Clear Start™ Race Timer - 65mm(2-9/16") - Black/White Innovative Race Functions with Bold Styling The most popular sailing watch in the world just got better. Ronstan's Clear Start™ race timer is completely updated with bold styling and true sailing functionality. Besides the fresh look they feature large buttons, easy to read displays and advanced intuitive programming designed specifically with the racing sailor in mind. Developed with input from some of the world's top sailors, Clear Start™ watches and timers are sure to set the standard for years to come. If you're looking for a simple competitive edge, the difference is Clear Start™. Large Quick View Displays The entire Clear Start™ range features oversized digit displays for easy viewing. The Race Timer presents huge 16mm (5/8") numbers that can be easily viewed by the crew when mounted to the boom or mast base. Race Sequence Resynchronisation All racing sailors know how hard it can be to get the watch going at the exact second the start sequence is commenced. With the handy SYNC function, you can quickly resynchronise the Clear Start™ to the official race time. A simple press of a button allows you to drop down to the next minute, allowing you to get your starting sequence back in perfect SYNC at the next opportunity. Pre-programed Race Sequence Sounds The intuitive Clear Start™ sound signals let you know exactly where you are in the start sequence without looking at the display. Pre-programmed with ISAF 5-4-1-0 and Match Racing start sequences, it can also be programmed for other countdown sequences by the user. Sound signals can be turned off if desired. End of Sequence - Countdown or Count Up Depending on the user's preference, the watch can be set up to auto repeat the countdown at the end of the sequence for general recall restarts, or to start counting up to track elapsed time. Bold and Functional Styling Redesigned for a new generation, the Clear Start™ range offers clean modern styling without sacrificing usability. Available in three attractive color combinations that can be worn anywhere, the versatile large faced Race Timer can be worn as a watch or mounted remotely for easy viewing by the entire crew. Daily Life Functionality From waking up for work to working out, the Clear Start™ range is also great for everyday activities. Standard modes include 12 or 24 hour time format, date in day/month or month/day format, daily alarm and chronograph (stop watch). Luminescent Backlight Bright, full-face electroluminescent backlighting is easy to read at night and can be turned on temporarily for a quick view. Water and Shock Resistant Designed to survive the rigours of competitive sailing, Clear Start™ watches and timers are water resistant to up to 50M (150') and highly shock resistant. Features: Specialist RACE MODE Features including: Multiple Start Sequence options - ISAF 5,4,1,0, Match Racing, User Set SYNChronisation function - auto-correction if you start the coundown early or late Multi-line display - Start Sequences + Time Loud intiutive lead-up and start sound signals Countdown repeat or Countdown and up options (for elapsed race time) Separate fast access Race and Time mode scrolling Water resistant to 5 ATM (50M/150') - double gasket seals STANDARD Features including: Time, hours/minutes/seconds - 12 or 24hr format Month/Day or Day/Month format Daily alarm Chronograph - Including hours and time of the day Luminescent backlight Battery saving mode - light can be turned off Shock resistant Large 65mm (2 9/16") diameter face Oversized 16mm (5/8") digit display Rotating face Wrist/Hull/Mast/Boom mount options 30mm (1 1/18") wide stretch Nylon band with security loop Easy-use, flush fit buckle Dual batteries Extra-large easy-press silicon buttons - highlighted Start/Stop button This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Impeller Removal Tool 1-9/16" to 2-9/16" (40mm - 65mm) Features: Simple to use Fits ALL makes of impeller Avoids damage to pump All Stainless Steel WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Impeller Removal Tool 2-9/16" to 4-5/8" (65mm - 118mm) Features: Simple to use Fits ALL makes of impeller Avoids damage to pump All Stainless Steel WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Webbing Eye strap - 5mm Diameter - 13/64" - 65mm Spacing - 2-9/16" Features: Drop-forged webbing eye straps with high-quality stainless steel (316L) Outstanding strength Specific use for webbing Applications: The perfect solution to attach webbing Specifications: Materials: 316L stainless steel grade Weight: (lb) 0.029 / (lb) 0.029  Dimensions: A: (inch) 1 11/32" / (mm) 34  B: (inch) 25/64" / (mm) 10  D diameter: (inch) 13/64" / (mm) 5  E: (inch) 2 9/16" / (mm) 65  Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual

Twisted Shackle - 1/2" Pin - 2-9/16"L x 3/4"W Features: High strength to weight ratio Grade 316 Stainless Steel bodies and pins Drilled shackle pin for siezing wire

Cockpit Marine 52MM (2-1/16") Voltmeter - White Dial/Chrome Bezel VDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability.  As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform. VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price and performance ratio. Features: 8 to 16 V Range For 12V electrical systems Mounting Hardware Included *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Impeller Kit Material:Neoprene Drive Type:Spline Drive Number of Blades:10 Dimensions: Diameter:2-9/16" Shaft Width:&#8541" Shaft Diameter:2" Insert Material:Brass Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance. Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces. Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Impeller Kit - 8 Blade - Neoprene - 2-9/16" Diameter x 3" W, 5/8" Shaft Diameter Features: Material: Neoprene Drive Type: Spline Drive Number of Blades: 8 Dimensions: Diameter: 2-9/16", Shaft Width: 3", Shaft Diameter: 5/8" Insert Material: Brass Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance. Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces. Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Impeller Kit Material:Neoprene Drive Type:Key Drive Number of Blades:12 Dimensions: Diameter:2-9/16" Shaft Width:5/8" Shaft Diameter:1-5/8" Insert Material:Brass Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance. Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces. Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Impeller Kit - 8 Blade - Nitrile - 2-9/16" Diameter - Ding Drive Material: Nitrile Drive Type: Ding Drive - Keyway Number of Blades: 8 Dimensions: Diameter: 2-9/16" Shaft Width: 5/8" Shaft Diameter: 2" Insert Material: Brass Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance. Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces. Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Impeller Kit - 8 Blade - Nitrile - 2-9/16" Diameter - Spline Drive Material: Nitrile Drive Type: Single Flat Drive Number of Blades: 8 Dimensions: Diameter: 2-9/16" Shaft Width: 5/8" Shaft Diameter: 2" Insert Material: Brass Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance. Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces. Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Impeller Kit - 8 Blade - Neoprene - 2-9/16" Diameter x 2" W, 5/8" Shaft Diameter Features: Material: Neoprene Drive Type: Spline Drive Number of Blades: 8 Dimensions: Diameter: 2-9/16", Shaft Width: 2", Shaft Diameter: 5/8" Insert Material: Brass Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance. Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces. Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (2" - 2-9/16") Clamping Range - 10-Pack - SAE Size 32 Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.   Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 32 Hose Inner Diameter: (inch) 1-3/4" - 2" Clamping Range: (inch) 2" - 2-9/16" / (mm) 50-65 Recommended Torque Inch lbs: 45-60

ClearStart™ 40mm Sailing Watch- Black Innovative Race Functions with Bold Styling The most popular sailing watch in the world just got better. Ronstan's Clear Start™ race timer and watches are completely updated with bold styling and true sailing functionality. Besides the fresh look they feature large buttons, easy to read displays and advanced intuitive programming designed specifically with the racing sailor in mind. Developed with input from some of the world's top sailors, Clear Start™ watches and timers are sure to set the standard for years to come. If you're looking for a simple competitive edge, the difference is Clear Start™. Large Quick View Displays The entire Clear Start™ range features oversized digit displays for easy viewing. The compact 40mm Sailing Watch has impressive 10mm (3/8”) digits.  Race Sequence Resynchronisation All racing sailors know how hard it can be to get the watch going at the exact second the start sequence is commenced. With the handy SYNC function, you can quickly resynchronise the Clear Start™ to the official race time. A simple press of a button allows you to drop down to the next minute, allowing you to get your starting sequence back in perfect SYNC at the next opportunity. Pre-programmed Race Sequence Sounds The intuitive Clear Start™ sound signals let you know exactly where you are in the start sequence without looking at the display. Pre-programmed with World Sailing 5-4-1-0 and match racing start sequences, it can also be programmed for other countdown sequences by the user. Sound signals can be turned off if desired. End of Sequence - Countdown or Count Up Depending on the user's preference, the watch can be set up to auto repeat the countdown at the end of the sequence for general recall restarts, or to start counting up to track elapsed time. Multi-Line Display with Real Time No need to switch between countdown and time modes because the actual time is displayed below the countdown time on the multi-line ClearStart™ display. Daily Life Functionality From waking up for work to working out, the Clear Start™ range is also great for everyday activities. Standard modes include 12 or 24 hour time format, date in day/month or month/day format, daily alarm and chronograph (stop watch). Luminescent Backlight Bright, full-face electroluminescent backlighting is easy to read at night and can be turned on temporarily for a quick view. Water and Shock Resistant Designed to survive the rigors of competitive sailing, ClearStart™ watches and timers are water resistant rated at 5ATM and highly shock resistant. Watch housings are moulded in rugged fiber reinforced resin, with a resilient and super-comfortable silicon band.  Race Mode: Multiple start sequence options – World Sailing 5,4,1,0, match racing, user set.  SYNChronisation function – resynchronise if you start the countdown late.  Multi-line display – start sequence + time.  Loud intuitive countdown and start sound signals.  Countdown repeat, or count down and up (for elapsed race time).  Separate fast access race and time mode scrolling.  Water resistant to 5 ATM (50m/150ft) Features: Time, hours/minutes/seconds – 12 or 24 hour format.  Month/day or day/month format.  Daily alarm Chronograph - including hours and time of the day.  Luminescent backlight.  Battery saving mode – light can be turned off.  Shock resistant Specifications: Durable, ultra-clear mineral crystal lens.  Comfortable and secure silicon band.  Reinforced polycarbonate case.  40mm (1 9/16”) diameter face.  Oversized 10mm (3/8”) digit display.  Textured easy-find buttons.  Stainless steel buckle with silicon band retainer.  Stainless steel back.  Weight 50g (1.8oz) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

ClearStart™ 40mm Sailing Watch- Red Innovative Race Functions with Bold Styling The most popular sailing watch in the world just got better. Ronstan's Clear Start™ race timer and watches are completely updated with bold styling and true sailing functionality. Besides the fresh look they feature large buttons, easy to read displays and advanced intuitive programming designed specifically with the racing sailor in mind. Developed with input from some of the world's top sailors, Clear Start™ watches and timers are sure to set the standard for years to come. If you're looking for a simple competitive edge, the difference is Clear Start™. Large Quick View Displays The entire Clear Start™ range features oversized digit displays for easy viewing. The compact 40mm Sailing Watch has impressive 10mm (3/8”) digits.  Race Sequence Resynchronisation All racing sailors know how hard it can be to get the watch going at the exact second the start sequence is commenced. With the handy SYNC function, you can quickly resynchronise the Clear Start™ to the official race time. A simple press of a button allows you to drop down to the next minute, allowing you to get your starting sequence back in perfect SYNC at the next opportunity. Pre-programmed Race Sequence Sounds The intuitive Clear Start™ sound signals let you know exactly where you are in the start sequence without looking at the display. Pre-programmed with World Sailing 5-4-1-0 and match racing start sequences, it can also be programmed for other countdown sequences by the user. Sound signals can be turned off if desired. End of Sequence - Countdown or Count Up Depending on the user's preference, the watch can be set up to auto repeat the countdown at the end of the sequence for general recall restarts, or to start counting up to track elapsed time. Multi-Line Display with Real Time No need to switch between countdown and time modes because the actual time is displayed below the countdown time on the multi-line ClearStart™ display. Daily Life Functionality From waking up for work to working out, the Clear Start™ range is also great for everyday activities. Standard modes include 12 or 24 hour time format, date in day/month or month/day format, daily alarm and chronograph (stop watch). Luminescent Backlight Bright, full-face electroluminescent backlighting is easy to read at night and can be turned on temporarily for a quick view. Water and Shock Resistant Designed to survive the rigors of competitive sailing, ClearStart™ watches and timers are water resistant rated at 5ATM and highly shock resistant. Watch housings are moulded in rugged fiber reinforced resin, with a resilient and super-comfortable silicon band.  Race Mode: Multiple start sequence options – World Sailing 5,4,1,0, match racing, user set.  SYNChronisation function – resynchronise if you start the countdown late.  Multi-line display – start sequence + time.  Loud intuitive countdown and start sound signals.  Countdown repeat, or count down and up (for elapsed race time).  Separate fast access race and time mode scrolling.  Water resistant to 5 ATM (50m/150ft) Features: Time, hours/minutes/seconds – 12 or 24 hour format.  Month/day or day/month format.  Daily alarm Chronograph - including hours and time of the day.  Luminescent backlight.  Battery saving mode – light can be turned off.  Shock resistant Specifications: Durable, ultra-clear mineral crystal lens.  Comfortable and secure silicon band.  Reinforced polycarbonate case.  40mm (1 9/16”) diameter face.  Oversized 10mm (3/8”) digit display.  Textured easy-find buttons.  Stainless steel buckle with silicon band retainer.  Stainless steel back.  Weight 50g (1.8oz) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.