Roper Pump 2AM27 Pump Mech Seal Relief Valve Roper A Series Gear Pump model 2AM27   Cast Iron Housing Ductile Iron Gears Bronze Bushings Mechanical Seal With Relief Valve 2″ NPT Ports

Roper Pump G14-338 Mechanical Seal

Roper Pump G4-397 A Ser Mech Seal

Roper Pump D83-5 Lip Seal

Roper Pump G17-71 Lip Seal Tef For 2835

Tuthill 0LEV-C-A-7 Pump Tuthill 0LEV-C-A-7 Pump with Relief valve CW rotation only with Tang Shaft Tuthill 0LE Series are compact, highly efficient, cast iron positive displacement rotary gear pumps with a mechanical seal. Pumping action is based on a rotor, idler gear, and a cover cast with a crescent-shaped partition. They are self priming and particularly suited to handle liquids of 35 to 1000 SSU viscosity. Higher viscosities can be handled at reduced speeds. The pump has a non-pulsating flow and runs substantially quieter than other pump designs.   Features : Pump Body: Cast Iron Relief Valve: Relief valve is factory set to 55 PSI for spring adjustment between 55-120 PSI. Shaft Seal: Mechanical Seal Viton Port Size: Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT.

Roper Pump G4-101 Mech Seal Buna

Roper Pump G4-112 Mech Seal Buna

Roper Pump G4-140 Viton Mech Seal

Roper Pump N3-177 Plain Faceplate For 3600 Ser

Roper Pump N3-200 Rv Faceplate For 3600 Ser

Roper Pump 1AM03 Pump W/O Relief Valve Mech Roper A Series Gear Pump model 1AM03   Cast Iron Housing/ Ductile Iron Gears/ Bronze Bushings/ Buna Mechanical Seal/ No Relief Valve 3/4″ NPT Ports General Transfer Applications

Roper Pump 2AM21 1 1/2 A Ser Gear Pump W/Rv Roper A Series Gear Pump model 2AM21   Cast Iron Housing Ductile Iron Gears Bronze Bushings Mechanical Seal With Relief Valve 1 1/2″ NPT Ports

Roper Pump 3711HBFRV Gear Pump W/Mech Seal Features Heavy duty cast iron helical gear pumps Bi directional, self-priming Differential pressures to 125 PSI Up to 468 GPM Standard operation up to 212° F Can be built to operate up to 450° F Maintenance-free durability   This pump operates smoothly and with equal efficiency in either direction of rotation. They effectively handle heavy, viscous materials such as asphalt, molasses, roofing compounds, and printing inks, as well as fuel oils, gasolines, and similar thin liquids. Pumps can be supplied in several materials of construction, with or without built-in relief valves. Pumps can be assembled either hi-drive or low-drive, and are available with conventional packed box or lapped-face mechanical shaft seal. They can be direct driven or driven through a built-in gear reduction with a wide range of ratios. These pumps operate equally well regardless of the mounting configuration or the direction of rotation.   Applications: Mixing, blending, recirculating, and transferring heavy, viscous materials in either a fixed or mobile transfer application. Ideal for gasoline, asphalt, molasses, ink, roofing compound, and coils.   Ships Via Truck only ask us for a shipping quote at the Contact Us page. Please provide City,State and Zip Code.

Roper Pump 18AM02-2B A Series Gear Pump W/Rv Ports: 3/8 in. Flow-Rate: 7.2 GPM Max RPM: 3600 GPR: .002 Mtg: Flange   Roper A Series pumps are adaptable to a wide range of applications pumping clean ?uids, such as pressure lubrication, hydraulic service, fuel supply or general liquid transfer.   These pumps are designed to operate at standard motor speeds, with provisions for ?ange or foot mounting. The internal bearings are lubricated by the ?uid being pumped. With only two moving parts, the pumps run quietly.   3/8" and 3/4" pumps are 300 PSI and all 1 1/4" - 2" pumps are 150 PSI   Specifications Type of Pump: Positive Displacement Gear Pump Materials of Construction: Cast Iron Housing, Ductile Iron Gears and Drive Shafts, Bronze Bearings and Steel Idler Shafts. Priming: Self Priming Seal Material: Mechanical Seal (AM) Viscosity: Up to 2,200 cSt, 10,000 SSU