|
3" Clamp Insert - 2.25" Inner Diameter
This clamp insert is to change the fitting size to the tower for the Roswell 3′′ clamps.
Specifications:
Inner Diameter: 2.25 in.
Material: Nylon
|
12.00 |
|
|
3" Clamp Insert - 2.5" Inner Diameter
This clamp insert is to change the fitting size to the tower for the Roswell 3′′ clamps.
Specifications:
Inner Diameter: 2.5 in.
Material: Nylon
|
12.00 |
|
|
3" Clamp Insert - 2.85" Inner Diameter
This clamp insert is to change the fitting size to the tower for the Roswell 3′′ clamps.
Specifications:
Inner Diameter: 2.85 in.
Material: Nylon
|
12.00 |
|
|
3" Clamp Insert - 1.9" Inner Diameter
This clamp insert is to change the fitting size to the tower for the Roswell 3′′ clamps.
Specifications:
Inner Diameter: 1.9 in.
Material: Nylon
|
12.00 |
|
|
3" Clamp Insert - 2" Inner Diameter
This clamp insert is to change the fitting size to the tower for the Roswell 3′′ clamps.
Specifications:
Inner Diameter: 2 in.
Material: Nylon
|
12.00 |
|
|
316 SS T-Bolt Clamp - 3/4" Band - 2.28"-2.59" Range - 10-Pack
Very strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union.
Recommendations:
For our Silicone and PVC products
Can be used on any hose connection with peace of mind that they will last you a very long time
It is recommended that two clamps be used on each end of a wet exhaust installation.
Construction:
Band & Housing: 316 stainless steel 3/4” wide band
T-Bolt and Nut: 18-8 stainless steel with nylon insert
Specifications:
Hose Inner Diameter (inch): 1-7/8" - 2"
Hose Outer Diameter (inch): 2.28" - 2.59"
|
81.68 |
|
|
316 SS T-Bolt Clamp - 3/4" Band - 2.78"-3.09" Range - 10-Pack
Very strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union.
Recommendations:
For our Silicone and PVC products
Can be used on any hose connection with peace of mind that they will last you a very long time
It is recommended that two clamps be used on each end of a wet exhaust installation.
Construction:
Band & Housing: 316 stainless steel 3/4” wide band
T-Bolt and Nut: 18-8 stainless steel with nylon insert
Specifications:
Hose Inner Diameter (inch): 2-3/8" - 2-1/2"
Hose Outer Diameter (inch): 2.78" - 3.09"
|
88.21 |
|
|
316 SS T-Bolt Clamp - 3/4" Band - 1.28"-1.59" Range - 10-Pack
Very strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union.
Recommendations:
For our Silicone and PVC products
Can be used on any hose connection with peace of mind that they will last you a very long time
It is recommended that two clamps be used on each end of a wet exhaust installation.
Construction:
Band & Housing: 316 stainless steel 3/4” wide band
T-Bolt and Nut: 18-8 stainless steel with nylon insert
Specifications:
Hose Inner Diameter (inch): 1"
Hose Outer Diameter (inch): 1.28" - 1.59"
|
75.92 |
|
|
316 SS T-Bolt Clamp - 3/4" Band - 1.78"-2.09" Range - 10-Pack
Very strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union.
Recommendations:
For our Silicone and PVC products
Can be used on any hose connection with peace of mind that they will last you a very long time
It is recommended that two clamps be used on each end of a wet exhaust installation.
Construction:
Band & Housing: 316 stainless steel 3/4” wide band
T-Bolt and Nut: 18-8 stainless steel with nylon insert
Specifications:
Hose Inner Diameter (inch): 1-3/8" - 1-1/2"
Hose Outer Diameter (inch): 1.78" - 2.09"
|
79.39 |
|
|
316 SS T-Bolt Clamp - 3/4" Band - 2.28"-2.59" Range
Very strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.
Specifications:
Band & Housing: 316 stainless steel 3/4 in. wide band
T-Bolt and Nut: 18-8 stainless steel with nylon insert
Hose Inner Diameter (inch): 1-7/8" to 2"
Hose Outer Diameter (inch): 2.28" to 2.59"
|
9.35 |
|
|
316 SS T-Bolt Clamp - 3/4" Band - 2.78"-3.09" Range
Very strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.
Specifications:
Band & Housing: 316 stainless steel 3/4 in. wide band
T-Bolt and Nut: 18-8 stainless steel with nylon insert
Hose Inner Diameter (inch): 2-3/8" to 2-1/2"
Hose Outer Diameter (inch): 2.78" to 3.09"
|
10.01 |
|
|
Impeller
Pump:F5
Material:MC97 (for cooling)
Outer Diameter:2.25"
Inner Diameter:Splines
Width:1.24"
A worn or damaged impeller can cause system failure or engine breakdown. SPX's Johnson Pump brand impellers are developed and manufactured for maximum flow and long life. With a genuine spare impeller you can also be sure that you are getting the quality required by engine manufacturers and professionals.
|
33.60 |
|
|
Stainless Steel Thru-Hull Short Straight Barbed - 5/8" Inner Diameter
Polish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?
Rugged Stainless Construction:
Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance
All visible areas are polished to a mirror finish, then passivate each part for additional protection
Thick steel sidewalls withstand continual stress and hose flexing
Faster, Simpler Installation:
Each Thru-Hull is available with a new silicone gasket
A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal
All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull
The barbed tail ends provide plenty of room to hold multiple clamps
Stainless Steel Straight Thru-Hulls, Barbed
Short Thread is a more compact size, which allows installation near corners and in confined areas
Specifications:
Hose size: (inch) 5/8" inner diameter
Flange Diameter: (inch) 1-7/8"
Thread O.D. (outside diameter): (inch) 1"
Thread Length: (inch) 1"
Barb Length: (inch) 1"
Total Length: (inch) 2-1/4"
Install Hole Saw Size: (inch) 1-1/8"
Thread NPSM: (inch) 3/4"
Max Hull Thickness: (inch) 5/8"
*Stainless Steel Thru-Hull Connectors are designed for installation above the water line only
|
18.25 |
|
|
Stainless Steel Thru-Hull Short Straight Barbed - 1-1/4" Inner Diameter
Polish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?
Rugged Stainless Construction:
Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance
All visible areas are polished to a mirror finish, then passivate each part for additional protection
Thick steel sidewalls withstand continual stress and hose flexing
Faster, Simpler Installation:
Each Thru-Hull is available with a new silicone gasket
A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal
All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull
The barbed tail ends provide plenty of room to hold multiple clamps
Stainless Steel Straight Thru-Hulls, Barbed
Short Thread is a more compact size, which allows installation near corners and in confined areas
Specifications:
Hose size: (inch) 1-1/4" inner diameter
Flange Diameter: (inch) 2-1/4"
Thread O.D. (outside diameter): (inch) 1-5/8"
Thread Length: (inch) 1-1/4"
Barb Length: (inch) 1"
Total Length: (inch) 2-5/8"
Install Hole Saw Size: (inch) 1-3/4"
Thread NPSM: (inch) 1-1/4"
Max Hull Thickness: (inch) 5/8"
*Stainless Steel Thru-Hull Connectors are designed for installation above the water line only
|
38.69 |
|
|
Stainless Steel Thru-Hull Standard Straight Barbed - 5/8" Inner Diameter
Polish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?
Rugged Stainless Construction:
Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance
All visible areas are polished to a mirror finish, then passivate each part for additional protection
Thick steel sidewalls withstand continual stress and hose flexing
Faster, Simpler Installation:
Each Thru-Hull is available with a new silicone gasket
A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal
All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull
The barbed tail ends provide plenty of room to hold multiple clamps
Stainless Steel Straight Thru-Hulls, Barbed
Standard Thread model has a full-length thread for thick hulls and easy tightening
Specifications:
Hose size: (inch) 5/8" inner diameter
Flange Diameter: (inch) 1-7/8"
Thread O.D. (outside diameter): (inch) 1"
Thread Length: (inch) 2"
Barb Length: (inch) 1-1/4"
Total Length: (inch) 3-3/4"
Install Hole Saw Size: (inch) 1-1/8"
Thread NPSM: (inch) 3/4"
Max Hull Thickness: (inch) 1-1/16"
*Stainless Steel Thru-Hull Connectors are designed for installation above the water line only
|
20.86 |
|