|
E500 Engine Room Light - 10-30V - Cool White
The E-500 is a multi-voltage (12/24V), surface-mounted engine room light that offers an impact-resistant PC lens, which allows the wires to exit straight back through the mounting surface or routed to the side through the end cap. Featuring a total of 50 LEDs, this fixture produces an impressive 1,520 lumens, comparable to a 220W standard bulb. Drawing only 1.5 amps (12V), this fixture is often used in multiple quantities to eliminate any dark spots in the engine room.
Features:
12/24 Volt, 18 Watt
Surface Mount (hardware included)
Specifications:
LED Quantity: 50 (5 rows of 10 LEDs)
Lumens: 1,520
Protection: IP65
LED Type: SMD5630 cool white (5,500K-6,300K)
Beam Angle: 180°
*The "P" within the part number indicates retail packaging
|
83.83 |
|
|
E360 Engine Room Light - 12V - Cool White
The E-3600 is a surface-mounted engine room light. The impact-resistant PC lens allows the wires to exit straight back through the mounting surface or be routed to the side through the end cap. Featuring a total of 36 LEDs, this fixture produces 1,154 lumens, comparable to a 160-watt standard bulb. Drawing a mere 1.1 Amps at 12V, this fixture is often used in multiple quantities to eliminate any dark spots in the engine room.
Features:
12 Volt, 13.2 Watt
Surface Mount (hardware included)
Specifications:
LED Quantity: 36 (4 rows of 9 LEDs)
Lumens: 1,154
Protection: IP65
LED Type: SMD5630 cool white (5,500K-6,300K)
Beam Angle: 180°
*The "P" within the part number indicates retail packaging
|
54.67 |
|
|
Flush Mount Spreader Light - 10-30V - White
This is a flush-mount spreader light with white trim.
Features:
12/24 V, 12W
High-Quality Composition Frame
Polycarbonate Lens
UV Resistant
Hidden Mounting Screws
Cool white LED color (5,500 - 6,300K)
Five 3 Watt Samsung 3535 LEDs
1,000 Lumens
Equivalent to 120-watt halogen bulbs
0.8 Amp draw at 12 volts
IP68
Specifications:
Dimensions (W x H x D): 6 x 2-1/2 H x 1-3/4 in.
Cutout (W x H): 4-1/2 x 1-1/2 in.
LED Lifetime: 50,000 Hours
LED Beam Angle: 110°
The temperature of the LED: Less than 158° with a 77° ambient temperature
*The "P" within the part number indicates retail packaging
|
61.97 |
|
|
LED Brass Reading Light - 10-30V
This is a polished brass LED cabin and reading light.
Features:
12/24V
Adjustable swivel light
On/off rocker switch
8-30 VDC, 3.1 Watt
16 SMD 2835 warm white LEDs
154 lumen
120° Beam angle
*The "P" within the part number indicates retail packaging
|
55.73 |
|
|
Ibiza LED Engine Room Light - Non-Dimming White - White Finish
As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens. Ibiza is IP67 compliant and completely sealed. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners.
Specifications:
Lumens (White): 1000
Voltage: 10-30V DC
12V DC Amps: 1.3A
24V DC Amps: 600mA
Rated Watts: 16
CCT: 5000
CRI: 70+
Op. Temp F/C :-31/35 to + 131/55 F
Timed Toggled Protocol (TTP): No
Third Party Dimmer Compatibility (3PD): Yes
Color Match Commitment (CM): Yes
Mounting Hole Diameter: N/A
Length: 2in (5.08cm)
Width: 9in (22.86)
Depth: 1in (2.54cm)
Diameter: N/A
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
127.42 |
|
|
Ibiza LED Engine Room Light - Red/White Dimming - White Finish
As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens and dual-color output, Ibiza is IP67 compliant, completely sealed and compatible with most PWM LED dimmers. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners.
Specifications:
Lumens (White): 1000
Voltage: 10-30V DC
12V DC Amps: 1.3A
24V DC Amps: 600mA
Rated Watts: 16
CCT: 5000
CRI: 70+
Op. Temp F/C :-31/35 to + 131/55 F
Timed Toggled Protocol (TTP): Yes
Third Party Dimmer Compatibility (3PD): Yes
Color Match Commitment (CM): Yes
Mounting Hole Diameter: N/A
Length: 2in (5.08cm)
Width: 9in (22.86)
Depth: 1in (2.54cm)
Diameter: N/A
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
157.06 |
|
|
Ibiza LED Engine Room Light - Blue/White Dimming - White Finish
As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens and dual-color output options, Ibiza is IP67 compliant, completely sealed and compatible with most PWM LED dimmers. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners.
Specifications:
Lumens (White): 1000
Voltage: 10-30V DC
12V DC Amps: 1.3A
24V DC Amps: 600mA
Rated Watts: 16
CCT: 5000
CRI: 70+
Op. Temp F/C: -31/35 to + 131/55 F
Timed Toggled Protocol (TTP): Yes
Third Party Dimmer Compatibility (3PD): Yes
Color Match Commitment (CM): Yes
Mounting Hole Diameter: N/A
Length: 2in (5.08cm)
Width: 9in (22.86)
Depth: 1in (2.54cm)
Diameter: N/A
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
157.06 |
|
|
Ibiza LED Engine Room Light - Non-Dimming White - Black Finish
As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens. Ibiza is IP67 compliant and completely sealed. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners.
Specifications:
Lumens (White): 1000
Voltage: 10-30V DC
12V DC Amps: 1.3A
24V DC Amps: 600mA
Rated Watts: 16
CCT: 5000
CRI: 70+
Op. Temp F/C: -31/35 to + 131/55 F
Timed Toggled Protocol (TTP): No
Third Party Dimmer Compatibility (3PD): Yes
Color Match Commitment (CM): Yes
Mounting Hole Diameter: N/A
Length: 2in (5.08cm)
Width: 9in (22.86)
Depth: 1in (2.54cm)
Diameter: N/A
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
129.49 |
|
|
Engine Room Light - Surface/Flush Mount
This super-bright, vibration-resistant LED light meets the expectations of next-generation vessels, refits, or upgrades. This multi-voltage fixture can be powered by your DC battery system, an AC generator/shore power, or both. If connected to both, the PC board automatically switches to DC power when AC power is lost.
Features:
Includes a trim ring for surface mount installation and stainless steel mounting hardware
Meets Requirements and Standards for SAE J1171 USCG, ABYC & NMMA
IP67
Flush or Surface Mount
Daylight white (6000K)
168 super-bright 2835 LEDs
12/24 VDC and/or 110/220 VAC
Specifications:
Lumens: 3400 (similar to 2 x T8 fluorescents)
Beam Angle: 120°
Watts: 42
*The "P" within the part number indicates retail packaging
|
221.75 |
|
|
Nevis - High Intensity Engine Room Light
Another high output alternative to large, boxy, unreliable fluorescents. Certified Ignition protected and small enough to mount anywhere. Wide beam angle that douses hard to light areas with a bright even light. Completely sealed, IP67 compliant and intrinsically safe.
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 900mA
24V DC Amps: 450mA
Correlated Color Temperature: 6500
Color Rendering Index: 70+
Rated Watts: 11
Lumens (White): 19
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 5.00" (12.7cm)
Height: 2.5" (6.35cm)
Depth: 0.63" (1.60cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
162.62 |
|
|
NevisLT LED Engine Room Light - 1000 Lumens
A high output LED alternative to large, boxy, unreliable fluorescents. With more than 1,000 integrating sphere tested lumens, the NevisLT douses hard to light areas with a 180 degree spread of bright even light. Ignition protected and perfect for many applications like mechanical spaces or compartments. Developed, designed, and manufactured in Florida, USA, the NevisLT delivers exceptional reliability and class-leading performance.
As with all Lumitec products, this light has been rigorously tested for shock and vibration, water ingress, impact, weatherability, electromagnetic radiation and susceptibility, and overall durability.
Specifications:
Voltage: 10-30V DC
12V DC Amps: 1.3A
2V DC Amps: 600mA
Correlated Color Temperature: 5000
Color Rendering Index: 70+
Rated Watts: 12
Lumens (White): 1000
Width: 5"
Height: 2.5"
Depth: .63"
IP67 Compliant
Certified Ignition Protected
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
120.66 |
|
|
1600 Lumen Indoor/Outdoor Engine Room Light
Excellent for lighting up small to medium size areas. Low profile design has an IP67 Rating. Hard-anodized aluminum housing with Baked Urethane finish for extreme durability. Glass lenses will not become brittle or turn yellow like plastic lenses.
Features:
Bake urethane corrosion-resistant finish
IP67 Waterproof design
Easy installation
Technical Specifications:
Lumens - 1600
Dimensions (H x W x D) - 2.9” x 5.1” x 0.59”
Voltage - 10 - 40 V
*Sold as an Individual
|
115.50 |
|
|
A-Series Rock Light Kit - 4 Cool White Lights - Black
The RIGID Rock Light Kit uses the power and durability of A-Series LED lighting and adds custom 15’ leads on each light, a distribution block, plus switch and angled mounts to light up any truck, Jeep, or all-terrain vehicle. This kit will allow you to light up the trail with strategically placed lights on the vehicle. Perfect for night rock crawling.
Features:
50000+ Hr LED Lifespan
Instant On/Off - No Warm Up
RoHS Compliant
Over / Under Voltage Protection
Extruded Aluminum Housing
Durable Polycarbonate Lens
Integrated Thermal Management
GORE Pressure Equalizing Vent
Designed, Engineered, & Assembled in the USA
In the Box:
A-Series with 15’ Leads
Distribution Block for Easy Wiring
8’ Wiring Harness
Angled Mounting Pads w/30° Angle
Mounting Hardware
|
247.50 |
|
|
A-Series Rock Light Kit - 6 Cool White Lights - Black
The RIGID Rock Light Kit uses the power and durability of A-Series LED lighting and adds custom 15’ leads on each light, a distribution block, plus switch and angled mounts to light up any truck, Jeep, or all-terrain vehicle. This kit will allow you to light up the trail with strategically placed lights on the vehicle. Perfect for night rock crawling.
Features:
50000+ Hr LED Lifespan
Instant On/Off - No Warm Up
RoHS Compliant
Over / Under Voltage Protection
Extruded Aluminum Housing
Durable Polycarbonate Lens
Integrated Thermal Management
GORE Pressure Equalizing Vent
Designed, Engineered, & Assembled in the USA
In the Box:
A-Series with 15’ Leads
Distribution Block for Easy Wiring
8’ Wiring Harness
Angled Mounting Pads w/30° Angle
Mounting Hardware
|
360.00 |
|
|
Apeiron A1120 Spring Mount Light - Round - Red, Cool White & Blue - Polished Chrome
Features:
Advanced Optical System - 120° full angle. Even light, no LED “dots” or pixilation
Rugged Design - Stainless steel/anodized aluminum construction, sealed design, and electronic regulation to the LED source ensure product longevity
Spring Clip Mounting - Spring clip mounting offers simple installation while ensuring a secure fit when installed in dynamic applications
No Heat or UV in the Light Beam - With no heat in the light beam, the fixture lens remains much cooler than halogen sources, allowing safe and ‘burn free’ operation. In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
Stainless Steel Trim, with pvd Round, square or square/square, five finish options. Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
Product Highlights:
1.5 Watts
9-20VDC Input
3 Colors in 1 Fixture with only 2 wires
3" Diameter
Stainless Steel Construction
Exterior Rated
Typical Applications:
Marine Hardtop/Helm
Wine Cellar/Cooler Lighting
Decorative Accent Lighting
Exclusive Technology:
SmartDriver™ Integrated - i2Systems SmartDriver technology is integrated directly inside of every fixture. Connect the Apeiron to a wide range of voltages without sacrificing light output or lifetime. No external drivers are required and wiring is made simple.
Tri-Light Technology - i2Systems Tri-Light Technology offers 3 colors of light within a single fixture with only 2 wires. Simply toggle the input voltage off and back on again to change from one color to the next.
|
107.56 |
|