|
Flat Foot Recessed Tray for Minn Kota Foot Pedals
This recessed tray for your foot petal control reduces back pain due to better posture. It also increases safety due to less obstacles to trip over. Durable 1/8" aluminum tray with a baked on black crinkle powder coat finish. Includes drain line, clamp, stainless steel screws, cutting template and installation instructions.
|
154.36 |
|
|
Flat Foot Recessed Tray for Wireless Foot Pedals - Minn Kota or MotorGuide
This low profile recessed pan is specifically designed for the Minn Kota and MotorGuide Wireless Foot Pedal Control. It is made of durable 1/8" aluminum with a baked on black crinkle powder coat finish. Includes drain line, clamp, stainless steel screws, cutting template and installation instructions.
Inside measurements: 15-1/4"L X 11-3/4"W X 1-5/8"H.
|
154.36 |
|
|
Flat Foot Recessed Tray for MotorGuide Foot Pedals
This recessed tray for your foot petal control reduces back pain due to better posture. It also increases safety due to less obstacles to trip over. Durable 1/8" aluminum tray with a baked on black crinkle powder coat finish. Includes drain line, clamp, stainless steel screws, cutting template and installation instructions.
|
154.36 |
|
|
G-Force ELIMINATOR Trolling Motor Black Prop Nut f/Minn Kota 80-101-112 Trolling Motor
One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.
Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.
Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.
Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.
Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
53.99 |
|
|
Raptor Bundle Pair - 8' Silver Shallow Water Anchors with Footswitch
Bundle Includes:
(2) Minn Kota Raptor 8' Shallow Water Anchor - Silver
(1) Minn Kota Raptor Wireless Footswitch – Bluetooth
Minn Kota Raptor 8' Shallow Water Anchor – Silver
The Raptor keeps working to hold users more reliably than any other anchor, especially in rough conditions. Designed with increased retraction force, Raptor’s spike pulls free from mud, sand, and rock every time. Legendary Minn Kota's durability and innovative anchoring technology make Raptor the only hydraulic anchor that can call itself relentless.
Features:
Durable Design: A wider profile, heavy-duty reinforced pivot points, and extruded aluminum design will keep Raptor on the water in the harshest conditions
Retraction Force: We designed Raptor with increased retraction force to ensure spike removal in all bottom types
Multiple Control Options: Control Raptor from anywhere on the boat using your choice of options: wireless remote, foot switch, i-Pilot or i-Pilot Link remote, mobile app, or right from the Humminbird fish finder
User-Selectable Anchoring Modes: Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), and Standard (normal anchoring)
Indestructible Anchoring Spike: A strong and flexible composite anchor spike backed by a lifetime guarantee
Auto Up/Down: Automatically deploy or retract your Raptor with the push of a button; no need to hold the button down
Saltwater-Tough Engineering: Keeps Raptor safe from the corrosive effects of saltwater
Other Features:
Wireless remote
15' hydraulic hoses
Specifications:
Product Weight: 41 lb.
Anchoring Depth: 8 ft.
Product Dimensions: 12 in x 4.75 in x 58 in
Operation: Hydraulic
Deployment: Four-Bar Articulating Arm
Minn Kota Raptor Wireless Footswitch – Bluetooth
Raptor wireless foot switch allows for hands-free control of your Raptor. Control one or two Raptors independently or simultaneously. The foot switch is waterproof, includes LED indicator lights, and has an easy-access battery compartment.
Features:
Enable or disable active Anchoring
Anchor mode selection of Auto-Bottom, Standard, Rough Water, or Soft Bottom
Change deployment and retraction speed
Selection and control of single or dual Raptors
LED display of anchor mode for single or dual Raptors
Modular deck mount for easy removal and storage
Automatic up/down
Waterproof and floats
Battery included
|
3717.99 |
|
|
Raptor Bundle Pair - 8' Black Shallow Water Anchors with Footswitch
Bundle Includes:
(2) Minn Kota Raptor 8' Shallow Water Anchor - Black
(1) Minn Kota Raptor Wireless Footswitch – Bluetooth
Minn Kota Raptor 8' Shallow Water Anchor – Black
The Raptor keeps working to hold users more reliably than any other anchor, especially in rough conditions. Designed with increased retraction force, Raptor’s spike pulls free from mud, sand, and rock every time. Legendary Minn Kota's durability and innovative anchoring technology make Raptor the only hydraulic anchor that can call itself relentless.
Features:
Durable Design: A wider profile, heavy-duty reinforced pivot points, and extruded aluminum design will keep Raptor on the water in the harshest conditions
Retraction Force: We designed Raptor with increased retraction force to ensure spike removal in all bottom types
Multiple Control Options: Control Raptor from anywhere on the boat using your choice of options: wireless remote, foot switch, i-Pilot or i-Pilot Link remote, mobile app, or right from the Humminbird fish finder
User-Selectable Anchoring Modes: Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), and Standard (normal anchoring)
Indestructible Anchoring Spike: A strong and flexible composite anchor spike backed by a lifetime guarantee
Auto Up/Down: Automatically deploy or retract your Raptor with the push of a button; no need to hold the button down
Saltwater-Tough Engineering: Keeps Raptor safe from the corrosive effects of saltwater
Other Features:
Wireless remote
15' hydraulic hoses
Specifications:
Product Weight: 41 lb.
Anchoring Depth: 8 ft.
Product Dimensions: 12 in x 4.75 in x 58 in
Operation: Hydraulic
Deployment: Four-Bar Articulating Arm
Minn Kota Raptor Wireless Footswitch – Bluetooth
Raptor wireless foot switch allows for hands-free control of your Raptor. Control one or two Raptors independently or simultaneously. The foot switch is waterproof, includes LED indicator lights, and has an easy-access battery compartment.
Features:
Enable or disable active Anchoring
Anchor mode selection of Auto-Bottom, Standard, Rough Water, or Soft Bottom
Change deployment and retraction speed
Selection and control of single or dual Raptors
LED display of anchor mode for single or dual Raptors
Modular deck mount for easy removal and storage
Automatic up/down
Waterproof and floats
Battery included
|
3717.99 |
|
|
20" Straight Trolling Motor Plate for Minn Kota’s Quest
The Sea Brackets 20" Straight Trolling Motor Mounting Plate, designed for the Minn Kota’s RTA-55 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Minn Kota’s RTA-55 Quick Release Bracket
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
3/8–16 Flat-head Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
217.50 |
|
|
Trolling Motor Mount for MK, Garmin, Rhodan, & Power Pole
The Sea Swivel is a heavy-duty marine-grade pivoting bracket designed to maneuver a trolling motor in the correct position while being deployed. This bracket also has the benefit of being able to adjust the stowed position to match the angle of any boat. That means no more anchor hatches covered up and no more trolling motorheads hanging off the side of the boat. All that is needed is an 8" x 8" flat mounting surface and access under the gunwale to tighten the nut. During installation, it is recommended that users apply teff-gel or marine-grade grease to the main bolt threads and the bearing assembly.
Features:
Maneuverability and Positioning
The Sea Swivel offers a heavy-duty pivoting bracket that allows users to easily maneuver the trolling motor into the correct position while deployed. This is especially useful for maintaining proper control and direction while fishing or navigating in different conditions.
Adjustable Stowed Position
The ability to adjust the stowed position of the trolling motor to match the angle of the boat is a significant advantage. This means that the trolling motor won't interfere with anchor hatches or hang off the side of the boat when not in use, enhancing the boat's aesthetics and functionality.
High-Quality Materials
The use of 7075T6 aluminum alloy, commonly found in the aerospace industry, provides peak strength and ensures the Sea Swivel's durability. This material choice suggests that the product is designed to withstand the rigors of marine environments and provide longevity.
Corrosion Resistance
The anodized finish is designed to protect the Sea Swivel from the harsh marine environment, which typically includes exposure to saltwater and other corrosive elements. This coating enhances the product's ability to resist rust and other forms of corrosion over time.
Stainless Lock Pin and Hardware
The utilization of all 316 stainless lock pins and mounting hardware further enhances the product's resistance to corrosion, as 316 stainless steel is known for its exceptional corrosion resistance properties, making it well-suited for marine applications.
Backing Plate for Strength
The inclusion of a pre-cut backing plate to be placed under the mounting surface is a smart design choice. This additional plate strengthens the installation area, reducing the risk of damage or failure due to stress or strain over time.
Easy Installation
The patent-pending design and single-bolt mounting system contribute to streamlined installation processes. This can be a significant selling point for customers, as it saves time and effort during setup.
*It is recommended that users apply teff-gel or marine-grade grease to the main bolt threads and the bearing assembly.
Compatibility
The Sea Swivel stands out as a versatile solution seamlessly accommodating many makes, models, and sizes of trolling motors. It makes installation a breeze and comes pre-drilled for the quick-release brackets listed below:
Minn Kota RTA 54/62 (fits all 36V permanent magnet motors)
Minn Kota RTA 55/56 (fits all new Brushless/Quest motors)
Minn Kota RTA17 (fits all 24V motors for smaller units)
Also fits quick-release mounts for the *Garmin Kraken 24v/36v
Rhodan large mount 6 bolt 36v 96/108
Rhodan smaller mount 4 bolt 24v
Power Pole Move PV 36V/24V
Lifetime Warranty
Sea Swivel offers a limited lifetime warranty.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1318.80 |
|
|
Large Offset Trolling Motor Plate for Minn Kota’s Quest
The Sea Brackets Large Offset Trolling Motor Mounting Plate, designed for Minn Kota’s RTA-55 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Minn Kota’s RTA-55 Quick Release Bracket
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 tapered Phillips machine screws, fender washers, and lock nuts
3/8–16 Flathead Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
405.00 |
|
|
G-Force ELIMINATOR Trolling Motor Blue Prop Nut for Minn Kota 80-101-112 Trolling Motor
One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.
Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.
Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.
Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.
Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
52.81 |
|
|
G-Force ELIMINATOR Trolling Motor Clear/Silver Prop Nut for Minn Kota 80-101-112 Trolling Motor
One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.
Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.
Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.
Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.
Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
52.81 |
|
|
G-Force ELIMINATOR Trolling Motor Red Prop Nut for Minn Kota 80-101-112 Trolling Motor
One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.
Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.
Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.
Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.
Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
53.99 |
|
|
G-Force ELIMINATOR Trolling Motor Black Prop Nut for Minn Kota 35-70 Trolling Motor
One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.
Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.
Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.
Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.
Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
52.81 |
|
|
G-Force ELIMINATOR Trolling Motor Blue Prop Nut for Minn Kota 35-70 Trolling Motor
One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.
Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.
Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.
Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.
Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
52.81 |
|
|
G-Force ELIMINATOR Trolling Motor Clear/Silver Prop Nut for Minn Kota 35-70 Trolling Motor
One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.
Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.
Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.
Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.
Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
53.99 |
|