HRC1002 Multipurpose watertight hand held remote control 2 Button. HRC is the new Quick range of multipurpose hand-held remote controls, designed to for remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders etc. HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip. HRC remote controls are supplied complete with a connecting cable extensible up to 4.2 metres, a watertight deck plug and socket, and a support bracket for stowing after use.

HRC1002L Multipurpose watertight hand held remote control Integrated LED lamp The main innovation of the multipurpose HRC hand-held remote control is the built-in LED lamp, facilitating operation in the dark. This is the only hand-held remote in the nautical sector with this exclusive feature. HRC multipurpose hand-held remote controls are designed for remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders etc. HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip. HRC remote controls are supplied complete with: A connecting cable extensible up to 4.2M A watertight deck plug and socket A support bracket for stowing after use Built-in LED lamp HRC units are maintenance-free This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

HRC1004 4 Button Remote Control HRC Quick Handheld is a multipurpose remote with 4 buttons. This remote is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip. HRC remote controls are supplied complete with a connecting cable extensible up to 4.2 meters, a watertight deck plug and socket, and a support bracket for stowing after use. Applications Designed for the remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders, etc. Features: Watertight 4 buttons

HRC1004L Multipurpose watertight hand held remote control Integrated LED lamp The main innovation of the multipurpose HRC hand-held remote control is the built-in LED lamp, facilitating operation in the dark. This is the only hand-held remote in the nautical sector with this exclusive feature. HRC multipurpose hand-held remote controls are designed for remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders etc. HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip. HRC remote controls are supplied complete with: A connecting cable extensible up to 4.2M A watertight deck plug and socket A support bracket for stowing after use Built-in LED lamp HRC units are maintenance-free

HRC1004L 4-Button Remote with LED Light The main innovation of the multipurpose HRC hand-held remote control is the built-in LED lamp, which facilitates operation in the dark. This is the only hand-held remote in the nautical sector with this exclusive feature. HRC multipurpose hand-held remote controls are designed for the remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders, etc. HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip. HRC Remote Controls Are Supplied Complete With: A connecting cable is extensible up to 4.2 m. A watertight deck plug and socket A support bracket for stowing after use Built-in LED lamp HRC units are maintenance-free

Quick Radio Remote Control Receiver 913Mhz Features Number of relays - 2 Full power range (from 10.5 to 31Vdc). Relay current carring capacity - 15 A Power absorption in stand-by mode - 25 mA Microcontroller-operated functions. FSK modulation and carrier frequency 913Mhz Operating temperatures from -15°C to +70°C Indication of the system operating status, errors and problems by means of LED and seven-segment display Protection against polarity inversion Protection against low battery 50 transmitters can be stored Translation mode to activate more receivers, installed in different spots, by means of one transmitter Programmable digital filter

OP50 Wired Remote Control - Portrait Mount Perfectly designed for mounting in a helm chair arm, between monitors, or in other locations suiting a portrait orientation, the Simrad OP50 Remote Controller provides intuitive keypad and rotary-dial command of up to six NSS evo2 or NSO evo2 multifunction displays. Features: Control up to six NSS evo2 or NSO evo2 multifunction displays High-quality aluminium control dial with built-in cursor functions Portrait orientation (landscape version also available) Narrow design perfect for helm chair arm mounting Dash mount with low 8mm profile Zero-profile flush mount with optional bracket Integrated high-decibel speaker for critical alarms Quickly switch displays with dedicated button and LED indicators Single NMEA 2000® connection Manage Multiple Displays Networked with a single NMEA 2000® connection for both power and control, one OP50 Remote Controller can operate up to six networked multifunction displays. Integrated LED indicator lights clearly show the selected display number, while a dedicated button cycles quickly through the available displays. Controls Optimized for NSS evo2 and NSO evo2 The OP50 Remote Controller features a keypad specifically designed to operate the latest NSS evo2 and NSO evo2 multifunction displays efficiently and reliably in all conditions. The controller's high-quality aluminium dial features a knurled edge for precise rotary control, and built-in cursor functions for easy on-screen navigation. Easy Mounting in Vertical or Portrait Orientation The portrait OP50 is perfectly suited to mounting in the arm of a helm chair, with its narrow design and cable positioned specially to fit such installations. This orientation is also ideal for use in narrow consoles and beside Simrad MO-series touchscreen or pilothouse monitors. Dash mounting provides a slim 8mm profile, while an optional bracket allows total flush-mount installation. Specifications: NMEA 2000 Certified: Yes Operating Temperature: -15°C to +55°C/5°F to 131°F Waterproof Standard/Rating: IPX6 (from front when dash mounted with gasket) IPX2 (from back) Product Width: 60mm/2.36" Product Depth: 44.5mm/1.75" Product Height: 150mm/5.9" Product Weight: 0.3kg/0.66lb Power Consumption: <100mA@13.5V NMEA 2000 Load Equivalency Number: 2 network loads (100mA)

MCU006 Vertical Remote Control  Total Control with ease and comfort.  Furuno's MCU006 Series of Remote Controller for NavNet TZtouch3, TZtouchXL, and TZT2BB Multi-Function Displays feature a comfortable rotary knob and beveled keys for enhanced ease of use. The large knob can be utilized as the RotoKey and for zooming in/out on both TZtouch3 and TZtouchXL. The remote also has 10 dedicated buttons that operate different functions. A single MCU006 can control all of the displays. With a simple press of the Active Display Button, you can switch from one display to another. The MCU006 Remote Control is a perfect companion for any helm or bridge. Whether you want to mount the controller in the arm of the captain's chair, or you have a center console and want to have a remote on the transom while you are fishing, the MCU006 is an ideal solution.

Battery Status and Freedom Inverter/Charger Remote Control Provides Valuable Inverter/Charger System Monitoring and Control The Freedom Remote Control Panel (part#84-2056-01) allows you to control your Freedom Combi, Freedom 458 and Freedom Marine Series Inverter/Charger system from any convenient location. It is easy to read, operate and install, and all controls can be accessed directly from the front panel. Note: Not for Freedom HF or Freedom SW Series. Product Features Independent invert and charge on/off controls Push button control of power sharing, equalizing, battery set-up Multi-colored LED displays battery state of charge, fault conditions, AC input, DC voltage and DC amperage LED warning indictors for low battery and overload warning Splash resistant design Incoming AC breaker selection allows programmable power sharing Easy to install 25' Cable One year warranty Note: The 24-volt models of Freedom Combi inverter/chargers require a different Freedom Remote the Freedom Remote - 24V SKU 82-0101-04 WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

S100 Wireless SeaTalk autopilot remote control S100 Wireless Autopilot Remote Compact and lightweight, the S100 remote delivers the freedom of wireless control to any Raymarine SeaTalk autopilot. The bright display is easy to read with two lines of text and a graphical autopilot mode indicator. The 5 button ergonomic keypad and intuitive menu structure provides simple operation and easy access to extended features. Rugged and waterproof the S100 fits in your pocket or clips to your belt, keeping full function autopilot control always within reach. S100 Features Two line display with a graphical autopilot status indicator Crisp, high contrast 24 x 127 dot matrix display Backlit display Raised profile on Standby button for easy identification in the dark Keylock security Convenient, replaceable AAA alkaline batteries No longer comes with Belt clip Wireless Features: Up to 32 feet (10 meters) wireless operating range from the base station Signal strength indicator Pre-registered each unit leaves the factory already registered to the base station S100 comes with Instruction Manual, S100 Controller, Base Station, Cradle, Lanyard The S100 wireless autopilot controller is compatible with the following Raymarine/Autohelm SeaTalk Autopilots: ST1000 ST2000 ST3000 ST4000 ST5000 SmartPilot ST6001 SmartPilot ST7001 SmartPilot ST8001 SmartPilot S1000

MCU004 Remote Control for NavNet TZtouch & TZtouch2 Furuno's NavNet TZtouch and TZtouch2 Multi Function Displays have become widely utilized on a variety of helms and bridges. To enhance the various installations, Furuno has developed the MCU004, a versatile remote control unit that can be used with TZtouch and TZtouch2 units. The MCU004 Remote Control features a large rotary knob and joystick, which can be utilized as the RotoKey on NavNet TZtouch and for zooming in/out on both TZtouch and TZtouch2. In addition, the joystick allows you to pan around the chart and move the cursor on the screen. The remote also has dedicated buttons that operate different functions, such as Edge Swiping, Home, Stand By/Auto for Autopilot control, MOB, and Center on vessel. For those captains that have multiple TZtouch or TZtouch2 displays on their helm or bridge, a single MCU004 can control all of the displays. With a simple press of the Active Display Button, you can switch from one display to another. The MCU004 Remote Control is a perfect companion for any helm or bridge. Whether you are using the TZtouch Black Box and want to mount the MCU004 in the arm of the captain_s chair, or you have a center console and want to have a remote on the transom while you are fishing, the MCU004 is an ideal solution. Features: Rotary knob as well as a joystick to take the place of the RotoKey Allows users to zoom in and out Joystick functions like a mouse allowing users to move the cursor on the MFD screen Buttons for Edge Swiping, Home, MOB and more Single MCU004 can control multiple TZtouch and TZtouch2 displays Allows for toggling back and forth from one display to another WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Lunasea Remote Dimming Kit w/Receiver & Button Remote Lunasea Lighting's professional RF Transmitter and Receiver Kit A single zone easy touch interface with smooth dimming functionality. Easy, convenient tape mount transmitter. Receiver handles 8A and allows for hookup to manual normally open switch for local dimming in addition to remote control. Small form factor easily fits in tight locations. Technical Information Output Voltage / Wattage: 12V/96W, 24V/192W, 36V/288W Warranty: 1 Year 8 Amp Output Control Range of 20 Meters 12/24/32 Volt Systems Bonus external connection for physical switch

Reactor™ Autopilot Remote Control Rugged, Water-resistant Remote Places Autopilot Control in the Palm of Your Hand Provides easy, convenient mode and steering control for your Garmin autopilot Gesture control for heading hold and course corrections lets you simply point the remote where you want to go Features a bright, sunlight-readable color display and an ergonomic design for comfort and control Programmable preset buttons allow quick access to your favorite functions Water-resistant design floats, in case it’s dropped in the water Boasting a bright, sunlight-readable color display and an enhanced user experience, the Autopilot Remote also features a comfortable ergonomic design and programmable presets for quick access to your favorite functions. You can control steering with ease. The remote even lets you use gestures for heading hold and course corrections; just point the remote where you want to go. No need to worry if the remote takes a trip overboard, because it’s water-resistant and it floats. The Autopilot Remote includes both wrist and neck lanyards as well as a mountable cradle. And with a 45’ range, it’s functional from anywhere on the boat. It’s never been easier to place autopilot control in the palm of your hand. For use with GHC 20 and compatible¹ chartplotters to control your autopilot. ¹Compatible chartplotters include GPSMAP 7x2/9x2/12x2 Touch, 10x2/12x2, 74/7600, 84/8600 and newer models. In The Box: Reactor autopilot remote control Wrist lanyard Neck lanyard Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Remote Control f/SEC Battery Chargers The 900-RC remote control is designed for use with the following battery charger models: SEC-1250UL, SEC-1280UL, SEC-2425UL, SEC-2440UL SEC-1245A, SEC-1260A, SEC-1280A, SEC-2425A, SEC-2440A The 900-RC Remote Control comes with 33' of cable. The Remote Panel can be used to power ON/OFF and also monitor the charging status from a remote location. Features: Push button ON/OFF LED indicator Comes with 33' of cable Applications: Test bench Automotive Marine Communications sites Battery back-up systems Hobby WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Remote Control f/PST-600 & PST-1000 Inverters Optional remote control for use with PST Series 600 and 1000 Watt inverter models. Features: Remote push button on/off LED indicators for overload, over temperature and power Includes 15’ cable Sold separately Applications: PST-600-12 PST-600-24 PST-1000-12 PST-1000-24 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.