Tower Wiring Harness Roswell’s Tower Wiring Harness contains 8 insulated and color-coded 16-gauge copper wires with a total length of 15 feet (4.5m). Features: 8 insulated, color-coded 16 gauge 316 stainless steel mounting hardware Male and female Speakon connections Full-body protection insulation Copper wires 15ft (4.5 m) included     

6-Pin Deutsch Connector Wiring Harness These two 6-pin wiring harnesses are perfect for users who need to mount two Roswell speakers.  Features: 6-pin Deutsch connector on one end and bare wires on the other end *Sold as a pair

4-Pin Deutsch Connector Wiring Harness These two 4-pin wiring harnesses are perfect for users who need to mount two Roswell speakers.  Features: 4-pin Deutsch connector on one end and bare wires on the other end *Sold as a pair

Wire Harness - High Power f/40" - 50" Light Bar This 13' wiring harness is designed to connect a single 40"-50" LED light bar to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, a 12V relay, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: 50" E-Series, 50" SR-Series. Features: 14 AWG Wire Deutsch Connector Inline Fuse Holder

Wire Harness f/10"-30" Light Bar This 11' wiring harness is designed to connect a single 10"-30" LED light bar to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, a 12V relay, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: 10" E-Series, 10" SR-Series, 20" E-Series, 20" SR-Series, 30" E-Series, 30" SR-Series, 40" E-Series, 40" SR-Series. Features: 16 AWG Wire Deutsch Connector Inline Fuse Holder 12 Volt Relay

Wire Harness f/4"-6" Light Bar This 11' wiring harness is designed to connect a single LED light to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: Dually (Single), D2 (Single), 4" E-Series, 6" E-Series, 4" SR-Series, 6" SR-Series. Features: 18 AWG Wire Deutsch Connector Inline Fuse Holder

Wire Harness f/D2 Pair This 14' wiring harness is designed to connect a pair of D2 LED lights to your 12V electrical system. It features battery terminals on one end and Deutsch connectors on the other to connect to the lights. It incorporates an inline fuse holder, a 12V relay, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: D2 (Pair). Features: 18 AWG Wire Deutsch Connector Inline Fuse Holder

Wiring Harness, 60 amp (712A, 912, 915, T2400, T4000, T3200PO, AP3500)

1 Lamp DR Wiring Harness & Switch Kit Universal Wiring Harness and Switch kit, (for 1 Lamp- DT connector), Universal Plug and Play Wiring Harness, with On-Off Rocker Switch, 12V DC Relay, 30A Fuse, With 2-pin DT connector for 1 Lamp only, With Waterproof Fuse Holder, Set includes Wiring Harness and Switch, Easy Installation, Use with one Heise Light Bar or Cube 22 inches or, smaller. Features: Universal Wiring Harness & Switch kit (for 1 Lamp, DT connector) Universal Plug and Play Wiring Harness with On/Off Rocker Switch 12V DC Relay 30A Fuse With 2-pin DT connectors for 2 Lamps With Waterproof Fuse Holder Set includes Wiring Harness & Switch Easy Installation Use with one Heise light bar 22 inches or smaller or any cube WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Wire Harness f/Dually Pair This 14' wiring harness is designed to connect a pair of Dually LED lights to your 12V electrical system. It features battery terminals on one end and Deutsch connectors on the other to connect to the lights. It incorporates an inline fuse holder, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: Dually (Pair). Features: 18 AWG Wire Deutsch Connector Inline Fuse Holder

Adapt Light Bar Small Wire Harness A wiring harness kit designed to be used with RIGID's Adapt light bars. The kit includes a wire harness and fuse for the 10 Inch to 30 Inch bars.  Specifications: Weight (Lbs): 0.86

2-Lamp Wiring Harness & Switch Kit From the leader in the lighting industry.  This universal wire harness is for DT connected lights and wire harnesses and allows a full-length installation.  Fully loaded and ready to be installed with two (2) Heise light bars (22" or smaller) and Heise cube lights. Specifications: 9' in Length Black in color In the Box: 12v DC Relay 30 amp Fuse Two (2) - two (2) Pin DT Connectors for two (2) Lamps Waterproof Fuse Holder On/Off Rocker Switch *Sold as an Individual 

ATP Wiring Harness & Switch Kit - 1 Lamp Universal Features: 9 ft lead for light bar connector(s) Universal wiring harness and switch kit (for 1 lamp, ATP connector) Universal plug-n-play wiring harness with on/off rocker switch 12V DC relay 30A fuse Use with 1 Heise light 160 watts or more

Deep-Pipe Sensor Wiring Harness - 6M Deep-Pipe Sensor Wiring Harness. Technical Specifications: Length - 6M (20') Communication - Analog Connector Type - TE Superseal 2-Pole IP67 Sensor Type - Tubular Sensors 54mm SS  Operating Voltage - 6 to 24 VDC  *Sold as an Individual  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Adapt XE Wire Harness The custom 70"(1.77M) wiring harness is specifically designed to connect RIGIDs Adapt XE  Extreme Enduro LED Moto Kit and switch to your bike's electrical system. It features battery terminals on one end and bullet connectors on the other to connect the light to the custom 3 position switch.  Also included is a blue wire with an insulated butt connector to power the light and switch and an in-line 15A fuse holder. Features: Length - 70 " (1.77 M) wiring harness Features battery terminals on one end and bullet connectors on the other Connect the light to the custom 3 position switch Inline 15A fuse holder included *Sold as an Individual