|
BURKS 315CS6M-AB, TURBINE PUMP 230/460v 3PH 1 1/2HP
All BRONZE Construction.
Close Coupled to a 11/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
Please Contact us for a shipping quote at http://www.clrmarine.com/Contact_Us
|
3912.30 |
|
|
BURKS 315CS7M, TURBINE PUMP 230/460v 3PH 1 1/2HP
All BRONZE Construction.
Close Coupled to a 11/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
Please Contact us for a shipping quote http://www.clrmarine.com/Contact_Us
|
2882.48 |
|
|
BURKS 33CT5M, TURBINE PUMP 230/460v 3PH 1/3HP
Bronze Fitted Cast Iron Construction. Close Coupled to a 1/3 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.
UNSPSC Code: 40150000
|
1960.20 |
|
|
Calpeda NM2/A 07H36S Centrifugal Pump 3Ph 3/4Hp
The motor of the Calpeda NM2/A 07H36S centrifugal pump has a power rating of three-quarters horsepower.
Calpeda Model number is NM 2/A-60
Three-phase 230/460 V
Insulation class F
Protection IP 44
Pump casing: Cast iron
Lantern bracket: GJL 200 EN 1561
Impeller: Brass CW510L (lead-free public LAW 111-380)
Shaft: Cr steel AISI 430
Cr Ni steel AISI 302 for 1 - 1.5 - 2.5 - 3 HP
Mechanical seal: Carbon- Ceramic- NBR
Liquid temperature from 14 F to 194 F
Ambient temperature up to 104 F
Total suction lift up to 23 ft
Maximum permissible working pressure up to 145 psi
(232 psi for pumps NMD)
Continuous duty
For clean liquids without abrasives, which are, non-aggressive
For the pump materials ( solids content up to 0.2%)
For water supply
For heating, air-conditioning, cooling, and circulation plants
For civil and industrial applications
For irrigation
|
790.02 |
|
|
BURKS 37G5-1 1/4, Centrifugal Pump 230/460v 3PH 3/4HP
Bronze Fitted Cast Iron Construction.
Close Coupled to a 3/4 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet.
Impeller Diameter is 4 Inches.
UNSPSC Code: 40150000
|
1591.20 |
|
|
March TE-6T-MD-3PH 3/4HP WEG Poly Glass Pmp W/3Ph 3/4Hp
|
954.90 |
|
|
Oberdorfer 300BP-30M36BJT Centrif Pump 3Ph 3/4Hp
This item is 'build to order'. Please contact us for lead time.
|
1868.26 |
|
|
March TE-8C-MD Magnetic Drive Pump
Applications include chemical recirculation, chemical transfer, deionized water systems, scrubber systems, detergent mixers, computer cooling, waste treatment plants, and plating operations.
The TE-8C-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.
March Pump's industrial TE-8C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 120 gallons per minute at 30 feet, and its maximum head is 95 Feet (or around 41PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, carbon filled Polypropylene, Viton, Teflon/Ryton/Carbon, and Ceramic. The inlet connection is 2 inch male pipe thread, and the outlet is 1.5 inch male pipe thread. The standard motor is a 3 Phase 230/460V 3 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-8C-MD centrifugal magnetic drive pump is capable of handling mildly, or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
120 GPM
400 LPM
Max Head
95 FT
20 M
Power
3 HP
2.2 KW
Electrical
3Ph 230/460V 50/60HZ
Contact us for a shipping quote
|
3679.43 |
|
|
Burks T37G5-1 1/4-SS-3.25, Centrifugal Pump
80gpm, 1-1/4" Outlet 3/4HP 3PH
|
5122.39 |
|
|
Applications for the TE-7S-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.
March Pump's industrial TE-7S-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 57.5 Feet (or around 25PSI). The standard wet end (the materials that come into contact with the solution) is composed of 316 Stainless Steel, Viton, Carbon, and Ceramic. The inlet connection is 1.5 inch female pipe thread, and the outlet is 1 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 1 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. The March TE-7S-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
53 GPM
180 LPM
Max Head
57.5 FT
12 M
Power
1 HP
.745 KW
Electrical
1Ph 115/230V or 3Ph 230/460V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1-1/2"FPT
Outlet
1"MPT
Wet End
316 Stainless Steel (Front Housing, Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)
Motor Options
Available in 1HP, 1.5HP, 1HP Explosion Proof or 1.5HP Explosion Proof
|
2452.95 |
|
|
Scot Pump 189-001-303-4.41 IMPELLER 48377X 4VANE 3/4HP
|
141.44 |
|
|
Bosworth 2600-1 1/4F Alum Hand Pump, Thr Ports
Bosworth Hand Diaphragm Pump Guzzler Epoxy Coated Aluminum, 1.4Qt per Stroke, 1 1/4” Female Threaded Ports, Buna Flapper Valves and Diaphragm, Universal Handle for Vertical or Horizontal Pumping Action
|
601.26 |
|
|
Sherwood G-3 1 1/4" Hrz Port Pump
|
665.90 |
|
|
BURKS 09812F, MOTOR 3PH 3HP ODP CS
|
2064.48 |
|
|
BURKS 375G6-2", Centrifugal Pump 3PH 7.5HP 230/460v
Centrifugal Pump and Motor unit.
Bronze Fitted Cast Iron Construction.
Close Coupled to a 7-1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 2-1/2 Inches NPT Inlet, 2 Inches NPT Outlet.
Impeller Diameter is 6.06 Inches.
UNSPSC Code: 40150000
|
3777.75 |
|