Alpha 9 Performance Display Alpha Performance Displays are the most versatile marine data displays. High-bright touchscreen instruments with wide view angles offer excellent visibility from anywhere onboard. Alpha's extensive data dashboard options and widgets make critical sailing, navigation, and engine data easy to interpret at a glance.   Alpha & Axiom Systems  Alpha Performance Displays are companion instruments for Raymarine Axiom chartplotters. A simple RayNet Ethernet cable between Axiom and the Alpha display gives Alpha access to Axiom's connected transducers and NMEA2000/SeaTalk NG devices.  Once paired with an Axiom network, users can customize and configure your Alpha display into a powerful performance sailing, navigation, and engine data instrument. High Visibility  Polarized sunglass-friendly displays with extra wide viewing angles, viewable on the mast or remote location Rugged Build Tested to the extreme and built with our exclusive HydroToughTM nano-coating that repels water and oils for reliable touchscreen control Fully Scaleable  A single power and data cable for fewer cables running through the deck and mast. Support for daisy-chaining up to 4 Alpha displays Tactical Awareness  Intuitively designed graphical instrument displays, aimed at enhancing tactical awareness and facilitating better decision-making on the water. SailPoint™ Target SailPoint™ mode provides you with a visual reference of the target wind angle, so you achieve your maximum VMG upwind or downwind Dynamic Wind The dynamic wind performance display provides automatic zoom to the most critical part of the instrument display based on wind direction. Other Features: 9 in. bright, high contrast sailing instrument display  Power cables sold separately  What’s in the Box: Alpha 9 performance display - 2 x mounting brackets Suncover Waterproof gasket Documentation pack 4 x Threaded studs, M4 x 40 mm 4 x Thumb nuts Physical Specifications: Width: 148.9 mm (5.86 in.) Height: 235.9 mm (9.29 in.) Depth: 34 mm (1.34 in.) Post Separation Distance: 5.71 mm (0.22 in) Weight: 1.18 kg (2.60 lbs) Power Specifications: Nominal Supply Voltage: 12 V / 24 V dc Operating Voltage Range: 10.8 V to 32 V dc Current: 1.02 A (nominal) @ 12 V dc / 0.52 A (nominal) @ 24 V dc Power Consumption: 12 W (maximum) Inline Fuse Rating: 8 A Thermal Breaker Rating: 8 A Network Specifications: Axiom: The Alpha Performance Displays require an Axiom Chartplotter in order to operate. Data Connections: 1 x Daisy-chain connector & 1 x Power / RayNet Ethernet connector Environmental Specifications: Operating Temperature Range: -25°C to +55°C (-13°F to +131°F) Storage Temperature Range: -30°C to +70°C (-22°F to +158°F) Relative Humidity: 93% Max Waterproof Rating: IPx6 and IPx7 Display Specifications:  Display Screen: 9 in. IPS TFT LCD     Brightness / Luminance: 1500 nits / 1500 cd/m2 Viewing Angles: Portrait — 85 + / 85 + & Landscape — 85 + / 85 + Resolution: 1280 (H) x 720 (V) PPI (Pixels Per Inch): 9 in. display — 163 PPI Color: 24-bit color (16.7 million colors) Refresh Rate: 60 Hz Conformance:  Europe, Australia & New Zealand: EN 60945:2002 Canada: ICES-003 USA: CFR47 Part 15 Japan / China: IACS section E10 Product Markings     UKCA, CE, Australian Tick, WEEE Directive, Industry Canada

Alpha 7 Performance Display Alpha Performance Displays are the most versatile marine data displays. High-bright touchscreen instruments with wide view angles offer excellent visibility from anywhere onboard. Alpha's extensive data dashboard options and widgets make critical sailing, navigation, and engine data easy to interpret at a glance.   Alpha & Axiom Systems  Alpha Performance Displays are companion instruments for Raymarine Axiom chartplotters. A simple RayNet Ethernet cable between Axiom and the Alpha display gives Alpha access to Axiom's connected transducers and NMEA2000/SeaTalk NG devices.  Once paired with an Axiom network, users can customize and configure your Alpha display into a powerful performance sailing, navigation, and engine data instrument. High Visibility  Polarized sunglass-friendly displays with extra wide viewing angles, viewable on the mast or remote location Rugged Build Tested to the extreme and built with our exclusive HydroToughTM nano-coating that repels water and oils for reliable touchscreen control Fully Scaleable  A single power and data cable for fewer cables running through the deck and mast. Support for daisy-chaining up to 4 Alpha displays Tactical Awareness  Intuitively designed graphical instrument displays, aimed at enhancing tactical awareness and facilitating better decision-making on the water. SailPoint™ Target SailPoint™ mode provides you with a visual reference of the target wind angle, so you achieve your maximum VMG upwind or downwind Dynamic Wind The dynamic wind performance display provides automatic zoom to the most critical part of the instrument display based on wind direction. Other Features: 7 in. bright, high-contrast sailing instrument display  Power cables sold separately  What’s in the Box: Alpha 7 performance display - 2 x mounting brackets Suncover Waterproof gasket Documentation pack 4 x Threaded studs, M4 x 40 mm 4 x Thumb nuts Physical Specifications: Width: 120.1 mm (4.72 in.) Height: 188.4 mm (7.42 in.) Depth: 32 mm (1.26 in.) Post Separation Distance: 5.71 mm (0.22 in) Weight: 0.72 kg (1.59 lbs) Power Specifications: Nominal Supply Voltage: 12 V / 24 V dc Operating Voltage Range: 10.8 V to 32 V dc Current: 0.84 A (nominal) @ 12 V dc / 0.43 A (nominal) @ 24 V dc Power Consumption: 10 W (maximum) Inline Fuse Rating: 8 A Thermal Breaker Rating: 8 A Network Specifications: Axiom: The Alpha Performance Displays require an Axiom Chartplotter in order to operate. Data Connections: 1 x Daisy-chain connector & 1 x Power / RayNet Ethernet connector Environmental Specifications: Operating Temperature Range: -25°C to +55°C (-13°F to +131°F) Storage Temperature Range: -30°C to +70°C (-22°F to +158°F) Relative Humidity: 93% Max Waterproof Rating: IPx6 and IPx7 Display Specifications:  Display Screen: 7 in. IPS TFT LCD     Brightness / Luminance: 1500 nits / 1500 cd/m2 Viewing Angles: Portrait — 85 + / 85 + & Landscape — 85 + / 85 + Resolution: 1024 (H) x 600 (V) PPI (Pixels Per Inch): 7 in. display — 170 PPI Color: 24-bit color (16.7 million colors) Refresh Rate: 60 Hz Conformance:  Europe, Australia & New Zealand: EN 60945:2002 Canada: ICES-003 USA: CFR47 Part 15 Japan / China: IACS section E10 Product Markings     UKCA, CE, Australian Tick, WEEE Directive, Industry Canada

Alpha 9 Landscape Single Mast Bracket This Alpha Performance Display 9" single mast mounting bracket is lightweight and robust, with aluminum construction for ultimate durability. Features: Brackets can be stacked and joining screws are provided with each bracket Landscape single mast bracket for 9” Alpha display

Alpha 9 Landscape Dual Mast Bracket This Alpha Performance Display 9" dual mast mounting bracket is lightweight and robust, with aluminum construction for ultimate durability. Features: Brackets can be stacked and joining screws are provided with each bracket Landscape dual mast bracket for 9” Alpha display

Alpha 9 Portrait Single Mast Bracket This Alpha Performance Display 9" single mast mounting bracket is lightweight and robust, with aluminum construction for ultimate durability. Features: Brackets can be stacked and joining screws are provided with each bracket Portrait single mast bracket for 9” Alpha display

Alpha 7 Landscape Single Mast Bracket This Alpha Performance Display 7" single mast mounting bracket is lightweight and robust, with aluminum construction for ultimate durability. Features: Brackets can be stacked and joining screws are provided with each bracket Landscape single mast bracket for 7” Alpha display

Alpha 7 Landscape Dual Mast Bracket This Alpha Performance Display 7" dual mast mounting bracket is lightweight and robust, with aluminum construction for ultimate durability. Features: Brackets can be stacked and joining screws are provided with each bracket Landscape dual mast bracket for 7” Alpha display

Alpha 7 Portrait Single Mast Bracket This Alpha Performance Display 7" single mast mounting bracket is lightweight and robust, with aluminum construction for ultimate durability. Features: Brackets can be stacked and joining screws are provided with each bracket Portrait single mast bracket for 7” Alpha display

PP4800-07 PowerPod Pre-Cut for Raymarine AXIOM 9 (Pre-Cut for Surface Mount Using Rear Mounting Brackets, Requires Raymarine Right Angle Connector) PowerPods are designed for the serious boater who is blasting offshore. He demands the most from his boat and his electronics. He needs a tough and rugged mount to protect vital electronics from the harshest of offshore boating conditions. Sturdy and secure, yet clean and attractive, PowerPods are better than bracket mounting. Over 70 Pre-Cut PowerPods are available for all popular manufacturers products. 1.8" opening in the swivel tube provides plenty of room for running wires and connectors through. PowerPods are positioned at a 20 degree tilt back viewing angle. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

SystemPod Pre-Cut f/Raymarine Axiom 9/Axiom+ 9 on Right & 1 Instrument (3.6″ hole) on Left f/12″ Wide Guard (Pre-Cut is for Surface Mount using the rear mounting brackets) SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your fingertips… “Where you need it when you need it.” SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen. A SystemPod is best mounted on a Single Bend AngleGuard. Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style! Commitment to quality: We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

SailPod Pre-Cut f/Raymarine AXIOM 9 f/9.5" Wide Guard (Pre-Cut is for Surface Mount using rear mounting brackets) GP1800 Series for 9.5" Guard, SailPods are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen.  A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. Gen3 Family Features The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. For 2015 we have re-designed and re-tooled all of the popular NavPods. We have reviewed all of the former products and selected the best design elements of each and incorporated them in every new Gen3 product. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

Nemesis™ 9 Sailing Display Nemesis™ 9 is the perfect solution for displaying all the crucial sailing data you need either on the mast, in the cockpit or at the helm station; as a single or as multiple screens via the Nemesis Hub. The super bright touch screen, with adjustable data sizes, palettes and backlight provides outstanding visibility, from wherever you are on the boat and in all conditions. The Nemesis display is also completely customizable; choose from pre-set templates, set up automatic point of sail dashboards or entirely create your own - you can view your trusted sailing data and unique software from your network the way you want to, ensuring you get the most accurate data right in front of you, all the time. The Intelligent Sailing Display This intelligent sailing display offers unparalleled visibility from all angles and distances on-board, and with complete data customization or a choice of easy to use multi-function templates and automatic dashboards based on your point of sail, whether racing or cruising, you will never be out of touch. The Nemesis display allows you to define what data you see, when and how you see it, no matter what the conditions, providing an intuitive link between your trusted instrument network and the real world. Visibility & Versatility A bright touch screen, with super-wide viewing angles and the ability to view with polarized sunglasses at all angles and from any distance on-board, with adjustable data sizes, palettes and backlighting, this display offers optimal viewing in all conditions, whether on the mast or in the cockpit. Complete Customization This all-in-one customizable display can be mounted in both portrait or landscape, whilst the easy to use drag & drop editor allows full customization with a wide choice of graphical gauges, SailSteer™, tank levels, digital data, IP camera views, histograms and images. With this, you have the freedom to select the data, visualization and set size and position that you want, or you can simply choose from a choice of pre-selected built-in B & G dashboards and templates. Additional automatic context modes allow you to choose the sailing data you want to display based on your point of sail or sailing mode: Upwind, Reaching, Downwind, Pre-start or Motoring. Integration The use of commercial grade components, and hours of testing and development by sailors in all conditions, combined with the most accurate sailing data available from your B & G network and instruments, will ensure you can have complete trust in Nemesis. The reliability and accuracy of both the data and the display, will give you the confidence you need to make the right decision, when you need to. Features: Pre-set dashboards or easy to use drag & drop editor for full customization Wide choice of digital data displays including graphical gauges, SailSteer™, tank levels, IP camera views, histograms and images Context modes: Upwind, Reaching, Downwind, Pre-start, Motoring Bright touch screen, with super-wide viewing angles Adjustable palettes and backlight for optimal view in all conditions Mount in portrait and landscape Connect multiple screens via the Nemesis Hub Ethernet and/or NMEA2000

SailPod Pre-Cut for Raymarine AXIOM 9 f/12″ Wide Guard SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it”. Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style! Commitment to Quality - We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

RMX4800-07 RailMount Pre-Cut for Raymarine AXIOM 9  Features: Pre-Cut for Surface Mount Using Rear Mounting Brackets Requires Raymarine Right Angle Connector  Fits 1″ or 1.25″ Tubing

SystemPod Pre-Cut for Raymarine AXIOM 9 & Space for 12″ Wide Guard  SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. “Where you need it…when you need it”. SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen. A SystemPod is best mounted on a Single Bend AngleGuard. Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style! Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.