|
HRC1004 4 Button Remote Control
HRC Quick Handheld is a multipurpose remote with 4 buttons. This remote is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip. HRC remote controls are supplied complete with a connecting cable extensible up to 4.2 meters, a watertight deck plug and socket, and a support bracket for stowing after use.
Applications
Designed for the remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders, etc.
Features:
Watertight
4 buttons
|
196.02 |
|
|
HRC1004L 4-Button Remote with LED Light
The main innovation of the multipurpose HRC hand-held remote control is the built-in LED lamp, which facilitates operation in the dark. This is the only hand-held remote in the nautical sector with this exclusive feature.
HRC multipurpose hand-held remote controls are designed for the remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders, etc. HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip.
HRC Remote Controls Are Supplied Complete With:
A connecting cable is extensible up to 4.2 m.
A watertight deck plug and socket
A support bracket for stowing after use
Built-in LED lamp
HRC units are maintenance-free
|
261.36 |
|
|
HRC1004L
Multipurpose watertight hand held remote control
Integrated LED lamp
The main innovation of the multipurpose HRC hand-held remote control is the built-in LED lamp, facilitating operation in the dark. This is the only hand-held remote in the nautical sector with this exclusive feature.
HRC multipurpose hand-held remote controls are designed for remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders etc. HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip.
HRC remote controls are supplied complete with:
A connecting cable extensible up to 4.2M
A watertight deck plug and socket
A support bracket for stowing after use
Built-in LED lamp
HRC units are maintenance-free
|
211.20 |
|
|
HRC1002
Multipurpose watertight hand held remote control 2 Button.
HRC is the new Quick range of multipurpose hand-held remote controls, designed to for remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders etc. HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip. HRC remote controls are supplied complete with a connecting cable extensible up to 4.2 metres, a watertight deck plug and socket, and a support bracket for stowing after use.
|
133.30 |
|
|
HRC1002L
Multipurpose watertight hand held remote control
Integrated LED lamp
The main innovation of the multipurpose HRC hand-held remote control is the built-in LED lamp, facilitating operation in the dark. This is the only hand-held remote in the nautical sector with this exclusive feature.
HRC multipurpose hand-held remote controls are designed for remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders etc. HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip.
HRC remote controls are supplied complete with:
A connecting cable extensible up to 4.2M
A watertight deck plug and socket
A support bracket for stowing after use
Built-in LED lamp
HRC units are maintenance-free
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
164.74 |
|
|
Quick Radio Remote Control Receiver 913Mhz
Features
Number of relays - 2
Full power range (from 10.5 to 31Vdc).
Relay current carring capacity - 15 A
Power absorption in stand-by mode - 25 mA
Microcontroller-operated functions.
FSK modulation and carrier frequency 913Mhz
Operating temperatures from -15°C to +70°C
Indication of the system operating status, errors and problems by means of LED and seven-segment display
Protection against polarity inversion
Protection against low battery
50 transmitters can be stored
Translation mode to activate more receivers, installed in different spots, by means of one transmitter
Programmable digital filter
|
374.63 |
|
|
OP50 Wired Remote Control - Portrait Mount
Perfectly designed for mounting in a helm chair arm, between monitors, or in other locations suiting a portrait orientation, the Simrad OP50 Remote Controller provides intuitive keypad and rotary-dial command of up to six NSS evo2 or NSO evo2 multifunction displays.
Features:
Control up to six NSS evo2 or NSO evo2 multifunction displays
High-quality aluminium control dial with built-in cursor functions
Portrait orientation (landscape version also available)
Narrow design perfect for helm chair arm mounting
Dash mount with low 8mm profile
Zero-profile flush mount with optional bracket
Integrated high-decibel speaker for critical alarms
Quickly switch displays with dedicated button and LED indicators
Single NMEA 2000® connection
Manage Multiple Displays
Networked with a single NMEA 2000® connection for both power and control, one OP50 Remote Controller can operate up to six networked multifunction displays. Integrated LED indicator lights clearly show the selected display number, while a dedicated button cycles quickly through the available displays.
Controls Optimized for NSS evo2 and NSO evo2
The OP50 Remote Controller features a keypad specifically designed to operate the latest NSS evo2 and NSO evo2 multifunction displays efficiently and reliably in all conditions. The controller's high-quality aluminium dial features a knurled edge for precise rotary control, and built-in cursor functions for easy on-screen navigation.
Easy Mounting in Vertical or Portrait Orientation
The portrait OP50 is perfectly suited to mounting in the arm of a helm chair, with its narrow design and cable positioned specially to fit such installations. This orientation is also ideal for use in narrow consoles and beside Simrad MO-series touchscreen or pilothouse monitors. Dash mounting provides a slim 8mm profile, while an optional bracket allows total flush-mount installation.
Specifications:
NMEA 2000 Certified: Yes
Operating Temperature: -15°C to +55°C/5°F to 131°F
Waterproof Standard/Rating: IPX6 (from front when dash mounted with gasket) IPX2 (from back)
Product Width: 60mm/2.36"
Product Depth: 44.5mm/1.75"
Product Height: 150mm/5.9"
Product Weight: 0.3kg/0.66lb
Power Consumption: <100mA@13.5V
NMEA 2000 Load Equivalency Number: 2 network loads (100mA)
|
538.80 |
|
|
MCU006 Vertical Remote Control
Total Control with ease and comfort.
Furuno's MCU006 Series of Remote Controller for NavNet TZtouch3, TZtouchXL, and TZT2BB Multi-Function Displays feature a comfortable rotary knob and beveled keys for enhanced ease of use. The large knob can be utilized as the RotoKey and for zooming in/out on both TZtouch3 and TZtouchXL. The remote also has 10 dedicated buttons that operate different functions.
A single MCU006 can control all of the displays. With a simple press of the Active Display Button, you can switch from one display to another. The MCU006 Remote Control is a perfect companion for any helm or bridge. Whether you want to mount the controller in the arm of the captain's chair, or you have a center console and want to have a remote on the transom while you are fishing, the MCU006 is an ideal solution.
|
485.39 |
|
|
S100
Wireless SeaTalk autopilot remote control
S100 Wireless Autopilot Remote
Compact and lightweight, the S100 remote delivers the freedom of wireless control to any Raymarine SeaTalk autopilot. The bright display is easy to read with two lines of text and a graphical autopilot mode indicator. The 5 button ergonomic keypad and intuitive menu structure provides simple operation and easy access to extended features. Rugged and waterproof the S100 fits in your pocket or clips to your belt, keeping full function autopilot control always within reach.
S100 Features
Two line display with a graphical autopilot status indicator
Crisp, high contrast 24 x 127 dot matrix display
Backlit display
Raised profile on Standby button for easy identification in the dark
Keylock security
Convenient, replaceable AAA alkaline batteries
No longer comes with Belt clip
Wireless Features:
Up to 32 feet (10 meters) wireless operating range from the base station
Signal strength indicator
Pre-registered each unit leaves the factory already registered to the base station
S100 comes with Instruction Manual, S100 Controller, Base Station, Cradle, Lanyard
The S100 wireless autopilot controller is compatible with the following Raymarine/Autohelm SeaTalk Autopilots:
ST1000
ST2000
ST3000
ST4000
ST5000
SmartPilot ST6001
SmartPilot ST7001
SmartPilot ST8001
SmartPilot S1000
|
497.35 |
|
|
MCU004 Remote Control for NavNet TZtouch & TZtouch2
Furuno's NavNet TZtouch and TZtouch2 Multi Function Displays have become widely utilized on a variety of helms and bridges. To enhance the various installations, Furuno has developed the MCU004, a versatile remote control unit that can be used with TZtouch and TZtouch2 units.
The MCU004 Remote Control features a large rotary knob and joystick, which can be utilized as the RotoKey on NavNet TZtouch and for zooming in/out on
both TZtouch and TZtouch2. In addition, the joystick allows you to pan around the chart and move the cursor on the screen. The remote also has dedicated buttons that operate different functions, such as Edge Swiping, Home, Stand By/Auto for Autopilot control, MOB, and Center on vessel.
For those captains that have multiple TZtouch or TZtouch2 displays on their helm or bridge, a single MCU004 can control all of the displays. With a simple press of the Active Display Button, you can switch from one display to another.
The MCU004 Remote Control is a perfect companion for any helm or bridge.
Whether you are using the TZtouch Black Box and want to mount the MCU004 in the arm of the captain_s chair, or you have a center console and want to have a remote on the transom while you are fishing, the MCU004 is an ideal solution.
Features:
Rotary knob as well as a joystick to take the place of the RotoKey
Allows users to zoom in and out
Joystick functions like a mouse allowing users to move the cursor on the MFD screen
Buttons for Edge Swiping, Home, MOB and more
Single MCU004 can control multiple TZtouch and TZtouch2 displays
Allows for toggling back and forth from one display to another
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
426.67 |
|
|
Battery Status and Freedom Inverter/Charger Remote Control
Provides Valuable Inverter/Charger System Monitoring and Control
The Freedom Remote Control Panel (part#84-2056-01) allows you to control your Freedom Combi, Freedom 458 and Freedom Marine Series Inverter/Charger system from any convenient location. It is easy to read, operate and install, and all controls can be accessed directly from the front panel.
Note: Not for Freedom HF or Freedom SW Series.
Product Features
Independent invert and charge on/off controls
Push button control of power sharing, equalizing, battery set-up
Multi-colored LED displays battery state of charge, fault conditions, AC input, DC voltage and DC amperage
LED warning indictors for low battery and overload warning
Splash resistant design
Incoming AC breaker selection allows programmable power sharing
Easy to install
25' Cable
One year warranty
Note: The 24-volt models of Freedom Combi inverter/chargers require a different Freedom Remote the Freedom Remote - 24V SKU 82-0101-04
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
|
147.92 |
|
|
Lunasea Remote Dimming Kit w/Receiver & Button Remote
Lunasea Lighting's professional RF Transmitter and Receiver Kit
A single zone easy touch interface with smooth dimming functionality. Easy, convenient tape mount transmitter.
Receiver handles 8A and allows for hookup to manual normally open switch for local dimming in addition to remote control.
Small form factor easily fits in tight locations.
Technical Information
Output Voltage / Wattage: 12V/96W, 24V/192W, 36V/288W
Warranty: 1 Year
8 Amp Output
Control Range of 20 Meters
12/24/32 Volt Systems
Bonus external connection for physical switch
|
92.20 |
|
|
Reactor™ Autopilot Remote Control
Rugged, Water-resistant Remote Places Autopilot Control in the Palm of Your Hand
Provides easy, convenient mode and steering control for your Garmin autopilot
Gesture control for heading hold and course corrections lets you simply point the remote where you want to go
Features a bright, sunlight-readable color display and an ergonomic design for comfort and control
Programmable preset buttons allow quick access to your favorite functions
Water-resistant design floats, in case it’s dropped in the water
Boasting a bright, sunlight-readable color display and an enhanced user experience, the Autopilot Remote also features a comfortable ergonomic design and programmable presets for quick access to your favorite functions. You can control steering with ease. The remote even lets you use gestures for heading hold and course corrections; just point the remote where you want to go. No need to worry if the remote takes a trip overboard, because it’s water-resistant and it floats. The Autopilot Remote includes both wrist and neck lanyards as well as a mountable cradle. And with a 45’ range, it’s functional from anywhere on the boat. It’s never been easier to place autopilot control in the palm of your hand.
For use with GHC 20 and compatible¹ chartplotters to control your autopilot.
¹Compatible chartplotters include GPSMAP 7x2/9x2/12x2 Touch, 10x2/12x2, 74/7600, 84/8600 and newer models.
In The Box:
Reactor autopilot remote control
Wrist lanyard
Neck lanyard
Documentation
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
242.99 |
|
|
Round Zone Controller 4 Channel Remote for MZ-LC or SCM-LC
Control all of your boat or recreational vehicle’s RGB lighting with Shadow-Caster®’s easy-to-use multi-zone push-button lighting controller. Our unique system provides 4 independent zones of color, brightness, multiple fades, strobe, and music sync modes. The waterproof backlit controller can be mounted conveniently at your helm for quick and easy access.
|
212.40 |
|
|
Quick Hand Held Transmitter
Features
Number of Keys - 2
Power Supply - 3 alkaline AAA batteries or rechargeable Nims
Microcontroller-operated functions
FSK modulation and carrier frequency 913Mhz
Operating temperatures from -15°C to +70°C
Possibility to control more receivers with one transmitter
Two functions can be activated at the same time
Floating
Also working with rechargeable batteries
Keyboard backlighting by means of LEDs
|
178.60 |
|