|
Tortuga Dimmer - 12/24V
The Tortuga Dimmer is designed to easily adjust the interior or exterior light level from 0-100% output. Touch the "up" button to turn the light on, and touch the "down" button to turn the light off.
Press and hold either up or down on the included switch to increase or decrease the light output level to your liking. Release it at any point to maintain the current brightness.
If users are leaving the boat, the Tortuga features an exit mode. Push the "down" button two times within 1.5 seconds, and the light will flash twice and turn off after 1 minute.
Features:
The Tortuga is pulse width modulated, so it will work with LED, incandescent, or halogen lights
It is also rated for 12V or 24V
Die-cast aluminum housing
IP66
10-30VDC
Rated for 8A
Includes switch
*The "P" within the part number indicates retail packaging
|
54.07 |
|
|
Headhunter XRS-124 X-CAL 12/24V Pump
X-Caliber – 12-24V DC Water Pressure Pump
Quiet, reliable, blasting water pressure. Combining advanced DC motor and control technology with a proven self-priming centrifugal pump, the X-caliber surges past the competition with a flood of features.
A built in microprocessor interfaced with a rugged ceramic temperature and pressure sensor provides variable speed operation, prevents dry running damage and ensures complete electrical protection.
Part#Description
XRS-124X-Caliber 12-24 VDC Saltwater Pressure System
Control Panel:
Program power and pressure settings via the integrated control panel. Four colored LED’s display current settings and alarm conditions.
Advanced Features:
Adjustable cut in pressure
Adjustable power setting
Operates on 12 or 24VDC
Over voltage protection
Under voltage protection
Over current protection
Anti-flooding protection
Dry run protection
Variable Speed
Rotating bracket
Product Details/Specifications:
Liquid Temp
32°F (0°c)-104°F (40°c)
Ambient Temp
32°F (0°c)-122°F (50°c)
Max Pressure 67 PSI (4.5 bar)
Max Flow 10 GPM (38 lpm)
Suction/Discharge 3/4” FPT (Optional metric adapter)
Weight 16lbs (7.2 kg)
Dimensions 15”(382mm)L 8”(203mm)W 7”(178mm)H
|
2422.73 |
|
|
DeckHand Dimmer - 12 Amp/24V
Features:
Illuminated exit with adjustable time delay
Digitally controls dimming of non-regulated LEDs, incandescent, and halogen lights
Memory for last setting
Provides continuous voltage control from 0 to 100% of input voltage
Offset mounting tabs allow dimmers to be mounted close together
Retail package includes momentary (ON)-OFF-(ON) switch
Specifications:
Nominal Voltage: 12 Volts DC
Temperature Rating: -40 degrees C to 85 degrees C
Maximum Parasitic Current: 2mA
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
81.95 |
|
|
B3 Downlight Surface Mount - Cool White - SS Trim - IP67 - 12/24V
Scandvik’s low profile B3 (3/8 in. height) surface-mounted, single-color downlight is manufactured to be simple and budget-friendly. The polished stainless steel snap-over trim ring is a nice upgrade from the inferior chrome plastic bezels of the past. The fixture is popular as a T-Top light because it looks like a flush-mount light without the hassle of cutting holes.
Features:
The light color is cool white
95 Lumens
10-30 VDC
1 Watt
IP67
*The "P" within the part number indicates retail packaging
|
17.82 |
|
|
B3 Downlight Surface Mount - Blue - SS Trim - IP67 - 12/24V
Scandvik’s low profile B3 (3/8 in. height) surface-mounted, single-color downlight is manufactured to be simple and budget-friendly. The polished stainless steel snap-over trim ring is a nice upgrade from the inferior chrome plastic bezels of the past. The fixture is popular as a T-Top light because it looks like a flush-mount light without the hassle of cutting holes.
Features:
The light color is blue
13 Lumens
10-30 VDC
1 Watt
IP67
*The "P" within the part number indicates retail packaging
|
17.82 |
|
|
7" Oval Dome Light with Switch & Dimming - 12/24V
The LED technology used in this light provides a uniform output and eliminates hot spots common among LEDs. A touch-sensitive switch provides three-stage dimming. The brightest, mid-level, and low settings easily adjust with a touch of the on/off button. The on/off button illuminates blue to help locate it in the dark.
Features:
12/24V
42 x 0.5-watt 2835 LEDs
Natural White (4250K)
680 Effective Lumens
Plastic housing with a high-impact plastic lens
Surface mount, 3 stainless steel screws Included
IP67
*The "P" within the part number indicates retail packaging
|
60.46 |
|
|
DeckHand Dimmer - 12 Amp/12V
Works with all incandescent and non-regulated LED lamps
Memory for last setting
Illuminated exit with adjustable time delay
Provides continuous voltage control from 0 to 100% of input voltage
Offset mounting tabs allow dimmers to be mounted close together
Retail package includes momentary (ON)-OFF-(ON) switch
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
71.58 |
|
|
Adjustable Linear LED Light with Built-In Dimmer - 12" Length, 12VDC, Warm White with Switch
These sleek Light Bars are compact and put out the light. >80 CRI LED.
Features:
Only 9.5mm Thick!
Built-in Touch Switch and Easy Mounting
High CRI Light for beautiful surroundings
|
42.14 |
|
|
3133 - SMS Panel Enclosure with Main & 3 Branch (12/24V) - 12/24V DC
The 3133-panel enclosure for DC circuit breakers and other large frame devices.
Features:
Blank apertures for custom breaker loading
Glass-filled polycarbonate base
Clear cover allows easy view of circuit breaker status
Overlapping cover for strength and increased gasket protection
Oversized, formed in place seamless PUR gasket
Easily removable stainless steel hinge pin for unobstructed installation
Stainless steel latch secures cover without penetrating the enclosure
Blank circuit positions accommodate Carling Technologies™ A and C Series Flat Rocker and ELCI Main circuit breakers
Includes waterproof glands
LED lights for backlighting and ON indication
Technical Specifications:
Circuit Breaker Type - 1 x 12/24V DC Main and 3 x Branch 12/24V DC (15A)
Dimensions (Overall) (H x W x D) - 7.6" x 7.4"" x 4.7" (192 x 188 x 120mm)
Dimensions (Enclosure) (H x W x D) - 6" x 6" x 4" (152 x 152 x 102mm)
LEDs Installed - 6 x Amber ON indicating 12/24V DC
In the Box:
3133 Enclosure
Glands x 6
Labels
Mounting hardware
Instruction manual
*Sold as an Individual
|
301.14 |
|
|
3134 - SMS Panel Enclosure with 4 Branch (12/24V) - 12/24V DC
The 3134-panel enclosure for DC circuit breakers and other large frame devices.
Features:
Blank apertures for custom breaker loading
Glass-filled polycarbonate base
Clear cover allows easy view of circuit breaker status
Overlapping cover for strength and increased gasket protection
Oversized, formed in place seamless PUR gasket
Easily removable stainless steel hinge pin for unobstructed installation
Stainless steel latch secures cover without penetrating the enclosure
Blank circuit positions accommodate Carling Technologies™ A and C Series Flat Rocker and ELCI Main circuit breakers
Includes waterproof glands
LED lights for backlighting and ON indication
Technical Specifications:
Circuit Breaker Type - 4 x Branch 12/24V DC (15A)
Dimensions (Overall) (H x W x D) - 7.6" x 7.4"" x 4.7" (192 x 188 x 120mm)
Dimensions (Enclosure) (H x W x D) - 6" x 6" x 4" (152 x 152 x 102mm)
LEDs Installed - 6 x Amber ON indicating 12/24V DC
In the Box:
3134 Enclosure
Glands x 6
Labels
Mounting hardware
Instruction manual
*Sold as an Individual
|
289.54 |
|
|
3135 - SMS Panel Enclosure with UL Main & 3 Branch (12/24V) - 12/24V DC
The 3135-panel enclosure for DC circuit breakers and other large frame devices.
Features:
Blank apertures for custom breaker loading
Glass-filled polycarbonate base
Clear cover allows easy view of circuit breaker status
Overlapping cover for strength and increased gasket protection
Oversized, formed in place seamless PUR gasket
Easily removable stainless steel hinge pin for unobstructed installation
Stainless steel latch secures cover without penetrating the enclosure
Blank circuit positions accommodate Carling Technologies™ A and C Series Flat Rocker and ELCI Main circuit breakers
Includes waterproof glands
LED lights for backlighting and ON indication
Technical Specifications:
Circuit Breaker Type - 1 x UL 489 DC Main and 3 x Branch 12/24V DC (15A)
Dimensions (Overall) (H x W x D) - 7.6" x 7.4"" x 4.7" (192 x 188 x 120mm)
Dimensions (Enclosure) (H x W x D) - 6" x 6" x 4" (152 x 152 x 102mm)
LEDs Installed - 6 x Amber ON indicating 12/24V DC
In the Box:
3135 Enclosure
Glands x 6
Labels
Mounting hardware
Instruction manual
*Sold as an Individual
|
323.18 |
|
|
Digital Duo Charge - 12/24V
The Digital Duo Charge (DDC-12/24) provides a “hands off” solution for charging two battery banks without the use of problematic isolators or manual battery switches. During charging the DDC-12/24 monitors voltage at the house battery. When voltage exceeds the set minimum (typically 13.2V in a 12V system and 26.4V in a 24V system) the DDC-12/24 automatically engages, providing up to 30A charge current to the starting battery. When no charge source is present, the DDC-12/24 separates the batteries so the starting battery won’t be accidentally discharged into the house battery. An optional solenoid control enables higher start battery charging output when required.
Features:
Multi Bank Charging
The DDC is a Solid-State Battery Combiner
Control Voltage and Current between House and Start Batteries
Eliminates the Need for an Isolator, Relay or Manually Operated Battery Switch
Used in Concert with Max Charge or ARS-5 Regulators
Can also be Employed without a Balmar Regulator
Works in Both 12V and 24V Applications
House and Start Batteries can be different technologies
Start Battery Temperature Sensing Available with the MC-TS-B Sensor Cable
4 Battery Programs Supported for the Start Battery:
Standard Flooded, Deep Cycle Flooded, AGM and Gel Cell
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
226.84 |
|
|
Fresh Water Level Sensor with Sealing Kit #370 - 12-24V - 4-20mA - 80-600mm Length
Fresh Water Level Sensor (capacitive) with adjustable dip, sealing kit.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
145.09 |
|
|
BattMan Lite Battery Monitor - 12/24V
Battery monitor, 12/24 V DC with large, splash-proof display (IP65) and power bar.
An affordable battery monitor that does exactly that: providing critical information about the status of your battery bank under all circumstances. Moreover, it will warn you when your battery bank is empty.
General Specifications:
Number of battery outlets: 2; service (fully), starter (voltage)
Display/read-out: Voltage, current, amp-hours, battery capacity in %
Languages on display: Universal
Built-in depth: 72.5 mm/2.9 inch
Dimensions: Ø 64 mm, depth 79 mm
Dimensions shunt, hxwxd: 87 x 45 x 35 mm/3.4 x 1.8 x 1.4 inch
Weight: 0.15 kg/0.3 lb
Technical Specifications:
Max. Ah capacity: 9999 Ah
Supply voltage: 9-35 V
Voltage range: 0-35 V
Current consumption (backlight off): 8 mA/12 V, 6 mA/24 V
Current consumption (backlight on): 30 mA/12 V, 18 mA/24 V
Voltage resolution: 0.1 V
Voltage accuracy: ± 0.3%
Shunt specification: 500 A/50 mV (service set)
Current measurement range: 0-500 A
Current accuracy: ± 0,4 %
Battery alarm contact: Yes, potential free
Remaining time indication: No
Historical data: No
MasterBus compatible: No
Connection cable (6-wire) necessary: Yes
Modular cable necessary: No
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
213.72 |
|
|
8121 - 5 Position Contura Switch Panel with Dual USB Chargers - 12/24V DC - Black
Designed for open-cockpit and flybridge applications using switches to complement existing controls commonly used on many boats.
Features:
Includes 12/24V DC, 4.8A Dual USB chargers with intelligent device recognition that maximizes charge rate
Designed for 12 or 24V DC systems
Watertight mounting gasket
ON indicating LEDs embedded in all switches
Technical Specifications:
Nominal Voltage - 12/24V DC
Operating Current - 18mA per switch
Switch Rating - 20A@12V and 15A@24V DC
USB - 12/24V Dual USB Charger 4.8A
Dimensions (H x W x D) - 7.5" x 5.25" x 3" (190.5 x 133.35 x 76.2mm)
In the Box:
8121 Panel
Labels
Mounting hardware
*Sold as Individual
|
174.47 |
|