Replacement Gravity Purifier 6.5 The RapidPure® Replacement Gravity Purifier is easy to install and allows you to keep using your RapidPure® Gravity System for years to come.  Compatible with: RapidPure® 9L Gravity System 0160-0142 Features: Easy to install a replacement for the RapidPure 9L Gravity System. Virus protection - treats water for viruses, bacteria, parasites, and more with UltraCeram® technology  Use Anywhere - convenient for freezing temperatures.  The updated design extends the cartridge lifespan to 200 gallons so you’re always prepared Faster flow rates - OpenPore Technology uses adsorption (natural magnetic attraction) combined with larger pore sizes for easy drinking  In the Box: RapidPure Purifier 6.5 Instruction manual  *Sold as an Individual

9L Gravity System   Great for groups and camping, the RapidPure® Purifier + 9L Gravity System gives you the power to filter and purify water a large volume of water quickly and easily.   Adventure Medical simplified water purification with the POD system and UltraCeram® purification technology.  RapidPure® purifiers combine OpenPore technology for fast flow rates with adsorption (natural magnetic attraction) to remove viruses, bacteria, parasites, sediment, and more.  The updated POD purification design has an extended lifespan – to 200 gallons – and continues to work after being frozen for peace of mind if the temperatures suddenly drop.  Simply fill the 9L gravity system for purified water without batteries, pumping, priming, or special maintenance.  Features: Easy to Use - Simply fill and drink for purified water – no waiting, pressing, squeezing, priming, or back-flushing required Virus Protection - Treats water for viruses, bacteria, parasites, and more with UltraCeram® technology Faster Flow Rates - OpenPore technology uses adsorption (natural magnetic attraction) combined with larger pore sizes for easy drinking Use Anywhere - A purifier can be used after being frozen. The POD system has extended the cartridge lifespan to 75 gallons Great-Tasting Water - Activated carbons instantly remove odors and improve the taste In the Box: 9L bag for water Hose 6.5" Purifier cartridge 0160-0161  *Sold as an Individual

AMT Pump MSV3-5-1P Multistage Mtr/Pmp 1Hp 115v Multi-Stage Booster Pump – MSV3-5-1P, 5-Stage, 115-208-230 Volts NEMA 56C, Dual Cycle 50 and 60 Hz, 1.0 HP, single phase, Totally Enclosed, Fan Cooled motor Recommended to operate at or below the Best Efficient Point which is at 16 GPM and a Max Total Head of 105 feet Cast Iron base and adapter 1 inch NPT cast iron flanges 304 series stainless steel components with Teflon wear rings EPDM-Tungsten Carbide Seal that is easy to remove and replace The AMT MSV3-5-1P is a non-self-priming/gravity feed, industrial pump with high pressure and low output.  This unit is more commonly referred to as a jockey pump and is often installed for water transfer uses where no suction lift is required such as boiler feed, condensate return, high pressure washdown, irrigation, booster service, and fire protection/sprinkler systems.  These pumps have NOT been investigated for use in drinking water systems.  

6018-R Phase III VHF Antenna - 17′ 6″ (5.3M) VHF Marine Band 9dB Gain  Good communication over the VHF Marine Band depends on antenna height, quality and dB Gain. This high performing Phase III™ marine antenna is a powerhouse providing all of those necessities in our rugged, high-strength, foam-filled fiberglass radome for stability in high seas, high winds and high speeds. Features: Silver-plated outer conductor, copper inner conductor • Stainless steel mounting sleeve • Type SO-239 connector inside mounting sleeve for easy mounting and dismounting for stowage • Suggested mount: Shakespeare® Style 409-R or 410-R Mounting Kit • Two sections: Base 110″, Tip 110″ Specifications: Design: Collinear-phased 1/2-wave elements with choking sleeve  Height: 18' (5.48m) Weight: 20lbs (9kg) Gain: 8dB Connector Type: SO-239 Suggested Mounting: 409-R or 410-R Impedance: 50 ohms Max Input Power: 150W DC Grounding: No Shakespeare Limited Warranty: 8 years

R Series 6.5” Marine Speaker - Anthracite Grille - 60W RMS & 120W Peak Power The Roswell R Series 6.5" bridges the gap in the arsenal of sound to deliver a speaker that kicks down the door of versatility. Created to pump the party in any application on the road and beyond, the R 6.5" will never leave you hanging with Roswell innovation that inspires everyone to #GetLoud. Integrated RGB LEDs light it up to give you the option to set your mood with a RGB controller (sold separately). No matter how you like to get down, this speaker was created for you. Features: 6.5" component-style speaker Integrated RGB LED backlit grille helps to create your desired visual atmosphere Klippel® tested and certified to guarantee acoustic performance Injection-molded plastic with UV inhibitors for marine durability Concealed integrated 6 dB/OCT crossover network Deutsch wiring harness included for water-tight connection Saltwater and UV resistance Specifications: Color: Anthracite Grille Continuous Power (RMS): 60 Watts Peak Power (RMS): 120 Watts Sensitivity: 87 dB @ 1W/1M Frequency Response (+ / - 3 dB): 69Hz - 20kHz Impedance Ω: 4Ω Dimensions: Nominal Diameter: 6.5 in. I 16.51 cm Overall Diameter: 6.81 in. I 17.3 cm  Basket Diameter: 5.25 in. I 13.35 cm Mounting Depth: 3 in. I 7.60 cm Grill Height: 1.2 in. I 3 cm *Sold as a Pair

R 6.5" Marine Audio Package with RGB Remote & Controller - Anthracite Grill When it’s time to #GetLoud and you’re starting from scratch, the Roswell R 6.5" Marine Audio Package comes ready to rock with every piece of the puzzle. Trade trips to the store for cruises to the sandbar with this all-in-one audio solution, including Roswell's R 6.5" in boat speakers, RGB controller, R1 650.4 amp, Cybox Bluetooth Controller, Dual Zone Volume Control, and every accessory boaters need to get on the water. Features: Anthracite grill color Includes: (2 pair) R 6.5" Marine Speakers     (2) 2M 2 Channel RCA cable (1)  R1 650.4 Amplifier     (1) Dual Zone Volume Control (1)  Cybox Bluetooth Controller     (1) RGB Remote & Controller

R 6.5” Tower Speakers - Anthracite Grille - 60W RMS & 120W Peak Power The R 6.5" Tower Speakers bring your Roswell experience behind the boat in style. Ready to rise to any occasion, these speakers will never let you down when it’s time to turn up. When the light gets low, integrated RGB LEDs give the option to set your mood on the fly with our RGB controller (sold separately). If the crew never quits, embrace the moment and prepare to be heard. Features: Coaxially ­mounted 3/4" silk dome tweeter 6.5" component-style speakers    Concealed integrated 6 dB/oct crossover network Integrated RGB LED backlight the cone to create your desired visual atmosphere   Machined billet Roswell 360º 3" Universal Clamp with 1.90", 2.375, and 3" adapters Klippel® tested and certified to guarantee acoustic performance     Injection-molded plastic with UV inhibitors for marine durability Deutsch wiring harness included for water-tight connection Extreme marine durability Specifications: Color: Anthracite Grille Continuous Power (RMS): 60 Watts Peak Power (RMS): 120 Watts Sensitivity: 87 dB @ 1W/1M Frequency Response (+ / - 3 dB): 69Hz - 20kHz Impedance Ω: 4Ω Dimensions: Nominal Diameter: 6.5 in. I 16.51 cm Overall Diameter: 6.975 in. I 17.7 cm  Total Depth: 8.60 in. I 21.96 cm Hanging Distance (from center to lowest point):  9.69 in. I 24.61 cm *Sold as a Pair

PP4500 PowerPod Uncut (Usable Face = 10.75"W x 6.5"H) (27.3cm W x 16.5cm H) PowerPods are designed for the serious boater who is blasting offshore. He demands the most from his boat and his electronics. He needs a tough and rugged mount to protect vital electronics from the harshest of offshore boating conditions. Sturdy and secure, yet clean and attractive, PowerPods are better than bracket mounting. Over 70 Pre-Cut PowerPods are available for all popular manufacturers products. 1.8" opening in the swivel tube provides plenty of room for running wires and connectors through. PowerPods are positioned at a 20 degree tilt back veiwing angle. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. Structural Rigidity The Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it's potentially damaging effects on plastic. These NavPods are really strong! Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel NavPod uses all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! Commitment to Quality We are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty.

PP4500 PowerPod Uncut (Usable Face = 10.75"W x 6.5"H) (27.3cm W x 16.5cm H) - Carbon Black PowerPods are designed for the serious boater who is blasting offshore. He demands the most from his boat and his electronics. He needs a tough and rugged mount to protect vital electronics from the harshest of offshore boating conditions. Sturdy and secure, yet clean and attractive, PowerPods are better than bracket mounting. Over 70 Pre-Cut PowerPods are available for all popular manufacturers products. 1.8" opening in the swivel tube provides plenty of room for running wires and connectors through. PowerPods are positioned at a 20 degree tilt back veiwing angle. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. Structural Rigidity The Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it's potentially damaging effects on plastic. These NavPods are really strong! Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel NavPod uses all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! Commitment to Quality We are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty.

PED4500 PedestalPod Uncut (Usable Face = 10.75"W x 6.5"H) (23.7cm W x 16.5cm H) - Carbon Black PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your fishfinder/chartplotter from the harshest of wet boating conditions. PedestalPods provide the convenience of easily reaching and controlling the fishfinder/chartplotter while providing added security with protection from theft. PedestalPods position your fishfinder/chartplotter at 20" off the deck and located near the bow and at the 45° angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor. PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal keeping spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics. Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look and provides protection for wires and electrical connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets. NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. There are pre-cut models available for 7", 9" and 12" LCD displays from all major marine electronic manufacturers.

Replacement Portlight Lens Only - 5" x 12" - Smoke Replacement lens only for Beckson Opening Ports Features: 5" x 12" Smoke

EZ-Roll’r™ Cradle for the Apple iPad Pro 10.5 The RAM® Mounts EZ-Roll’r™ cradle for the iPad Pro 10.5 secures your device in a form-fit holder that keeps the entire screen visible. Simply slide your iPad into the bottom cups and then roll the top clip over the top of the device to anchor it into the cradle. The side buttons, camera and charging port are conveniently exposed and accessible. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. Features: Compatible with various iPad cable/docking accessories Patented roller design for super smooth placement and removal of the iPad Pro High strength materials maximize longevity of cradle Full access to all ports Lifetime warranty Made in U.S.A. Material: High Strength Composite Note: This product is NOT recommended for devices with a Tech Armor Glass Screen Protector. The "U" in the part number reflects product packaged in poly bag.

ROKK Apple Lightning USB Cable - 6.5' (1.98 M) Designed and engineered by the outdoor technologies experts, the ROKK cables are the ultimate rugged outdoor USB charge/sync cable range.  Perfect for all outdoor environments and activities including boating, sailing, camping and adventuring.  The cable is compatible with cases from leading manufacturers.   Officially approved by Apple for use with iPhone, iPad and iPod. Built with a high-spec core that ensures super fast charge/ sync whatever the application or environment. Features: Built to withstand all the elements and long lasting Super fast charge/sync MFi Approved C48 chip Technical Specifications: Cable length - 6.5' (1.98 M) Cable diameter - .14" (3.8mm) Material -  Thermoplastic elastomer  (TPE) Connectors - USB Type A Male and Apple Lighting  *Sold as an Individual

ROKK Micro USB Cable - 6.5' (1.98 M) Designed and engineered by the outdoor technologies experts, the ROKK cables are the ultimate rugged outdoor USB charge/sync cable range.  Perfect for all outdoor environments and activities including boating, sailing, camping and adventuring.  The cable is compatible with cases from leading manufacturers.   Built with a high-spec core that ensures super fast charge/ sync whatever the application or environment. Features: Built to withstand all the elements and long lasting Super fast charge/sync MFi Approved C48 chip Technical Specifications: Cable length - 6.5' (1.98 M) Cable diameter - .14" (3.8mm) Material -  Thermoplastic elastomer  (TPE) Connectors - USB Type A Male and USB Type B Micro Male *Sold as an Individual

Galaxy 6.5' Broadband Antenna 6.5 ft. Broadband 136-174 MHz Broadband The HS 2774-1 is a highly sophisticated antenna with performance maximized from 136 to 174 MHz. It will handle continuous duty at maximum input power. The self-supporting antenna is designed for military, commercial, law enforcement, and disaster preparedness. No tuning or ground plane required. Features: and soldered brass elements for maximum range and efficiency Stainless steel ferrules, standard 1in-14 threads Includes 20 feet of RG-8/X low-loss cable plus a PL-259 connector Suggested mount: Use only Shakespeare Style 4187-HD for self-supporting applications. Use a Style 410-R if an upper support bracket installation is preferred. Covers: 136-174 MHz One section Includes FME Cables