Perko Vented Flip Top Cap f/Fills with 1-1/2" Hose White Polymer Easily Mounts Directly on Gunnel with Removing Fill Body Includes Metallic Inserts for Gas, Diesel or Water Fills Integral Tank Vent with Flame Arrestor No Deck Plate Key or Ground Wire Required Flip Top Cap Technical Information Requires 5-1/4" Diameter Mounting Surface Screw Size: #8

Perko Vented Flip Top Cap f/Fills with 1-1/2" Hose Black Polymer Easily Mounts Directly on Gunnel with Removing Fill Body Includes Metallic Inserts for Gas, Diesel or Water Fills Integral Tank Vent with Flame Arrestor No Deck Plate Key or Ground Wire Required Flip Top Cap Technical Information Requires 5-1/4" Diameter Mounting Surface Screw Size: #8

White Flip Top Cap Fills for 1-1/2" Hose - White Features: White Polymer Integral Tank Vent with Flame Arrestor No Ground Wire Required EPA Compliant Flip Top Cap with Vacuum Pressure Relief Valve These fills meet the CARB and EPA requirements of U.S.C.G. Safety Standards (July 31, 2011) for 40 CFR Parts 9, 60, 80 et al. Control of Diurnal Emissions From Non-road Spark-Ignition Engines and Equipment. Specifications: For Hose Size: 1-1/2" For Vent Hose: 5/8" Neck Length: 2-7/16" Screw Size: #10 35° Angled Neck

Stainless Steel Flip Top Deck Fill - Gas - 1-1/2" Hose  Flip Top Hose Gas Fill is constructed of investment cast 316 stainless steel. Installs with four #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Little Giant Mag-Drive Pump 589002 Little Giant 1-MD Magnetic Drive Pump Motor 115 Volt 60 Hz 1/70 HP Open Fan Cooled Motor, 180 GPH at 1 Foot Head, Shutoff Head 10.6 Feet, Inlet: 1/2" Hose Barb, Outlet: 1/2" Hose Barb, Polypropylene Body, Fluid Temperature Up to 150F (66C), UR/C-CSA Listed, 6 Foot Power Cord   589002 Magnetically driven pump for mildly corrosive chemicals and solutions. The MD Series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use

Little Giant Submersible Pump 588205 Little Giant 1-EUAA-MD Submersible or In-Line Pump Motor 115 Volt 60Hz 1/200 HP Epoxy Encapsulated Motor, 150 GPH at 1 Foot Head, Shutoff Head 5 Feet, Inlet: 1/2" Hose or Screened, Outlet: 1/2" Hose, Polypropylene Body, Fluid Temperature Up to 120F (49C), UL/CSA Listed, 6 Foot Power Cord   588205 1" magnet drive pump is designed for salt or fresh water applications. This dual purpose, epoxy-encapsulated pump has 1/2" OD inlet for inline use and a screened inlet for submersible use.   This Little Giant Aquarium pump is ideal for aquariums.

Little Giant Mag-Drive Pump 588001 Little Giant 1-AA-MD Magnetic Drive Pump Motor 115 Volt 60Hz 1/200 HP Open Motor, 160 GPH at 1 Foot Head, Shutoff Head 5.4 Feet, 1 Inlet: 1/2" Hose Barb, Outlet: 1/2" Hose Barb, Polypropylene Body, Fluid Temperature Up to 150F (66C), UR/C-CSA Listed, 3 Foot Wire Leads    # Model Intake Size Discharge Listing HP Volts Hertz Amps Watts Performance (GPH @ Head) Shut Off Power Cord (ft) Weight (lbs) 1' 3' Ft PSI 588001 1-AA-MD 1/2" Hose 1/2" Hose UR/C-CSA 1/200 115 60 0.4 19 162 102 5.4 2.3 6 2.33   588001 Magnetically driven pump for mildly corrosive chemicals and solutions. The MD Series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use. Open shaded-pole motor has sleeve bearings and is impedance protected.   Circulation of mildly corrosive acids, alkalis, solvents, brine, plating solutions, sterile solutions, and other mildly corrosive chemicals and solutions that are compatible with the pump's material of construction

Emergency Deck Fill Plug Nitrile-Buna Rubber This Emergency Deck Fill Plug is a must for any vessel. Fits most 1-1/2" hose deck fills in the event you lose your cap. For temporary use only until you can replace your OEM cap. Constructed of fuel resistant Nitrile-Buna rubber. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Replacement Cap and Chain - 6001 Gas Fill Gas Fill, 1-1/2" Hose w/Splash Shield

Groco 12V-F 12V Motor 1/8Hp 3.5" Shaft  

Groco 24V-F 24V Motor 1/8Hp 3.5" Shaft  

Bronze Vented Loop - 1/2" Hose  Features: Allows air to enter to break siphon, but does not permit air and odors to escape! Cap is threaded 1/2" NPT to accept a barb fitting if you wish to vent overboard. Overboard venting is required if PVL or HVL series is used in an exhaust system. HVL and PVL series vented loops assure clog-free anti-siphon protection for sanitation or engine exhaust systems. The oversized vent valve can easily be removed for inspection or cleaning without tools. Mount Hardware is included.

Fuel System Locking Cap f/ 1-1/2" Non-Vented Fills (1324) Black Plastic with Gasket Built in Lock Cylinder Size #0 Fits PERKO Fills 1313 & 1399 Cap Outside Thread Diameter: 1-15/32"

Bosworth 74-1 Foot/Check Valve 1"   Bosworth- Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 1" Smooth Hose Ports

Bronze Vented Loop - 1-1/2" Hose  Features: Allows air to enter to break siphon, but does not permit air and odors to escape! Cap is threaded 1/2" NPT to accept a barb fitting if you wish to vent overboard. Overboard venting is required if PVL or HVL series is used in an exhaust system. HVL and PVL series vented loops assure clog-free anti-siphon protection for sanitation or engine exhaust systems. The oversized vent valve can easily be removed for inspection or cleaning without tools. Mount Hardware is included.