Roper Pump G4-140 Viton Mech Seal

Haight Pump 3U-VMS Pump Viton Mech Seal No Rv Specifications Gear Design:  Involute Gear Construction Material:  Ductile Iron Capacity (max):  3 gpm Discharge Pressure (max):  250 psi Temperature:  620 degrees F Seal: Viton Mechanical Seal   3U - DIU Series Round Hub Positive Displacement Pumps The Universal Pump Design combines the innovation of our UniverSeal shaft seal, the rugged simplicity of Haight's proven "gear within a gear" internal gear configuration, with the flexibility of a bolt-on, integral Relief Valve assembly. This combination of pump features offers pump users unsurpassed flexibility to adapt their pumps to changing system requirements. Universal Relief Valve - the relief valve assembly can be added at any time, in the field, with no special tools. The valve can function in either the return to suction mode, or return to tank mode. Available with three different tension springs, the relief valve operates smoothly and effectively over a broad range of setting values.

MP Pumps 21366 PUMP FM10 C/I 184TC MT Flomax 10 Pumpaks are liquid-ends less power source. Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Cast iron construction and will fit 184C/145TC NEMA motors with feet. PumPaks are provided less motors and with 5" maximum impeller diameters.   Specifications Rated Capacity 140 GPM Maximum Head: 92 feet (40 PSI) Suction & Discharge Connections: 2" X 2" FNPT Impeller Diameter: Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss weight; 304 stainless steel stub shaft to fit either 5/8" or 7/8" driver shaft; viton mechanical seal.   Pump water end only less motors. Motors Required: 1-1/2 HP, 2 HP or 3 HP TEFC, 3450 rpm, single phase or three phase, 60 Hz Motor Frames Required: 184C/145TC NEMA motors with feet.

Roper Pump 2835M High Viscous Pump W/Rv Roper's 2835 rotary pump is built for pumping highly viscous, molasses-based liquid feed supplements.  

Roper Pump N34-97 Seal Kit Buna

Roper Pump 3611HB 2" Gear Pump Bronze Bearings N/Rv Roper 3611HB Gear Pump   2″ NPT Standard Fitted with Graphite Packing and Bronze Bushings   Ships via Truck

Roper Pump 3611HBRV 2" Gear Pump Bronze Brgs Roper 3611HBRV Gear Pump   2″ NPT with Relief Valve Standard Fitted with Graphite Packing and Bronze Bushings   Ships Via Truck

Roper Pump 3617HBRV 2" Gear Pump Bronze Bearings Rv Roper 3617HBRV Gear Pump   2″ NPT Flanged Ports with Relief Valve Standard Fitted with Graphite Packing and Bronze Bushings   Ships Via Truck

Roper Pump 3622HBFRV 3" Gear Pump Bronze Bearings Rv Roper 3622HBFRV Spec: 10137 Steam Jacketed Gear Pump   3″ NPT Flanged Ports Aluminum Gaskets Heavy Duty Cast Iron Helical Gear Pump Internal Relief Valve Bushings and Sealing Options Available Outboard Ball Bearing   Ships Via Truck

Roper Pump 3658HBFRV 4" Gear Pump Packed Box Roper 3658HBFRV Gear Pump   4″ NPT Flanged Ports Heavy Duty Cast Iron Helical Gear Pump Internal Relief Valve Steam Jacketing, Bushings and Sealing Options Outboard Ball Bearing   Ships Via Truck only ask us for a shipping quote at the Contact Us page. Please provide City,State and Zip Code.

Roper Pump 3611GHBORV 2" Gear Pump Bronze Bearings Rev Ships via Truck

Roper Pump 3617GHBORV 2" Gear Pump Bronze Bearings Ships Via Truck

Roper Pump 3622GHBFORV 3" Gear Pump Bronze Bearings Rv ships via Truck

MP Pumps 25979 FM5-CI-56C PUMP   Flomax 5 Pumpaks are liquid-ends less power source. They are shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. They are available in cast iron and all bronze construction and will fit 56C NEMA motors less feet.   Specifications Rated Capacity 100 GPM Maximum Discharge Pressure: 40 PSI Suction & Discharge Connections: 1-1/2" X 1-1/2" FNPT Impeller Diameter: Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss weight; 304 stainless steel stub shaft to fit either 5/8" driver shaft; viton mechanical seal. Pump water end only less motors.   Motors Required 1-1/2 HP, 2 HP or 3 HP TEFC, 3450 rpm, single phase or three phase, 60 Hz Motor Frames Required 56C NEMA motors less feet   

MP Pumps 26074 Flomax 5 C/I MT 7/8"   Flomax 5 Pumpaks are liquid-ends less power source. They are shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. They are available in cast iron and all bronze construction and will fit 184C/145TC NEMA motors with feet.     Specifications Rated Capacity 100 GPM Maximum Discharge Pressure: 40 PSI Suction & Discharge Connections: 1-1/2" X 1-1/2" FNPT Impeller Diameter: Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 stainless steel stub shaft to fit either 5/8" or 7/8" driver shaft; viton mechanical seal.   Pump water end only less motors Motors Required 1-1/2 HP, 2 HP or 3 HP TEFC, 3450 rpm, single phase or three phase, 60 Hz Motor Frames Required 56C NEMA motors less fit or 184C/145TC NEMA motors with feet.