ST1000 Plus Tiller Pilot ST1000 Plus tiller autopilot for tiller steered sailing vessels up to 6,600 lbs (3,000 kg) *Note: Always take the fully laden displacement weight of the vessel into account; this is often 20% above the designed displacement. Includes: Instruction Manual Plus Tiller Pilot 12V Socket Tiller Pin  Mounting Socket 

ST2000 Plus Tiller Pilot ST2000 Plus tiller autopilot for tiller steered sailing vessels to 10,000 lbs (4,500 kg) *Note: Always take the fully laden displacement weight of the vessel into account; this is often 20% above the designed displacement. Includes: Instruction Manual Plus Tiller Pilot 12V Socket Tiller Pin (sold in packages of 5) Mounting Socket (sold in packages of 5)

RAYMARINE EV-100 WHEEL PILOT $ave lots of money by using two different discounts, first the Discount code is EV100 enter that when checking out, and then go to our Rebate Page and save another $400.00 in rebates.  This coupon code is good until 04-28-2017         The EV Sensor Core At the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-toinstall housing. Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards. The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks. Features: Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change Flexible installation options. Mount above or below deck Simple SeaTalkng connectivity to the control head and ACU Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays p70 Autopilot Control Head The p70 is a push-button operation controller designed primarily for sailboats. Features: LightHouse user interface is simple and quick to use Wide 160° viewing angles Start up wizard helps you configure the pilot quickly and easily Anti-reflective coating for improved visibility in bright sunlight Low power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer Simple system and group dimming/illumination Support for multiple data sources SeaTalkng/NMEA2000 and SeaTalk1 connectivity (no bridging required) EV-100 Wheel Evolution Autopilot Features: A complete autopilot-in-a-box Evolution Ai for superior performance No calibration required Quick and easy installation Fits most types of sailboat wheels Simple, robust clutch engagement For boats up to 16,500 lbs (7,500 kg) For 12V DC power systems Includes p70 Autopilot Controller Includes: EV-1 Sensor Core p70 Autopilot Control Head ACU-100 Actuator Control Unit Wheel Drive Evolution Cabling Kit EV Unit O-Ring Pack (set of 2) Wall Mounting Bracket    

EV-100 Tiller Evolution Autopilot Features: A complete autopilot-in-a-box Evolution Ai for superior performance No calibration required Quick and easy installation Powerful tiller drive is compact and unobtrusive Used by the world's top single-handed sailors For tiller steered boats up to 13,200 lbs (6,000 kg) For 12V DC power systems Includes p70s Autopilot Controller Includes: EV-1 Sensor Core p70s Autopilot Control Head ACU-100 Actuator Control Unit Tiller Drive Tiller Pin (sold in packages of 5) Mounting Socket (sold in packages of 5) Evolution Cabling Kit EV Unit O-Ring Pack (set of 2) Wall Mounting Bracket The EV Sensor Core At the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-toinstall housing. Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards. The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks. Features: Precision monitoring of heading, pitch, roll, and yaw allowing the =autopilot to evolve instantly as sea conditions and vessel dynamics change Flexible installation options Mount above or below deck Simple SeaTalkng connectivity to the control head and ACU Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays p70 Autopilot Control Head The p70 is a push-button operation controller designed primarily for sailboats. Features: LightHouse user interface is simple and quick to use Wide 160° viewing angles Start up wizard helps you configure the pilot quickly and easily Anti-reflective coating for improved visibility in bright sunlight Low power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer Simple system and group dimming/illumination Support for multiple data sources SeaTalkng/NMEA2000 and SeaTalk1 connectivity (no bridging required) ACU-100 Autopilot Control Unit (ACU) The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type. Evolution Cabling Kit 1 x SeaTalkng Power Cable (0.4m) 1 x SeaTalkng Backbone Cable (5m) 1 x SeaTalkng Spur Cable (0.4m) 1 x SeaTalkng 5-way Connector Block 2 x SeaTalkng T-piece Connector 2 x SeaTalkng Terminator

1" Tiller Bracket f/Tiller Pilots 1" tiller bracket for tiller pilots allows for horizontal mounting of the tiller pilot when the boat's tiller is higher or lower than the fixed end of the tiller drive.

2" Tiller Bracket f/Tiller Pilots 2" tiller bracker for tiller pilots allows for horizontal mounting of the tiller pilot when the boat's tiller is higher or lower than the fixed end of the tiller drive.

3" Tiller Bracket f/Tiller Pilots 3" tiller bracker for tiller pilots allows for horizontal mounting of the tiller pilot when the boat's tiller is higher or lower than the fixed end of the tiller drive.

4" Tiller Bracket f/Tiller Pilots 4" tiller bracket for tiller pilots allows for horizontal mounting of the tiller pilot when the boat's tiller is higher or lower than the fixed end of the tiller drive.

5" Tiller Bracket f/Tiller Pilots 5" tiller bracket for tiller pilots allows for horizontal mounting of the tiller pilot when the boat's tiller is higher or lower than the fixed end of the tiller drive.

3" Pedestal Socket For Tiller Pilots Allows for horizontal mounting of the tiller pilot when the fixed end of the pilot is lower than the tiller arm. Compatible Devices: Tiller Pilots

1.5" Pedestal Socket For Tiller Pilots Allows for horizontal mounting of the tiller pilot when the fixed end of the pilot is lower than the tiller arm.

2" Pedestal Socket For Tiller Pilots Allows for horizontal mounting of the tiller pilot when the fixed end of the pilot is lower than the tiller arm.

2.5" Pedestal Socket For Tiller Pilots Allows for horizontal mounting of the tiller pilot when the fixed end of the pilot is lower than the tiller arm.

3.5" Pedestal Socket For Tiller Pilots Allows for horizontal mounting of the tiller pilot when the fixed end of the pilot is lower than the tiller arm.

6" Pushrod Extension f/Tiller Pilots Extends the length of Raymarine tiller autopilot drive systems to accommodate boats of larger beam. Black, machined aluminum.