|
0.3M Daisy Chain Cable for Alpha Displays
Daisy chain up to four Alpha Performance Displays together to create the ultimate data display. Daisy chain cables attach seamlessly to the back of each display.
Features:
0.3-meter Daisy Chain Cable
Suitable for both 7” and 9” Alpha Displays
|
44.99 |
|
|
1M Daisy Chain Cable for Alpha Displays
Daisy chain up to four Alpha Performance Displays together to create the ultimate data display. Daisy chain cables attach seamlessly to the back of each display.
Features:
1-meter Daisy Chain Cable
Suitable for both 7” and 9” Alpha Displays
|
76.69 |
|
|
3M Power Cable for Alpha Displays
Connect the Alpha Performance Display with a single cable for both power and data, meaning fewer cables to run through the mast and the deck.
Features:
3-meter Power & RayNet cable
Suitable for both 7” and 9” Alpha Displays
|
81.80 |
|
|
5M Power Cable for Alpha Displays
Connect the Alpha Performance Display with a single cable for both power and data, meaning fewer cables to run through the mast and the deck.
Features:
5-meter Power & RayNet cable
Suitable for both 7” and 9” Alpha Displays
|
102.26 |
|
|
10M Power Cable for Alpha Displays
Connect the Alpha Performance Display with a single cable for both power and data, meaning fewer cables to run through the mast and the deck.
Features:
10-meter Power & RayNet cable
Suitable for both 7” and 9” Alpha Displays
|
153.40 |
|
|
EasyLink Extension Cable f/ OceanLink Displays
Used to connect the OceanLink EasyLink gauges to OceanLink 4.3" and 7” Displays.
Features:
Length: .3M (1')
Specifically for 7" OceanLink
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
17.77 |
|
|
Power Cable for TZT Displays
Power cable for Furuno's displays.
Compatible with:
TZT9F display
TZTL12F display
TZTL15F display
*Sold as an Individual
|
92.72 |
|
|
NMEA 2000® Backbone/Drop Cable - 1' (0.3M) - *Case of 10*
Extend your NMEA 2000® backbone with Garmin's 1' (0.3M) backbone/drop cable.
Compatible Devices:
AIS™ 300/600 Blackbox Transceiver
GBT™ 10
GCL™ 20 Low-light Imaging Camera
GDL™ 40
GET™ 10
GFL™ 10
GFS™ 10
GHP™ 12 Autopilot System
GHP™ 20 Marine Autopilot System for Steer-by-Wire, Viking® and Yamaha® Helm Master™
GHP™ 20 Marine Autopilot System with SmartPump
GMI™ 10/20 Marine Instrument
GPS 19x NMEA 2000®
GPSMAP® Series
VHF 200/300 Marine Radio
VHF 300 AIS
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
209.88 |
|
|
Video Cable for OceanLink® Gauges 0 .3M Length
Video cable 0.3 m for 7" OceanLink®.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
66.38 |
|
|
3M Switch Control Cable for Single Color Hub
This switch control cable is compatible with Metro Marine's single color hub.
|
154.80 |
|
|
RayNet (female) to RJ45 Male Cable - 3m
RayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays.
The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector.
Features:
3m (9.84 ft.)
RayNet to SeaTalkhs (RJ45) cable
|
81.80 |
|
|
Levered Chain Stopper f/5/16" or 8mm Chain
Chain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent accidental free fall of the anchor while under way. Also recommended for VW series rope and chain systems to hold the chain while changing over from rope to chain.
8mm (5/16"):
B - 72mm (2-7/8")
C - 20mm (7/8")
F - 152mm (6")
G - 92mm (3-5/8")
G1 - 30mm (1-3/16")
I - 70mm (2-7/8")
J - 31.5mm (1-1/4")
J1 - 10mm (7/16")
K - 51.5mm (2-1/8")
L - 95mm (3-3/4")
M - M10
|
269.10 |
|
|
Levered Chain Stopper f/3/8" or 10mm Chain
Chain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent accidental free fall of the anchor while under way. Also recommended for VW series rope and chain systems to hold the chain while changing over from rope to chain.
10mm (3/8"):
B - 86mm (3-7/16")
C - 20mm (7/8")
F - 190mm (7-1/2")
G - 130mm (5-1/8")
G1 - 30mm (1-3/16")
I - 86mm (3-1/2")
J - 44mm (1-3/4")
J1 - 10mm (7/16")
K - 64mm (2-5/8")
L - 95mm (3-3/4")
M - M10
|
376.20 |
|
|
Economy Chain Stopper f/5/16", 3/8", 8mm & 10mm Chain
Chain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent accidental free fall of the anchor while under way. Also recommended for VW series rope and chain systems to hold the chain while changing over from rope to chain.
8/10mm (5/16"/3/8"):
B - 62mm (2-3/8")
C - 6mm (1/4")
F - 80mm (3-1/8")
G - 46mm (1-4/4")
G1 - 17mm (5/8")
I - 92mm (3-5/8")
J - N/A
J1 - 37mm (1-1/2")
K - 74mm (2-7/8")
L - N/A
M - M10
|
81.36 |
|
|
SeaTalk Interconnect Cable, 9ft. (3m)
SeaTalk Interconnect cable for linking SeaTalk devices
SeaTalk interconnect cable for linking SeaTalk devices. Flat style, 3-pin
molded connectors on each end.
|
61.36 |
|