Single Lead Block - 19mm(3/4") Sheave Diameter Lead blocks are a low profile solution for leading halyards or other rig sail controls back to cleats or jammers. Applications: Typically used in dinghy spars for control lines Materials: U.V. stabilized Acetal sheave Grade 316 stainless steel load housing Sheave Ø: 19mm(3/4") Max. Rope Ø: 8mm(5/16") Fastener Ø: 5.0mm(3/16") M.W.L.: 250kg(550lbs) B. L.: 550kg(1,100lbs) Weight: 20g(0.7oz)

Wire Block - Tubular Rivet Head w/Removable Nylatron® Sheave - 45mm(1-3/4") Sheave Diameter Wire blocks have purpose designed narrow sheaves and grooves.Removal sheave for easy fitting and without cutting the wire termination Features: Flared cheeks to minimise chafing Removable sheaves Applications: Wire blocks suit halyards, vang and backstay applications Materials: Grade 316 stainless steel cheeks Nylatron® sheave Specifications: Sheave Ø: 45mm(1-3/4") Max. Cable Ø: 6mm(1/4") M.W.L:850kg(1,870lbs) B.L.: 1,700kg(3,740lbs) Weight: 88kg(3.1oz)

Single Lead Block - 29mm(1-3/32") Sheave Diameter Lead blocks are a low profile solution for leading halyards or other rig sail controls back to cleats or jammers. Applications: Typically used in dinghy spars for control lines Materials: U.V. stabilized Acetal sheave Grade 316 stainless steel load housing Sheave Ø: 29mm(1-3/32") Max. Rope Ø: 6mm(1/4") Fastener Ø: 5.0mm(3/16") M.W.L.: 600kg(1,320lbs) B. L.: 1,200kg(2,640lbs) Weight: 50g(1.8oz)

Toggle Pin - 19mm(3/4") Length 6.4mm(1/4") Diameter Grade 316 Stainless Steel

Clevis Pin - 4.7mm (3/16") x 19mm (3/4") Grade 316 Stainless Steel

Backing Block for 3/4" & 1" Seacocks Features: Each size fits multiple seacock sizes Press threaded brass inserts into the hull side of the backing block into the holes that match the seacock flange Rigid 1/2" thickness provides secure installation but is flexible enough to conform to minor hull curvature Will not swell or absorb moisture Made from an environmentally friendly PVC foam specially formulated for marine applications

White Plastic Double Ended Connector - 3/4" Inner Diameter Double-Ended Thru-Hull provides a watertight transition through bulkheads or tanks.  Specifications: Fits Hose Size: (inch) 1-1/2" inner diameter Stem Length: (inch) 5-1/2" Max Hull Thickness; (inch) 3-1/8" Flange Diameter: (inch) 2-3/4" Installation Hole Size: (inch) 2" *Plastic Thru-Hull Connectors are designed for installation above the water line only

Teak Flag Pole - 18" - 3/4" Base Diameter Features: Teak Flag Pole 18" Length 3/4" Base Diameter Hardware not included Traditional ball cap style flag pole

Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball The RAM® Torque™ handlebar and rail mounting base has a 1" rubber ball and accommodates bars 3/4" to 1" in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. Mounting Base Dimensions: Accommodates rails 3/4" to 1" in diameter Specs & Features Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag Weight: 0.32lbs

RAM® Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball, Medium Arm and Diamond Ball Base Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1" ball base that accommodate bars 3/4" to 1" in diameter with a B-sized standard length arm and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. Mounting Base Dimensions: Accommodates rails 3/4" to 1" in diameter  Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size 

RAM® Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball, SHORT Arm and Level Cup™ Take your drink on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1" ball base that accommodate bars 3/4" to 1" in diameter with a B-sized short length arm and Level Cup™ Drink Holder & Koozie. Mounting Base Dimensions: Accommodates rails 3/4" to 1" in diameter  Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size 

RAM® Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball, SHORT Arm and Diamond Plate Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1" ball base that accommodate bars 3/4" to 1" in diameter with a B-sized short length arm and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. Mounting Base Dimensions: Accommodates rails 3/4" to 1" in diameter  Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size 

Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with C Size 1.5" Ball The RAM® Torque™ handlebar and rail mounting base has a 1.5” rubber ball and accommodates bars 3/4” to 1” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. Mounting Base Dimensions: Accommodates rails 0.75" to 1" in diameter Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball "C" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Level Cup™ XL with Torque™ 3/4" – 1" Diameter Rail Base and Short Arm Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup XL keeps your drink upright, regardless of the conditions. This kit includes a short arm and a Torque™ base that accommodates round rails from .5” through 1”. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sized cups as well. RAM® Mounts has refined the self-leveling action to keep your cups full.  Common Beverage Sizes: - 12oz Cans - Water Bottles - Insulated Cups - 32oz Containers (Nalgene, Pelican, Contingo, Hydro Flask) Compatible Dimensions: Width Range: 2.6" - 3.5" Height Range: 3.75" - 11" Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM® Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball, SHORT Arm and GoPro®/Action Camera Mount The RAM® Torque™ handlebar and rail mounting base has a 1” rubber ball and accommodates bars 3/4” to 1” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. Included is a short double socket arm and a GoPro/Action Camera mount. Mounting Base Dimensions: Accommodates rails 3/4" to 1" in diameter  Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size