm (0.08"–0.35") and connectors up to Ø16mm (0.63"), ensuring a seamless and impact-resistant solution. Premium Construction Crafted with attention to detail, its marine-grade aluminum construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. Aluminum has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of the aluminum design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation. Low-Profile Design The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 73% in comparison to Scanstrut's DS16-P-BLK seal. This translates to a clean, flush, more refined look. Watertight Installation Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready. Effortless and Repeat Installations Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option. Features: The cable seal is black  IP68 Waterproof Designed for 2-8mm cables (0.08"-0.35") UV Resistant Constructed from marine-grade aluminum No messy sealant, ensuring a tidy finish Simplified installation that saves you time and effort Guaranteed 100% watertight seal Perfect for solar panels, light bars, rooftop electronics, and more Each cable seal is installed by using a hole saw keeping seal technology below the mounting surface

Black Anodized Aluminum Low-Profile Cable Seal for Cables 4-9mm The DS-LP-21A-BLK Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 4–9 mm (0.15"–0.35") and connectors up to Ø21mm (0.82"), ensuring a seamless and impact-resistant solution. Premium Construction Crafted with attention to detail, its marine-grade aluminum construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. Aluminum has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of the aluminum design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation. Low-Profile Design The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to Scanstrut's DS21A-P-BLK seal. This translates to a clean, flush, more refined look. Watertight Installation Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready. Effortless and Repeat Installations Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option. Features: The cable seal is black IP68 Waterproof Designed for 4–9mm cables (0.15"–0.35") UV Resistant Constructed from marine-grade aluminum No messy sealant, ensuring a tidy finish Simplified installation that saves you time and effort Guaranteed 100% watertight seal Perfect for solar panels, light bars, rooftop electronics, and more Each cable seal can be pocketed inside a hole made from a hole saw

Black Anodized Aluminum Low-Profile Cable Seal for Cables 9-14mm & Connectors Up to Ø21mm The DS-LP-21B-BLK Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 9–14 mm (0.3–0.5") and connectors up to Ø21mm (0.83"), ensuring a seamless and impact-resistant solution. Premium Construction Crafted with attention to detail, its marine-grade aluminum construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. Aluminum has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of the aluminum design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation. Low-Profile Design The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to Scanstrut's DS21B-P-BLK seal. This translates to a clean, flush, more refined look. Watertight Installation Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready. Effortless and Repeat Installations Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option. Features: The cable seal is black IP68 Waterproof Designed for 9-14mm cables (0.35"–0.55") UV Resistant Constructed from marine-grade aluminium No messy sealant, ensuring a tidy finish Simplified installation that saves you time and effort Guaranteed 100% watertight seal Perfect for solar panels, light bars, rooftop electronics, and more Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface

Combined Sidelight - 2NM - Black Housing with FB Base This black sidelight is horizontally mounted and has a two-nautical-mile range. The FB base centers the wiring for antenna-type pole mountings. The base provides a screw-down onto the deck solution as well as a from-below mounting. Essentially, the base provides a sleeker, reduced profile.  Features: Black anodized aluminum housing 0.75m cable is included Specifications: Approved To: COLREG72,EN14744,IEC 60945,IACS E10,USCG,ABS,M.E.D.,DNV,LR Mounting: Horizontal EAN: 5704438043299 Min. Feed Wire Gauge: 0.5mm2 AWG22 Light Color: Red and green Visibility: 2NM Included In the Package: 1 Navigation light, pre-cabled with 2.5 meters shielded marine grade cable and installation guide Materials: Black anodized aluminum 25µ, PMMA lens, A4 stainless steel screws, Epoxy, Polyurethane IP rating: IP68 Connection: 2.5m cable Current Consumption (mA @ 24VDC): 90 Current Consumption (mA @ 12VDC): 163 Dimensions Metric: Ø92.5mm x 36mm Dimensions Imperial: Ø3.6" x 1.4" Operating Temperature: -25 degrees C to 55 degrees C Operating Voltage: 10-32VDC Power Draw (W): 2.2 Vessel Size: Under 12 meters

Masthead Light - 3NM - Black Housing with FB Base This black masthead light is horizontally mounted and has a three-nautical-mile range. The FB base centers the wiring for antenna-type pole mountings. The base provides a screw-down onto the deck solution as well as a from-below mounting. Essentially, the base provides a sleeker, reduced profile.  Features: Black anodized aluminum housing 0.75m cable is included Specifications: Approved To: COLREG72,EN14744,IEC 60945,IACS E10,USCG,ABS,M.E.D.,DNV,LR Mounting: Horizontal EAN: 5704438043411 Min. Feed Wire Gauge: 0.5mm2 AWG22 Light Color: White Visibility: 3NM Included In the Package: 1 Navigation light, pre-cabled with 0.75 meters shielded marine grade cable and installation guide Materials: Black anodized aluminum 25µ, PMMA lens, A4 stainless steel screws, Epoxy, and Polyurethane IP rating: IP68   Connection: 0.75m cable Current Consumption (mA @ 24VDC): 80 Current Consumption (mA @ 12VDC): 137 Dimensions Metric: Ø92.5mm x 36mm Dimensions Imperial: Ø3.6" x 1.4" Operating Temperature: -25 degrees C to 55 degrees C Operating Voltage: 10-32VDC Power Draw (W): 2 Vessel Size: Under 12 meters

Double Stacked Masthead Light - 3NM - Black Housing with FB Base This black masthead light is double stacked, horizontally mounted, and has a three-nautical-mile range. The FB base centers the wiring for antenna-type pole mountings. The base provides a screw-down onto the deck solution as well as a from-below mounting. Essentially, the base provides a sleeker, reduced profile.  Features: Black anodized aluminum housing 0.75m cable is included Specifications: Approved To: COLREG72,EN14744,IEC 60945,IACS E10,USCG,ABS,M.E.D.,DNV,LR Mounting: Horizontal EAN: 5704438043435 Min. Feed Wire Gauge: 0.5mm2 AWG22 Light Color: White Visibility: 3NM Included In the Package: 1 Navigation light, pre-cabled with 0.75 meter shielded marine grade cable and installation guide Materials: Black anodized aluminum 25µ, PMMA lens, A4 stainless steel screws, Epoxy, Polyurethane IP rating: IP68   Connection: 0.75m cable Current Consumption (mA @ 24VDC): 127 Current Consumption (mA @ 12VDC): 232 Dimensions Metric: Ø92.5mm x 58mm Dimensions Imperial: Ø3.6" x 2.3" Operating Temperature: -25 degrees C to 55 degrees C Operating Voltage: 10-32VDC Power Draw (W): 3 Vessel Size: 12-20 meters

360-Degree Anchor Light - 2NM - Black Housing with FB Base This black 360-degree anchor light is horizontally mounted and has a two-nautical-mile range. The FB base centers the wiring for antenna-type pole mountings. The base provides a screw-down onto the deck solution as well as a from-below mounting. Essentially, the base provides a sleeker, reduced profile.  Features: Black anodized aluminum housing 0.75m cable is included Specifications: Approved To: COLREG72,EN14744,IEC 60945,IACS E10,USCG,ABS,M.E.D.,DNV,LR Mounting: Horizontal EAN: 5704438042797 Min. Feed Wire Gauge: 0.5mm2 AWG22 Light Color: White  Visibility: 2NM Included In the Package: 1 Navigation light, pre-cabled with 0.75 meter shielded marine grade cable and installation guide Materials: Black anodized aluminum 25µ, PMMA lens, A4 stainless steel screws, Epoxy, Polyurethane IP rating: IP68   Connection: 0.75m cable Current Consumption (mA @ 24VDC): 110 Current Consumption (mA @ 12VDC): 167 Dimensions Metric: Ø92.5mm x 36mm Dimensions Imperial: Ø3.6" x 1.4" Operating Temperature: -25 degrees C to 55 degrees C Operating Voltage: 10-32VDC Power Draw (W): 2 Vessel Size: Under 12 meters, 12-20 meters, and 20-50 meters

360-Degree Double Stacked Anchor Light - 2NM - Black Housing with FB Base This black 360-degree anchor light is double-stacked, horizontally mounted, and has a two-nautical-mile range. The FB base centers the wiring for antenna-type pole mountings. The base provides a screw-down onto the deck solution as well as a from-below mounting. Essentially, the base provides a sleeker, reduced profile.  Features: Black anodized aluminum housing 0.75m cable is included Specifications: Approved To: COLREG72,EN14744,IEC 60945,IACS E10,USCG,ABS,M.E.D.,DNV,LR Mounting: Horizontal EAN: 5704438042957 Min. Feed Wire Gauge: 0.5mm2 AWG22 Light Color: White  Visibility: 2NM Included In the Package: 1 Navigation light, pre-cabled with 0.75 meter shielded marine grade cable and installation guide Materials: Black anodized aluminum 25µ, PMMA lens, A4 stainless steel screws, Epoxy, Polyurethane IP rating: IP68   Connection: 0.75m cable Current Consumption (mA @ 24VDC): 110 Current Consumption (mA @ 12VDC): 167 Dimensions Metric: Ø92.5mm x 58mm Dimensions Imperial: Ø3.6" x 2.3" Operating Temperature: -25 degrees C to 55 degrees C Operating Voltage: 10-32VDC Power Draw (W): 2.6 Vessel Size: Under 12 meters, 12-20 meters, and 20-50 meters

360-Degree Anchor Light with Strobe - 2NM - Black Housing with FB Base This black 360-degree anchor light has a white strobe light, is horizontally mounted, and has a two-nautical-mile range. The FB base centers the wiring for antenna-type pole mountings. The base provides a screw-down onto the deck solution as well as a from-below mounting. Essentially, the base provides a sleeker, reduced profile.  Features: Black anodized aluminum housing 0.75m cable is included Specifications: Approved To: COLREG72,EN14744,IEC 60945,IACS E10,USCG,ABS,M.E.D.,DNV,LR Mounting: Horizontal EAN: 5704438042926 Min. Feed Wire Gauge: 0.5mm2 AWG22 Light Color: White  Visibility: 2NM Included In the Package: 1 Navigation light, pre-cabled with 0.75 meter shielded marine grade cable and installation guide Materials: Black anodized aluminum 25µ, PMMA lens, A4 stainless steel screws, Epoxy, Polyurethane IP rating: IP68   Connection: 0.75m cable Current Consumption (mA @ 24VDC): 110 Current Consumption (mA @ 12VDC): 167 Dimensions Metric: Ø92.5mm x 36mm Dimensions Imperial: Ø3.6" x 1.4" Operating Temperature: -25 degrees C to 55 degrees C Operating Voltage: 10-32VDC Power Draw (W): 2.6 Vessel Size: Under 12 meters, 12-20 meters, and 20-50 meters

Yellow Towing Light - 2NM - Black Housing with FB Base This yellow towing light has a black housing, is designed to be horizontally mounted, and has a two-nautical-mile range. The FB base centers the wiring for antenna-type pole mountings. The base provides a screw-down onto the deck solution as well as a from-below mounting. Essentially, the base provides a sleeker, reduced profile.  Features: Black anodized aluminum housing 2.5m cable is included Specifications: Approved To: COLREG72,EN14744,IEC 60945,IACS E10,USCG,ABS,M.E.D.,DNV,LR Mounting: Horizontal EAN: 5704438043473 Min. Feed Wire Gauge: 0.5mm2 AWG22 Light Color: Yellow Visibility: 2NM Included In the Package: 1 Navigation light, pre-cabled with 2.5 meters shielded marine grade cable and installation guide Materials: Black anodized aluminum 25µ, PMMA lens, A4 stainless steel screws, Epoxy, Polyurethane IP rating: IP68   Connection: 2.5m cable Current Consumption (mA @ 24VDC): 71 Current Consumption (mA @ 12VDC): 124 Dimensions Metric: Ø92.5mm x 36mm Dimensions Imperial: Ø3.6" x 1.4" Operating Temperature: -25 degrees C to 55 degrees C Operating Voltage: 10-32VDC Power Draw (W): 1.7 Vessel Size: 20-50 meters

Double Stacked Yellow Towing Light - 2NM - Black Housing with FB Base This double-stacked yellow towing light has a black housing, is designed to be horizontally mounted, and has a two-nautical-mile range. The FB base centers the wiring for antenna-type pole mountings. The base provides a screw-down onto the deck solution as well as a from-below mounting. Essentially, the base provides a sleeker, reduced profile.  Features: Black anodized aluminum housing 2.5m cable is included Specifications: Approved To: COLREG72,EN14744,IEC 60945,IACS E10,USCG,ABS,M.E.D.,DNV,LR Mounting: Horizontal EAN: 5704438043497 Min. Feed Wire Gauge: 0.5mm2 AWG22 Light Color: Yellow Visibility: 2NM Included In the Package: 1 Navigation light, pre-cabled with 2.5 meters shielded marine grade cable and installation guide Materials: Black anodized aluminum 25µ, PMMA lens, A4 stainless steel screws, Epoxy, Polyurethane IP rating: IP68   Connection: 2.5m cable Current Consumption (mA @ 24VDC): 71 Current Consumption (mA @ 12VDC): 124 Dimensions Metric: Ø92.5mm x 58mm Dimensions Imperial: Ø3.6" x 2.3" Operating Temperature: -25 degrees C to 55 degrees C Operating Voltage: 10-32VDC Power Draw (W): 1.7 Vessel Size: 20-50 meters

360-Degree Red Nav Light - 2NM - Black Housing with FB Base This red 360-degree navigation light has a black housing, is horizontally mounted, and has a two-nautical-mile range. The FB base centers the wiring for antenna-type pole mountings. The base provides a screw-down onto the deck solution as well as a from-below mounting. Essentially, the base provides a sleeker, reduced profile.  Features: Black anodized aluminum housing 0.75m cable is included Specifications: Approved To: COLREG72,EN14744,IEC 60945,IACS E10,USCG,ABS,M.E.D.,DNV,LR Mounting: Horizontal EAN: 5704438043015 Min. Feed Wire Gauge: 0.5mm2 AWG22 Light Color: Red  Visibility: 2NM Included In the Package: 1 Navigation light, pre-cabled with 0.75 meter shielded marine grade cable and installation guide Materials: Black anodized aluminum 25µ, PMMA lens, A4 stainless steel screws, Epoxy, Polyurethane IP rating: IP68   Connection: 0.75m cable Current Consumption (mA @ 24VDC): 85 Current Consumption (mA @ 12VDC): 150 Dimensions Metric: Ø92.5mm x 36mm Dimensions Imperial: Ø3.6" x 1.4" Operating Temperature: -25 degrees C to 55 degrees C Operating Voltage: 10-32VDC Power Draw (W): 2.1 Vessel Size: Under 12 meters, 12-20 meters, and 20-50 meters