12V Deluxe Power Socket with Cap The deluxe flush-mount power socket with a plug adds power virtually anywhere. Installation is as easy as drilling a 1-1/8 in. hole, inserting the socket body, tightening the locking nut, and connecting the wires. Features: The plug features a 3-amp fuse and an LED light to indicate when it is powered Constructed of injection-molded nylon and ABS sockets with stamped brass plug contacts Specifications: Maximum: 12VDC, 16A Diameter: 1-7/16 in. Height: 1-1/16 in. Length: 1-9/16 in. Weight: 0.04 lb.

Dual USB Power Socket  This USB power socket charges two devices simultaneously. Input 12V–24V. Total output DC 5V/4.8A with the load being split between the two sides as needed. Enough power to charge iPhones, iPads and most other devices. Blue LED illumination. Protective dust cap extends the life of the charger. Fits Sea-Dog® Line standard 1-1/8” Power Socket Shell 426100. IP65 rating. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Double USB & Power Socket Panel with Breaker Switch  This injection molded nylon power socket panel accommodates both USB connectors as well as standard power sockets. The dual USB power socket charges two devices simultaneously. Input 12V–24V. Single output DC 5V/2.4A. Total output is 4.8A with the load being split between the two sides as needed. Enough power to charge iPhones, iPads and most other devices. The power socket is rated at a maximum of 12V/16A. Protective dust caps extend the life of the charger. Includes mounting screws and electrical connectors. Includes 16A breaker switch. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Double USB & Power Socket Panel  This injection molded nylon power socket panel accommodates both USB connectors as well as standard power sockets. The dual USB power socket charges two devices simultaneously. Input 12V–24VDC. Single output DC 5V/2.4A. Total output is 4.8A with the load being split between the two sides as needed. Enough power to charge iPhones, iPads and most other devices. The power socket is rated at a maximum of 12V/16A. Protective dust caps extend the life of the charger. Includes mounting screws and electrical connectors. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Dual USB Power Plug with Voltage/Amp Meter  LCD screen displays charging status in amps, battery voltage, and low voltage audio alarm. Stamped stainless steel and injection molded nylon construction this USB power plug adapter charges two devices simultaneously. Input 12-24V, Single output DC 5V/2.4A. Total output is a 4.8A with the load being split between the two sides as needed. Enough power to charge iPhones, iPads and most other devices. Can be used on a boat, car, or RV. This portable version fits all Sea-Dog® Power Sockets and any standard 12V receptacle. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2" Gauge Power Socket Adapter Mounting Plate   This instrument hole adapter is designed to install standard 1-1/8-in. gauges and meters into 2 in. instrument dash panel holes. The socket adapter is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind. Features: Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look Constructed of UV-resistant injection-molded nylon Specifications: Face Plate Outer diameter: 2-3/16 in. Face Plate Inner Diameter: 1-3/16 in. Face Plate Thickness: 3/16 in. Height: 2 in. Washer Inner Diameter: 1-1/16 in. Washer Thickness: 1/8 in. Weight: 0.04

4" Gauge Power Socket Adapter Mounting Plate This instrument hole adapter allows you to replace an unused 4 in. gauge with two new 1-1/8 in. style gauges. It is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind.  Features: Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look Constructed of UV-resistant injection-molded nylon Specifications: Color: Black Face Plate Outer diameter: 3-3/4 in. Face Plate Inner Diameter: 1-3/16 in. Face Plate Thickness: 3/16 in. Height: 3-3/8 in. Washer Inner Diameter: 1-1/16 in. Washer Thickness: 1/8 in. Weight: 0.06

4" Gauge Power Socket Adapter Mounting Plate - White This instrument hole adapter allows you to replace an unused 4 in. gauge with two new 1-1/8 in. style gauges. It is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind.  Features: Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look Constructed of UV-resistant injection-molded nylon Specifications: Color: White Face Plate Outer diameter: 3-3/4 in. Face Plate Inner Diameter: 1-3/16 in. Face Plate Thickness: 3/16 in. Height: 3-3/8 in. Washer Inner Diameter: 1-1/16 in. Washer Thickness: 1/8 in. Weight: 0.06

Front Mount Power Socket This SAE-type polarized electrical connector is a two-prong power socket connector set. Great for solar panel connections and maintaining battery charge. Drill a 3/4” hole and install with two #10 RH screws (not included). Features: 14-gauge duplex wire Specifications: Length: 5 in. Volts: 12-24 Maximum Amps: 20A @ 12VDC Wire Guage: 14 AWM Weight: 0.12 lb.

12V Power Socket & Cap Stamped Brass/Injection Molded Nylon & ABS.  Power Socket with Plug easily adds 12V power almost anywhere. Constructed of injection molded nylon and ABS socket with stamped brass plug contacts. Installs with two #8 FH fasteners (not included). Maximum: 12VDC, 16A. Cap and plug may be included or sold separately. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Round USB & USB-C Power Socket with Hidden Voltmeter USB 3.0 & USB-C Power Socket with Voltmeter charges two devices simultaneously while the LED screen displays voltage status. The total output 6A load is split 3A per side as needed. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. A protective dust cap extends the life of the charger.  Features:  LED volt meter reads voltage up to 14.6 volts  Includes an On/Off button to conserve battery power when not in use  Constructed of injection molded nylon  Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires  Also, fits Sea-Dog® Power Socket Shell (426100) and Mounting Bracket (426105) Blue LED display  IP65 rating & RoHS compliant. Specifications: Output DC: 5V/6A Input: 8-32VDC USB-C Watts: 60W@24V  USB Watts: 36W@12V Plug-In Side Diameter: (inch) 1-7/16" Length: (inch) 1-1/2" *Sold as an Individual

12V Chrome Steel Power Socket The power socket with the plate is ideal for installing additional power outlets. Features: Constructed of chrome steel sockets with a stamped 304 stainless steel mounting plate Installs with two #8 RH fasteners (not included) Specifications: Maximum: 12VDC, 16A. Socket Material: Chrome steel socket and molded cap   Distance Between Mounting Holes: 1-11/16 in. Height (not including the plate): 1-1/8 in. Fastener: #8 RH Weight: 0.12 lb.

12V Stainless Steel Power Socket The power socket with the plate is ideal for installing additional power outlets.  Features: Constructed of stainless steel sockets with a stamped 304 stainless steel mounting plate Installs with two #8 RH fasteners (not included) Specifications: Maximum: 12VDC, 16A.     Socket Material: Stainless steel socket and molded cap  Distance Between Mounting Holes: 1-11/16 in. Height (not including the plate): 1-1/8 in. Fastener: #8 RH     Weight: .12 lb.

USB 3.0 & USB-C Power Socket without Light This USB 3.0 & USB-C power socket charges two devices simultaneously. When split, the total 6A output is 3A per side. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. Features: A protective dust cap covers the ports when not in use Constructed of injection-molded nylon Easy installation requires drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires USB 3.0 Watts: Non-illuminated IP65 rating CE and RoHS compliant Specifications: Outer Diameter (inch): 1-7/16" Inner Diameter (inch): 1-1/8" Length (inch): 1-1/2 Volts: 8-32 Total Output: 5V/6A USCB-C Watts: 60W @ 24V USB-A Watts: 36W @ 12V Weight: 0.08 lb. Color: Black

12V Power Socket with Blue LEDs The LED power socket adds power easily, almost anywhere. Two blue LEDs light up the interior.  Features: Constructed of injection-molded nylon and ABS with stamped brass contacts Installation is as easy as drilling a 1-1/8 in. hole, inserting the socket body, tightening the locking nut, and connecting the wires Also fits the Sea-Dog Power Socket Shell (426100) and Mounting Bracket (426105) IP65 rating Specifications: Input: 12-24VDC. 16A. Diameter: 1-7/16 in. Length: 1-9/16 in. Height: 1-1/16 in. Volts: 12-24 LEDs: 2  LED Color: Blue   Weight: 0.08 lb.