|
15 Degree Fixed Standard Rod Holder
This Rupp standard rod holder is made of 316L stainless steel and is the perfect combination of form and function. This rod holder has an exclusive forged end cap that gives unbreakable rod support while providing a finished look polished to a mirror-like finish.
Features:
Forged end cap that gives an unbreakable rod support
Specifications:
Angle: 15-degrees
Material: Stainless steel
Liner: White
|
144.44 |
|
|
0 Degree Fixed Standard Rod Holder
This Rupp standard rod holder is made of 316L stainless steel and is the perfect combination of form and function. This rod holder has an exclusive forged end cap that gives unbreakable rod support while providing a finished look polished to a mirror-like finish.
Features:
Forged end cap that gives an unbreakable rod support
Specifications:
Angle: 0-degrees
Material: Stainless steel
Liner: White
|
144.44 |
|
|
30 Degree Fixed Standard Rod Holder
This Rupp standard rod holder is made of 316L stainless steel and is the perfect combination of form and function. This rod holder has an exclusive forged end cap that gives unbreakable rod support while providing a finished look polished to a mirror-like finish.
Features:
Forged end cap that gives an unbreakable rod support
Specifications:
Angle: 30-degrees
Material: Stainless steel
Liner: White
|
144.44 |
|
|
0 Degree Large Fixed HD Rod Holder
This Rupp heavy-duty rod holder is made of 316L stainless steel and is the perfect combination of form and function, with an exclusive forged end cap that gives unbreakable rod support while providing a finished look and mirror-like finish. Large 4" flange and extra deep for heavy-duty use!
Features:
Forged end cap that gives an unbreakable rod support
Large 4 in. flange
Specifications:
Angle: 0-degrees
Material: Stainless steel
Liner: White
|
168.52 |
|
|
15 Degree Large Fixed HD Rod Holder
This Rupp heavy-duty rod holder is made of 316L stainless steel and is the perfect combination of form and function, with an exclusive forged end cap that gives unbreakable rod support while providing a finished look and mirror-like finish. Large 4" flange and extra deep for heavy-duty use!
Features:
Forged end cap that gives an unbreakable rod support
Large 4 in. flange
Specifications:
Angle: 15-degrees
Material: Stainless steel
Liner: White
|
168.52 |
|
|
30 Degree Large Fixed HD Rod Holder
This Rupp heavy-duty rod holder is made of 316L stainless steel and is the perfect combination of form and function, with an exclusive forged end cap that gives unbreakable rod support while providing a finished look and mirror-like finish. Large 4" flange and extra deep for heavy-duty use!
Features:
Forged end cap that gives an unbreakable rod support
Large 4 in. flange
Specifications:
Angle: 30-degrees
Material: Stainless steel
Liner: White
|
168.52 |
|
|
Large Stainless Steel Bolt-less Rod Holder - 15°
2020 IBEX Innovation Award Winner. This patent-pending rod holder is a game changer! Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required. This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing. Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!
Rupp heavy-duty rod holders are the perfect combination of form and function with an exclusive forged end cap that gives unbreakable rod support while providing a completely finished look and mirror-like finish
These larger diameter rod holders are available at 0° 15° & 30° angles.
To be used with the Large Stainless Steel Backing Plates 10-1476-40.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
151.67 |
|
|
Large Stainless Steel Bolt-less Swivel Rod Holder - 15°
2020 IBEX Innovation Award Winner. This patent-pending SWIVEL rod holder is a game changer! Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required. This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing, as well as our patent-pending locking swivel feature that allows the rod holder to be used in either a fixed or 360° swivel configuration. Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!
Revolvers are the combination of Rupp’s top-quality rod holder with a special Compression Bearing Socket that allows rods to swivel a full 360° - keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.
These larger diameter rod holders are available at 0° 15° & 30° angles.
To be used with the Large Stainless Steel Backing Plates 10-1476-40
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
164.66 |
|
|
15 Degree Standard Swivel Rod Holder
This Rupp standard-size rod holder is made of 316L stainless steel. Durable forged components give heavy-duty performance and are polished to a jewelry-like finish for the finest cockpits.
Rupp swivel rod holders are the combination of a top-quality rod holder with a special compression-bearing socket that allows rods to swivel a full 360°, keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.
Features:
A precision-engineered compression bearing socket gives it a performance edge
Fully adjustable with Delrin bearing surfaces to provide precise control of the swivel action
Specifications:
Angle: 15-degrees
Material: Stainless steel
Liner: White
|
182.96 |
|
|
Large Stainless Steel Bolt-less Rod Holder - 0°
2020 IBEX Innovation Award Winner. This patent-pending rod holder is a game changer! Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required. This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing. Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!
Rupp heavy-duty rod holders are the perfect combination of form and function with an exclusive forged end cap that gives unbreakable rod support while providing a completely finished look and mirror-like finish
These larger diameter rod holders are available at 0° 15° & 30° angles.
To be used with the Large Stainless Steel Backing Plates 10-1476-40.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
168.52 |
|
|
Large Stainless Steel Bolt-less Rod Holder - 30°
2020 IBEX Innovation Award Winner. This patent-pending rod holder is a game changer! Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required. This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing. Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!
Rupp heavy-duty rod holders are the perfect combination of form and function with an exclusive forged end cap that gives unbreakable rod support while providing a completely finished look and mirror-like finish
These larger diameter rod holders are available at 0° 15° & 30° angles.
To be used with the Large Stainless Steel Backing Plates 10-1476-40.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
151.67 |
|
|
Large Stainless Steel Bolt-less Swivel Rod Holder - 0°
2020 IBEX Innovation Award Winner. This patent-pending SWIVEL rod holder is a game changer! Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required. This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing, as well as our patent-pending locking swivel feature that allows the rod holder to be used in either a fixed or 360° swivel configuration. Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!
Revolvers are the combination of Rupp’s top-quality rod holder with a special Compression Bearing Socket that allows rods to swivel a full 360° - keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.
These larger diameter rod holders are available at 0° 15° & 30° angles.
To be used with the Large Stainless Steel Backing Plates 10-1476-40
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
164.66 |
|
|
Large Stainless Steel Bolt-less Swivel Rod Holder - 30°
2020 IBEX Innovation Award Winner. This patent-pending SWIVEL rod holder is a game changer! Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required. This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing, as well as our patent-pending locking swivel feature that allows the rod holder to be used in either a fixed or 360° swivel configuration. Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!
Revolvers are the combination of Rupp’s top-quality rod holder with a special Compression Bearing Socket that allows rods to swivel a full 360° - keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.
These larger diameter rod holders are available at 0° 15° & 30° angles.
To be used with the Large Stainless Steel Backing Plates 10-1476-40
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
164.66 |
|
|
15 Degree Large HD Swivel Rod Holder
This Rupp large rod holder is made of 316L stainless steel. Durable forged components give heavy-duty performance and are polished to a jewelry-like finish for the finest cockpits.
Rupp swivel rod holders are the combination of a top-quality rod holder with a special compression-bearing socket that allows rods to swivel a full 360°, keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.
Features:
A precision-engineered compression bearing socket gives it a performance edge
Fully adjustable with Delrin bearing surfaces to provide precise control of the swivel action
Specifications:
Angle: 15-degrees
Material: Stainless steel
Liner: White
Size: large
|
207.04 |
|
|
Rod Holder - Heavy Duty - 0° - Stainless Steel
The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.
|
129.23 |
|