Class T Replacement Fuse - 200 Amp 200-amp replacement fuse for Samlex CFB2-400 fuse block assembly. Features: Individual 200-amp replacement fuse Applications: Inverter Accessories Specifications: Amps: 200 amps  Fuse: 200 A  Weight: 0.2 (lbs.) Weight: 0.09 (kg) Dimensions: 3 x 1.25 x 1.25 (in.) Dimensions: 7.6 x 3.2 x 3.2 (cm)

Class T Replacement Fuse - 400 Amp 400-amp replacement fuse for Samlex CFB2-400 fuse block assembly. Features: Individual 400-amp replacement fuse Applications: Inverter Accessories Specifications: Amps: 400 amps  Fuse: 400 A  Weight: 0.2 (lbs.) Weight: 0.09 (kg) Dimensions: 3 x 1.25 x 1.25 (in.) Dimensions: 7.6 x 3.2 x 3.2 (cm)

400A Class T Replacement Fuse Specifications: Individual Fuse Amps: 400A Fuse: 400A Weight: 0.2 (lbs) Weight: 0.09 (kg) Dimensions: 3 x 1.25 x 1.25 (in) Dimensions: 7.6 x 3.2 x 3.2 (cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

200A Fuse Assembly Samlex fuse assemblies and replacement fuses. Features: Individual Fuse Includes single pole fuse bar, fuse insulating cap and hardware Specifications: Amps: 200 Amps Fuse: 200 Amps Weight: 0.2 (lbs) Weight: 0.09 (kg) Warranty: 2 Year Limited Applications: Inverter Accessories WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

200A Inverter Installation Kit f/2000W Inverter Samlex’s Inverter Installation Kit contains a pair of heavy duty cables and a fuse assembly that is used to connect the inverter to the battery bank. The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection. Specifications: Input: 1000-1700 Watts / 2000-3400 Watts Output: 12 V / 24 V Amps: 200 Amps Fuse: 200 Amps Weight: 6.2 (lbs) Weight: 2.81 (kg) Dimensions: *comes with 10ft of cable x 2 Warranty: 2 Year Limited Applications: The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

400A Class T Fuse Block Accessory Kit Specifications: Amps: 400 Amps Fuse: 400 Amps Weight: 1 (lbs) Weight: 0.45 (kg) Dimensions: 7 x 2 x 2.25 (in) Dimensions: 17.8 x 5.1 x 5.7 (cm) Applications: Inverter Accessories WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MIDI Flex Series - 32V Bolt Down Fuse Holder for Fuses Up To 200 Amps Thanks to its flexible cover, the MIDI Flex Series 32V Bolt-Down Fuse Holder makes it simple to install up to a 200A MIDI fuse. Its exterior features 6 positions for cable entry and accommodates large wire sizes and ring terminal stack-up. This bolt-down fuse holder has a dovetail side feature that lets you connect multiple MIDI Flex Series fuse holders. Busbars for multi-fuse applications are available (sold separately), so you can create a fused automotive power distribution block. MIDI Flex Series fuse holders can also be combined with MEGA Flex Series fuse holders (sold separately) for a high and low-amperage solution. Features: Carded blister packaging for simple retail display Compatible with MIDI bolt-down fuses up to 200A (sold separately) The flexible cover allows cable entry at 6 different locations, simplifying installation and accommodating large wire sizes and ring terminal stack up The dovetail feature lets you connect multiple Flex Series fuse holders together to create a fused power distribution block Slots molded into the base enable secure tie-wrap mounting Zinc-plated steel M5 studs and hex nuts Bolt-down fuse holder base features M4 mounting holes UL 94 V-0 flammability rating Applications: Battery and alternator Connections *Fuses not included

Fuse Block Class T 225-400 AMP Part #: 5502 Features: Maximum Voltage: 160 Volts DC Maximum Amperage: 400 Amperes DC Maximum Torque: 190 in-lb (21.47 Nm) max. Terminal Stud Size: 3/8"-16 (M10) Mounting Holes: Accept 1/4" (M6) Screw Maximum Cable Size 4/0 AWG Fuse Mounting Blocks: Tin-Plated Copper Class T Fuses Available: 110-400 Amperes DC  Fuse Sold Sepereatly WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Class T Fuse Holder with 2 Additional Studs 225-400A Providing high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load. Radiused ends improve cable routing options Class-T: 225-400 Amp WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Class T Fuse Holder with 2 Additional Studs 450-600A Providing high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load. Radiused ends improve cable routing options Class-T: 450-600 Amp WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Class T Fuse Block with Insulating Cover - 225 to 400A Allows the use of Class T fuses for fast acting circuit protection of inverters and other electronics Four stud design provides ample access around connecting stud to install large cable lugs without obstruction from the fuse Insulating cover satisfies ABYC/USCG insulation requirements Cover breakouts allow wire access in any direction Stud design ensures secure fuse mounting even with high heat Stainless steel studs provide resistance to corrosion and high torque One-piece stainless flange nuts ensure safe and secure connections UL 94-V0 base resists high heat Technical Specifications: Cable Size: Up to 4/0 AWG Ignition Protected: Yes Maximum Amperage: 320A Maximum Voltage: 160V DC Fuse Mounting Blocks: Tin-Plated Copper Terminal Stud Size: 5/16"-18 (M8) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

V12-CBF200 Circuit Breaker - 200 AMP Getting tired of replacing your power fuse every time you show off how loud your system can play?  You should consider replacing the fuse holder with a circuit breaker.  T-Spec's competition-grade circuit breaker protects your wiring and battery with reliable, fast-acting, spring-loaded disconnection when sensing a short circuit or over-current condition. This breaker accepts 1/0- to 4-gauge wire and features 24-karat gold-plated conductors for corrosion-free connections.  You'll need Allen head wrenches to install this circuit breaker. Features: 1/0 or 4 AWG In/Out  Manual reset button  24K hard gold plated Resistant to corrosion  In the Box: 200A Circuit breaker with 1/0 AWG or 4 AWG input and output Instruction sheet *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MIDI 498 Series - 32V Bolt Down Fuse Holder for Fuses Up To 200 Amps Thanks to interlocking pins on its sides, the MIDI 498 Series 32V Bolt-Down High-Current Fuse Holder can be used as a single automotive fuse holder or combined with additional fuse holders to create a multi-fuse block. Compatible with MIDI bolt-down fuses (sold separately) up to 200 amps, the high-amp fuse holder comes with a protective thermoplastic cover that can be tethered to the base. This model of the MIDI 498 Series fuse holder (04980903-BP) includes a base with mounting tabs and M6 holes and a protective cover with cable openings at the ends. Split washers and hex nuts are included to install a fuse on the M5 threaded studs simply. Features: Blister packaging promotes the easy retail display Base style 2 with mounting brackets and M6 holes is designed for outboard mounting M5 threaded studs, split washers, and hex nuts for simple fuse installation Protective cover openings at the ends accommodate heavy-duty cables Applications: High-Current Circuit Protection *Fuses not included

Class T Fuse Block with Insulating Cover - 110 to 200A Allows the use of Class T fuses for fast acting circuit protection of inverters and other electronics Four stud design provides ample access around connecting stud to install large cable lugs without obstruction from the fuse Insulating cover satisfies ABYC/USCG insulation requirements Cover breakouts allow wire access in any direction Stud design ensures secure fuse mounting even with high heat Stainless steel studs provide resistance to corrosion and high torque One-piece stainless flange nuts ensure safe and secure connections UL 94-V0 base resists high heat Specifications: Cable Size: Up to 4/0 AWG Ignition Protected: Yes Maximum Amperage: 200A Maximum Voltage: 160V DC Fuse Mounting Block: Tin-Plated Copper Terminal Stud Size: 5/16"-18 (M8) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

V8 Series 200 AMP ANL Fuse - 2 Pack T-Spec high-current fuse protects your equipment and you in the event of an electrical short circuit.  Each of these heavy-duty fuses features a little window through which you can visually check the fuse's status. Features: Nickel plated Status window *Sold as a 2 Pack WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.