EuroLED 130 Surface Mount Touch Lamp - Red/White LED - White Housing
Advanced LED lamps with touch sensitive switching. Power saving and ultra durable. Designed and manufactured in New Zealand, EuroLED® Touch lamps provide red / white light using the latest completely sealed touch sensitive technology.
Lighting control is beautifully simple. Touch the color pad for red or blue light, the white pad for white light. On the dual color versions, hold your finger on the pad for more than two seconds and the lamp will cycle through four dimming levels. Release your finger on the light level required.
Dual color EuroLED® Touch lamps can also be remotely operated from multiple points with ‘off the shelf’ ON/OFF/ON momentary switches. Holding one of the external switches for two seconds will synchronize the lamps to the same dimming level. Light levels are ‘remembered’ by the lamps circuitry, even when a vessel’s batteries are turned off. The lamp will always turn on at the color intensity previously set, regardless of power interruption.
EuroLED® Touch current draw is 4W on white (0.33A @ 12V) and less than 1.5W on red or blue (less than 0.125A @ 12V) to provide significant power savings. Glare diffusion without light loss is important with any LED lamp to maintain efficiency and safety, particularly with powerful lamps such as the EuroLED® series. Without the protection of advanced optics, significant eye strain can result from periods of looking directly into a powerful LED point source. Advanced Hella marine lens technology provides a safe, smooth and uniform light pattern, without glare or discomfort.
The durability of EuroLED® Touch lamps is outstanding. Each lamp is completely waterproof, impact and shock resistant, for an ultra long service life. Multivolt™ circuitry provides consistent illumination across a range of input voltages from 9-33 DC, even under severe voltage fluctuations.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Shroud Material: Heavy duty nylon
Color Temperature: 5000K (White)
Cable: Pre-wired with 2.5M of three core marine cable
Operating Voltage: Multivolt 9-33V DC
Power Consumption: 4.0W ( 0.33A@12V / 0.16A@24V )
Degree of Protection: IP 6K6 6K7 - Completely Sealed
Weight: 290g (including cable)
Installation: Surface mount with robust bush mount
Approvals: CE, ISO 8846 (Ignition Protection)
|
153.42 | |
EuroLED 175 Surface Mount Touch Lamp - Blue/White LED - White Housing
Advanced LED lamps with touch sensitive switching. Power saving and ultra durable. Designed and manufactured in New Zealand, EuroLED® Touch lamps provide red / white light using the latest completely sealed touch sensitive technology.
Lighting control is beautifully simple. Touch the color pad for red or blue light, the white pad for white light. On the dual color versions, hold your finger on the pad for more than two seconds and the lamp will cycle through four dimming levels. Release your finger on the light level required.
Dual color EuroLED® Touch lamps can also be remotely operated from multiple points with ‘off the shelf’ ON/OFF/ON momentary switches. Holding one of the external switches for two seconds will synchronize the lamps to the same dimming level. Light levels are ‘remembered’ by the lamps circuitry, even when a vessel’s batteries are turned off. The lamp will always turn on at the color intensity previously set, regardless of power interruption.
EuroLED® Touch current draw is 4W on white (0.33A @ 12V) and less than 1.5W on red or blue (less than 0.125A @ 12V) to provide significant power savings. Glare diffusion without light loss is important with any LED lamp to maintain efficiency and safety, particularly with powerful lamps such as the EuroLED® series. Without the protection of advanced optics, significant eye strain can result from periods of looking directly into a powerful LED point source. Advanced Hella marine lens technology provides a safe, smooth and uniform light pattern, without glare or discomfort.
The durability of EuroLED® Touch lamps is outstanding. Each lamp is completely waterproof, impact and shock resistant, for an ultra long service life. Multivolt™ circuitry provides consistent illumination across a range of input voltages from 9-33 DC, even under severe voltage fluctuations.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Shroud Material: Heavy duty nylon
Color Temperature: 5000K (White)
Cable: Pre-wired with 2.5M of three core marine cable
Operating Voltage: Multivolt 9-33V DC
Power Consumption: 4.0W ( 0.33A@12V / 0.16A@24V )
Degree of Protection: IP 6K6 6K7 - Completely Sealed
Weight: 290g (including cable)
Installation: Surface mount with robust bush mount
Approvals: CE, ISO 8846 (Ignition Protection)
|
153.42 | |
Surface Mount Oblong LED Courtesy Lamp - Warm White LED - Stainless Steel Bezel
Oblong LED lamps are offered as either dedicated step lamps or general courtesy illumination with equal vertical spread.
Step lamps carry engineered optics to direct light downwards at 30° safely illuminating deck and step tread surfaces without shining into the eyes.
Completely sealed and ultra durable, Hella Marine LED lamps may be installed on a vessels interior or exterior, wet or dry.
Polished 316 Stainless Steel bezels are included with each part number. Black and white plastic end caps are also included.
Specifications:
Lens Material: UV and enhanced impact resistant Grilamid
Rim Material: 316 stainless steel
Cable: Pre-wired with 120mm of marine cable
Operating Voltage: Multivolt 12 / 24V DC
Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 35g (including cable)
Approvals: CE
|
27.34 | |
EuroLED 130 Touch - White/Red - Black Shroud
Advanced LED lamps with touch-sensitive switching. Power saving and ultra-durable. Designed and manufactured in New Zealand, EuroLEDTouch lamps provide red/white light using the latest completely sealed touch-sensitive technology.
Lighting control is beautifully simple. Touch the color pad for red or blue light, the white pad for white light. On the dual-color versions, hold your finger on the pad for more than two seconds and the lamp will cycle through four dimming levels. Release your finger on the light level required.
Dual-color EuroLED Touch lamps can also be remotely operated from multiple points with ‘off the shelf’ ON/OFF/ON momentary switches. Holding one of the external switches for two seconds will synchronize the lamps to the same dimming level. Light levels are ‘remembered’ by the lamp's circuitry, even when a vessel’s batteries are turned off. The lamp will always turn on at the color intensity previously set, regardless of power interruption.
EuroLED Touch current draw is 4W on white (0.33A @ 12V) and less than 1.5W on red or blue (less than 0.125A @ 12V) to provide significant power savings. Glare diffusion without light loss is important with any LED lamp to maintain efficiency and safety, particularly with powerful lamps such as the EuroLED series. Without the protection of advanced optics, significant eye strain can result from periods of looking directly into a powerful LED point source. Advanced Hella marine lens technology provides a safe, smooth, and uniform light pattern, without glare or discomfort.
The durability of EuroLED Touch lamps is outstanding. Each lamp is completely waterproof, impact, and shock-resistant, for ultra-long service life. MultivoltTM circuitry provides consistent illumination across a range of input voltages from 9-33 DC, even under severe voltage fluctuations.
Features:
All HELLA Marine LED Lamps feature advanced materials and state of the art technology for reliability, efficiency, and safety at sea
Completely sealed housing and cable entry with robust bush mount
Mounting bosses eliminate torque load on housing while heavy-duty shroud clips over lamp body
Dual-color EuroLED Touch lamps feature dimming and remote momentary switch control
Touch the color pad for on or off, hold finger on the pad to cycle through dimming levels
LED
12/24V Multivolt
IP67 Completely Sealed
UV Resistant
5-Year Warranty
Black Shroud
White/Red
|
153.42 | |
EuroLED 150 Recessed Surface Mount Touch Lamp - Red/Warm White LED - White Plastic Rim
Efficient, state-of-the art LED lamps offering advanced technology for durable and power saving interior and exterior installations. The durability and single LED efficiency of Hella marine EuroLED® technology continues in a new generation of completely sealed recess mount LED lamps.
Dual color EuroLED® Touch lamps with dimming and remote momentary switch control. Touch the color pad for ON/OFF, hold finger on the pad to cycle through dimming levels.
Proven Hella marine touch switching technology makes lighting control beautifully simple. Touch the red pad for red light, the white pad for white light. Hold your finger on the pad for more than two seconds and the lamp will cycle through increasing / decreasing intensity levels until the maximum / minimum intensity is achieved. Release your finger on the light level required. Power consumption is a low 4W on neutral white or warm white (0.33A @12V) and less than 1.5W on red (less than 0.125A@12V). This provides significant energy savings on board, yet each device offers an effective intensity and wide spread of effective illumination and comfortable color temperatures.
The durability of EuroLED® Touch lamps is outstanding. Each device is a sealed unit, highly impact and shock resistant for an ultra long service life. Integrated Multivolt™ electronics provide consistent illumination and protection across a range of input voltages from 9-33 DC, even under severe voltage fluctuations, low battery voltages and long cable runs. EuroLED® Touch technology provides ultra reliable, power saving illumination for a wide range of commercial and recreational applications.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Color Temperature: 4200K (White)
Cable: Pre-wired with 500mm of triple core marine cable
Operating Voltage: Multivolt 9-33V DC
Power Consumption: 4.0W ( 0.33A@12V / 0.16A@24V )
Degree of Protection: Completely Sealed
Weight: 245g (including cable)
Installation: Recessed mount
Approvals: CE
|
133.67 | |
EuroLED 75 3" Round Screw Mount Down Light - Warm White LED - White Plastic Rim - 24V
Stylish, reliable, and energy-efficient, these lamps will provide excellent illumination to enhance interior and exterior spaces.
The EuroLED 75 uses a highly efficient optical system that produces a very wide and even illumination that is specifically designed to reduce individual light source glare, which can lead to discomfort and eye strain.
This precision optic, coupled with the latest LED technology delivers exceptional color rendering, reproducing colors in their natural richness. The EuroLED 75 replicates the pleasing appearance of a traditional round lamp but contains all the advantages of high efficacy, and durable solid-state light - giving you the best of both worlds.
EuroLED 75 is available in warm or neutral white which will beautifully enhance the materials chosen for your vessel. Screw or spring mount options, pre-wired and sized for a standard cut out make new or refit installation a breeze.
Hella marine EuroLED lamps are completely sealed and manufactured using the highest grade materials that will not corrode, fade or embrittle in the harsh marine environment. Innovative, ceramic-based thermally conductive materials dissipate heat generated by the LEDs, thereby extending the life of the luminaire, whilst being completely corrosion free. This means you can use the same light fittings for both the interior and exterior to create a clean and consistent lighting plan.
Like all Hella marine LED lamps, the EuroLED 75 is supported by a 5-year warranty for complete peace of mind.
Specifications:
Rim material: UV-resistant plastic or 316 stainless steel options
Color Temperature: 5000K (White), 2700K (Warm White)
Dimming: Via PWM or Voltage Resistive dimmer
Cable: Pre-wired with 150mm tinned marine cable
Operating Voltage: 12V or 24V DC options
Power Consumption: <3W ( <0.19A @ 12V DC / <0.1A @ 24V DC)
Degree of Protection: IP6K7 & IP6K9K (Completely sealed)
Installation: Screw or Spring Clip options
Approvals: CE, RCM
Manufactured In: New Zealand
|
27.79 | |
Hella Marine EuroLED 75 3" Round Screw Mount Down Light - Warm White LED - Stainless Steel Rim - 12V EuroLED 75 3" Round Screw Mount Down Light - Warm White LED - Stainless Steel Rim - 12V
Stylish, reliable and energy efficient, these lamps will provide excellent illumination to enhance interior and exterior spaces.
The EuroLED 75 uses a highly efficient optical system that produces a very wide and even illumination that is specifically designed to reduce individual light source glare, which can lead to discomfort and eye strain.
This precision optic, coupled with the latest LED technology delivers exceptional color rendering, reproducing colors in their natural richness. The EuroLED 75 replicates the pleasing appearance of a traditional round lamp but contains all the advantages of a high efficacy, durable solid state light - giving you the best of both worlds.
EuroLED 75 is available in warm or neutral white which will beautifully enhance the materials chosen for your vessel. Screw or spring mount options, pre-wired and sized for a standard cut out make new or refit installation a breeze.
Hella marine EuroLED lamps are completely sealed and manufactured using the highest grade materials that will not corrode, fade or embrittle in the harsh marine environment. Innovative, ceramic based thermally conductive materials dissipate heat generated by the LED’s, thereby extending the life of the luminaire, whilst being completely corrosion free. This means you can use the same light fittings for both the interior and exterior to create a clean and consistent lighting plan.
Like all Hella marine LED lamps the EuroLED 75 is supported by a 5 year warranty for complete peace of mind.
Specifications:
Rim material: UV resistant plastic or 316 stainless steel options
Color Temperature: 5000K (White), 2700K (Warm White)
Dimming: Via PWM or Voltage Resistive dimmer
Cable: Pre-wired with 150mm tinned marine cable
Operating Voltage: 12V or 24V DC options
Power Consumption: <3W ( <0.19A @ 12V DC / <0.1A @ 24V DC)
Degree of Protection: IP6K7 & IP6K9K (Completely sealed)
Installation: Screw or Spring Clip options
Approvals: CE, RCM
Manufactured In: New Zealand
|
41.02 | |
EuroLED 75 3" Round Screw Mount Down Light - Warm White LED - White Plastic Rim - 12V
Stylish, reliable and energy efficient, these lamps will provide excellent illumination to enhance interior and exterior spaces.
The EuroLED 75 uses a highly efficient optical system that produces a very wide and even illumination that is specifically designed to reduce individual light source glare, which can lead to discomfort and eye strain.
This precision optic, coupled with the latest LED technology delivers exceptional color rendering, reproducing colors in their natural richness. The EuroLED 75 replicates the pleasing appearance of a traditional round lamp but contains all the advantages of a high efficacy, durable solid state light - giving you the best of both worlds.
EuroLED 75 is available in warm or neutral white which will beautifully enhance the materials chosen for your vessel. Screw or spring mount options, pre-wired and sized for a standard cut out make new or refit installation a breeze.
Hella marine EuroLED lamps are completely sealed and manufactured using the highest grade materials that will not corrode, fade or embrittle in the harsh marine environment. Innovative, ceramic based thermally conductive materials dissipate heat generated by the LED’s, thereby extending the life of the luminaire, whilst being completely corrosion free. This means you can use the same light fittings for both the interior and exterior to create a clean and consistent lighting plan.
Like all Hella marine LED lamps the EuroLED 75 is supported by a 5 year warranty for complete peace of mind.
Specifications:
Rim material: UV resistant plastic or 316 stainless steel options
Color Temperature: 5000K (White), 2700K (Warm White)
Dimming: Via PWM or Voltage Resistive dimmer
Cable: Pre-wired with 150mm tinned marine cable
Operating Voltage: 12V or 24V DC options
Power Consumption: <3W ( <0.19A @ 12V DC / <0.1A @ 24V DC)
Degree of Protection: IP6K7 & IP6K9K (Completely sealed)
Installation: Screw or Spring Clip options
Approvals: CE, RCM
Manufactured In: New Zealand
|
33.42 | |
Hella Marine EuroLED 75 3" Round Screw Mount Down Light - Warm White LED - Stainless Steel Rim - 24V EuroLED 75 3" Round Screw Mount Down Light - Warm White LED - Stainless Steel Rim - 24V
Stylish, reliable and energy efficient, these lamps will provide excellent illumination to enhance interior and exterior spaces.
The EuroLED 75 uses a highly efficient optical system that produces a very wide and even illumination that is specifically designed to reduce individual light source glare, which can lead to discomfort and eye strain.
This precision optic, coupled with the latest LED technology delivers exceptional color rendering, reproducing colors in their natural richness. The EuroLED 75 replicates the pleasing appearance of a traditional round lamp but contains all the advantages of a high efficacy, durable solid state light - giving you the best of both worlds.
EuroLED 75 is available in warm or neutral white which will beautifully enhance the materials chosen for your vessel. Screw or spring mount options, pre-wired and sized for a standard cut out make new or refit installation a breeze.
Hella marine EuroLED lamps are completely sealed and manufactured using the highest grade materials that will not corrode, fade or embrittle in the harsh marine environment. Innovative, ceramic based thermally conductive materials dissipate heat generated by the LED’s, thereby extending the life of the luminaire, whilst being completely corrosion free. This means you can use the same light fittings for both the interior and exterior to create a clean and consistent lighting plan.
Like all Hella marine LED lamps the EuroLED 75 is supported by a 5 year warranty for complete peace of mind.
Specifications:
Rim material: UV resistant plastic or 316 stainless steel options
Color Temperature: 5000K (White), 2700K (Warm White)
Dimming: Via PWM or Voltage Resistive dimmer
Cable: Pre-wired with 150mm tinned marine cable
Operating Voltage: 12V or 24V DC options
Power Consumption: <3W ( <0.19A @ 12V DC / <0.1A @ 24V DC)
Degree of Protection: IP6K7 & IP6K9K (Completely sealed)
Installation: Screw or Spring Clip options
Approvals: CE, RCM
Manufactured In: New Zealand
|
41.02 | |
EuroLED 75 3" Round Spring Mount Down Light - Warm White LED - White Plastic Rim - 12V
Stylish, reliable and energy efficient, these lamps will provide excellent illumination to enhance interior and exterior spaces.
The EuroLED 75 uses a highly efficient optical system that produces a very wide and even illumination that is specifically designed to reduce individual light source glare, which can lead to discomfort and eye strain.
This precision optic, coupled with the latest LED technology delivers exceptional color rendering, reproducing colors in their natural richness. The EuroLED 75 replicates the pleasing appearance of a traditional round lamp but contains all the advantages of a high efficacy, durable solid state light - giving you the best of both worlds.
EuroLED 75 is available in warm or neutral white which will beautifully enhance the materials chosen for your vessel. Screw or spring mount options, pre-wired and sized for a standard cut out make new or refit installation a breeze.
Hella marine EuroLED lamps are completely sealed and manufactured using the highest grade materials that will not corrode, fade or embrittle in the harsh marine environment. Innovative, ceramic based thermally conductive materials dissipate heat generated by the LED’s, thereby extending the life of the luminaire, whilst being completely corrosion free. This means you can use the same light fittings for both the interior and exterior to create a clean and consistent lighting plan.
Like all Hella marine LED lamps the EuroLED 75 is supported by a 5 year warranty for complete peace of mind.
Specifications:
Rim material: UV resistant plastic or 316 stainless steel options
Color Temperature: 5000K (White), 2700K (Warm White)
Dimming: Via PWM or Voltage Resistive dimmer
Cable: Pre-wired with 150mm tinned marine cable
Operating Voltage: 12V or 24V DC options
Power Consumption: <3W ( <0.19A @ 12V DC / <0.1A @ 24V DC)
Degree of Protection: IP6K7 & IP6K9K (Completely sealed)
Installation: Screw or Spring Clip options
Approvals: CE, RCM
Manufactured In: New Zealand
|
34.93 | |
EuroLED 75 3" Round Spring Mount Down Light - Warm White LED - Stainless Steel Rim - 12V
Stylish, reliable and energy efficient, these lamps will provide excellent illumination to enhance interior and exterior spaces.
The EuroLED 75 uses a highly efficient optical system that produces a very wide and even illumination that is specifically designed to reduce individual light source glare, which can lead to discomfort and eye strain.
This precision optic, coupled with the latest LED technology delivers exceptional color rendering, reproducing colors in their natural richness. The EuroLED 75 replicates the pleasing appearance of a traditional round lamp but contains all the advantages of a high efficacy, durable solid state light - giving you the best of both worlds.
EuroLED 75 is available in warm or neutral white which will beautifully enhance the materials chosen for your vessel. Screw or spring mount options, pre-wired and sized for a standard cut out make new or refit installation a breeze.
Hella marine EuroLED lamps are completely sealed and manufactured using the highest grade materials that will not corrode, fade or embrittle in the harsh marine environment. Innovative, ceramic based thermally conductive materials dissipate heat generated by the LED’s, thereby extending the life of the luminaire, whilst being completely corrosion free. This means you can use the same light fittings for both the interior and exterior to create a clean and consistent lighting plan.
Like all Hella marine LED lamps the EuroLED 75 is supported by a 5 year warranty for complete peace of mind.
Specifications:
Rim material: UV resistant plastic or 316 stainless steel options
Color Temperature: 5000K (White), 2700K (Warm White)
Dimming: Via PWM or Voltage Resistive dimmer
Cable: Pre-wired with 150mm tinned marine cable
Operating Voltage: 12V or 24V DC options
Power Consumption: <3W ( <0.19A @ 12V DC / <0.1A @ 24V DC)
Degree of Protection: IP6K7 & IP6K9K (Completely sealed)
Installation: Screw or Spring Clip options
Approvals: CE, RCM
Manufactured In: New Zealand
|
42.53 | |
EuroLED 75 3" Round Spring Mount Down Light - Warm White LED - White Plastic Rim - 24V
Stylish, reliable and energy efficient, these lamps will provide excellent illumination to enhance interior and exterior spaces.
The EuroLED 75 uses a highly efficient optical system that produces a very wide and even illumination that is specifically designed to reduce individual light source glare, which can lead to discomfort and eye strain.
This precision optic, coupled with the latest LED technology delivers exceptional color rendering, reproducing colors in their natural richness. The EuroLED 75 replicates the pleasing appearance of a traditional round lamp but contains all the advantages of a high efficacy, durable solid state light - giving you the best of both worlds.
EuroLED 75 is available in warm or neutral white which will beautifully enhance the materials chosen for your vessel. Screw or spring mount options, pre-wired and sized for a standard cut out make new or refit installation a breeze.
Hella marine EuroLED lamps are completely sealed and manufactured using the highest grade materials that will not corrode, fade or embrittle in the harsh marine environment. Innovative, ceramic based thermally conductive materials dissipate heat generated by the LED’s, thereby extending the life of the luminaire, whilst being completely corrosion free. This means you can use the same light fittings for both the interior and exterior to create a clean and consistent lighting plan.
Like all Hella marine LED lamps the EuroLED 75 is supported by a 5 year warranty for complete peace of mind.
Specifications:
Rim material: UV resistant plastic or 316 stainless steel options
Color Temperature: 5000K (White), 2700K (Warm White)
Dimming: Via PWM or Voltage Resistive dimmer
Cable: Pre-wired with 150mm tinned marine cable
Operating Voltage: 12V or 24V DC options
Power Consumption: <3W ( <0.19A @ 12V DC / <0.1A @ 24V DC)
Degree of Protection: IP6K7 & IP6K9K (Completely sealed)
Installation: Screw or Spring Clip options
Approvals: CE, RCM
Manufactured In: New Zealand
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
34.93 | |
EuroLED 75 3" Round Spring Mount Down Light - Warm White LED - Stainless Steel Rim - 24V
Stylish, reliable and energy efficient, these lamps will provide excellent illumination to enhance interior and exterior spaces.
The EuroLED 75 uses a highly efficient optical system that produces a very wide and even illumination that is specifically designed to reduce individual light source glare, which can lead to discomfort and eye strain.
This precision optic, coupled with the latest LED technology delivers exceptional color rendering, reproducing colors in their natural richness. The EuroLED 75 replicates the pleasing appearance of a traditional round lamp but contains all the advantages of a high efficacy, durable solid state light - giving you the best of both worlds.
EuroLED 75 is available in warm or neutral white which will beautifully enhance the materials chosen for your vessel. Screw or spring mount options, pre-wired and sized for a standard cut out make new or refit installation a breeze.
Hella marine EuroLED lamps are completely sealed and manufactured using the highest grade materials that will not corrode, fade or embrittle in the harsh marine environment. Innovative, ceramic based thermally conductive materials dissipate heat generated by the LED’s, thereby extending the life of the luminaire, whilst being completely corrosion free. This means you can use the same light fittings for both the interior and exterior to create a clean and consistent lighting plan.
Like all Hella marine LED lamps the EuroLED 75 is supported by a 5 year warranty for complete peace of mind.
Specifications:
Rim material: UV resistant plastic or 316 stainless steel options
Color Temperature: 5000K (White), 2700K (Warm White)
Dimming: Via PWM or Voltage Resistive dimmer
Cable: Pre-wired with 150mm tinned marine cable
Operating Voltage: 12V or 24V DC options
Power Consumption: <3W ( <0.19A @ 12V DC / <0.1A @ 24V DC)
Degree of Protection: IP6K7 & IP6K9K (Completely sealed)
Installation: Screw or Spring Clip options
Approvals: CE, RCM
Manufactured In: New Zealand
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
41.02 | |
Surface Mount Oblong LED Courtesy Lamp - Red LED - Stainless Steel Bezel
Oblong LED lamps are offered as either dedicated step lamps or general courtesy illumination with equal vertical spread.
Step lamps carry engineered optics to direct light downwards at 30° safely illuminating deck and step tread surfaces without shining into the eyes.
Completely sealed and ultra durable, Hella Marine LED lamps may be installed on a vessels interior or exterior, wet or dry.
Polished 316 Stainless Steel bezels are included with each part number. Black and white plastic end caps are also included.
Specifications:
Lens Material: UV and enhanced impact resistant Grilamid
Rim Material: 316 stainless steel
Cable: Pre-wired with 120mm of marine cable
Operating Voltage: Multivolt 12 / 24V DC
Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 35g (including cable)
Approvals: CE
|
27.34 | |
NaviLED PRO Port Navigation Lamp - 2nm - Red Lens/White Housing
Ultra durable, power saving LED navigation lamps for enhanced safety.
NaviLED®PRO lamps are proven worldwide on commercial, military and recreational vessels.
Ultra low current draw
Port, Starboard and Stern lamps consume less than 3.2W combined.
No bulbs, No maintenance, Ultra long service life
Hella marine LED technology has no filaments to break making NaviLED®PRO lamps extremely shock and vibration proof for proven reliability and safety in demanding conditions.
Multivolt™ 9-33V DC
Advanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages.
Fully sealed for life. IP 67 certified
Each NaviLED®PRO lamp is a completely sealed unit. High impact housings ensure durability from waves and impact. Ultra heavy duty BSH versions use high-tech Grilamid® lens to offer superior strength in extreme conditions.
Pre-wired with 2.5M of twin core marine cable
High quality cable assemblies for time saving, completely sealed installations.
Specifications:
Material Description: High impact resistant acrylic lens
Minimum Visible Distance: 2 Nautical Miles (Yachts and Powerboats)
Cable: Pre-wired with 2.5M of twin core marine cable
Operating Voltage: Multivolt™ 9-33V DC
Voltage Protection: Spike protected to +500 volts. Reverse polarity protected to -700 volts
Power Consumption: Port, Starboard and Stern - Less than 3.2W combined.
Degree of Protection: IP 67 - Completely Sealed
Weight: 250g (including cable)
Approvals: IMO Col Reg 72, RINA, USCG, ABYC A-16, Maritime NZ
|
136.70 | |