Drain Plug And Receiver Kit - 3/4" Diameter The Attwood Drain Plug and Receiver Kit ensures that a drain is closed properly.  Features: Molded black plastic with threaded receiver Molded retaining strap Includes attaching screws and elastomeric gasket for a watertight fit Specifications: Diameter: (inch) 3/4" *Intended for use on small recreational boats and jet skis

Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length (No Tank Fitting) This Attwood Fuel Line Kit is a reliable replacement for the original equipment on Johnson and Evinrude engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb. Features: These Attwood Hose Fittings Are Included: Two (2) 8889LP6 hose fittings for the tank end and for the engine end For Johnson/Evinrude engines and tanks *No Fuel Demand Valve or Tank Fitting is included in this kit

Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length This EPA-certified Attwood Johnson/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Features: These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6 Hose and tank fittings come with pre-applied thread sealant There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance For Johnson/Evinrude engines and tanks This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines *No Fuel Demand Valve in this kit

Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length with Fuel Demand Valve This EPA-certified Attwood Johnson/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Also, the kit includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine. Features: These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6 In-Line Fuel Demand Valve Hose and tank fittings come with pre-applied thread sealant Reliably delivers fuel to your Johnson or Evinrude engine *This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines

Drain Plug and Socket - White 15mm (19/32") Bore This screw-type drain plug and the socket are still among the best available. Also, it's supplied with a rubber ‘O’ ring for a watertight seal.  

PVC Coated Grab Handle - White - 9-3/4" Soft Grip Handle with concealed fasteners. Constructed of injection molded nylon with PVC coating. Installs with two #10 FH fasteners (included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

PVC Coated Grab Handle - Black - 9-3/4" Soft Grip Handle with concealed fasteners. Constructed of injection molded nylon with PVC coating. Installs with two #10 FH fasteners (included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Ampco Fluid End Aluminum Bronze Full Impeller for KC2 1 X 3/4

Groco Ibv-750 3/4 Bronze Ball Valve  

Bosworth 74-B-3/4   3/4" Barb   Bosworth- Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 3/4” Hose Barb

Yamaha Fuel Line Kit - 3/8" Diameter x 6' Length (No Tank Fitting) This Attwood Fuel Line Kit is a reliable replacement for the original equipment on Yamaha engines and tanks. The kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb. Features: These Attwood Hose Fittings Are Included: A pair of hose fittings 8896LP6 for the tank end and the engine end for Yamaha engines and tanks *No Fuel Demand Valve or Tank Fitting is included in this kit

Universal Fuel Line Kit - 3/8" Diameter x 6' Length This Attwood Fuel Line Kit is a reliable universal replacement for the original equipment on any brand of engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb.  Features: 3/8" x 6' Low Permeation Hose Universal for any engines and tanks Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors Reliably delivers fuel to your engine *Does not include fittings for the tank end and for the engine end

Mercury Fuel Line Kit - 3/8" Diameter x 6' Length (Pre-1998) This EPA-certified Attwood Mercury (Pre-1998) Fuel Line Kit reliably delivers fuel to your Pre-1998 Mercury engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Features: These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8893-6 For Mercury Pre-1998 engines and tanks It also includes an award-winning Universal Sprayless Connector (hose and tank fittings with pre-applied thread sealant) There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance *This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines.

Stainless Steel Thru-Hull Standard Straight Barbed - 3/4" Inner Diameter Polish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat? Rugged Stainless Construction: Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance All visible areas are polished to a mirror finish, then passivate each part for additional protection Thick steel sidewalls withstand continual stress and hose flexing Faster, Simpler Installation: Each Thru-Hull is available with a new silicone gasket A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull The barbed tail ends provide plenty of room to hold multiple clamps Stainless Steel Straight Thru-Hulls, Barbed Standard Thread model has a full-length thread for thick hulls and easy tightening Specifications: Hose size: (inch) 3/4" inner diameter Flange Diameter: (inch) 1-7/8" Thread O.D. (outside diameter): (inch) 1"  Thread Length: (inch) 2" Barb Length: (inch) 1-1/4" Total Length: (inch) 3-3/4" Install Hole Saw Size: (inch) 1-1/8"  Thread NPSM: (inch) 3/4" Max Hull Thickness: (inch) 1-5/8" *Stainless Steel Thru-Hull Connectors are designed for installation above the water line only

Mercury Fuel Line Kit - 3/8" Diameter x 6' Length (1998 & Newer) This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. It also includes a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine. Features: These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and hose fitting engine end 8896LP6 Universal for any engines and tanks In-Line Fuel Demand Valve The kit also has a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance *This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines