|
Pulsafeeder LB02SA-VTC1-XXX Pump A Plus 6Gpd
Max Flow: 0.25 gph (6 gpd)
Max Pressure: 150 psi (10 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVC (Polyvinyl Chloride)
Seats / O-Rings: TFE (Teflon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB02SA-VTC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
690.94 |
|
|
Pulsafeeder LB02SA-VHC1-XXX Pump A Plus 6Gpd
Max Flow: 0.25 gph (6 gpd)
Max Pressure: 150 psi (10 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVC (Polyvinyl Chloride)
Seats / O-Rings: CSPE (Hypalon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB02SA-VHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
674.06 |
|
|
Pulsafeeder LB02SA-KTC1-XXX Pump A Plus 6Gpd
Max Flow: 0.25 gph (6 gpd)
Max Pressure: 150 psi (10 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVDF (Kynar)
Seats / O-Rings: TFE (Teflon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB02SA-KTC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
743.40 |
|
|
Pulsafeeder LB02SA-PHC1-XXX 6 Gpd 150 Psi 115V Pump
Max Flow: 0.25 gph (6 gpd)
Max Pressure: 150 psi (10 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: GFPPL (Glass Filled Polypropylene)
Seats / O-Rings: CSPE (Hypalon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB02SA-PHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
674.06 |
|
|
Pulsafeeder LPH6SA-VTC3-XXX E Plus Pump 120 Gpd
Max Flow: 5.00 gph (120 gpd)
Max Pressure: 100 psi (7 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVC (Polyvinyl Chloride)
Seats / O-Rings: TFE (Teflon)
Balls: Ceramic
Tubing: 1/2" OD
Control: Manual On/Off
The Pulsafeeder Pulsatron LPH6SA-VTC3-XXX Series E Plus Metering pump has a large range of flow and pressure capabilities, make it one of the most versatile series of metering pumps that Pulsafeeder offers. The Series E Plus has flow capabilities ranging from 3 GPD (Gallons per Day) to 600 GPD. The GPD combined with the pressure range of 30 to 300 PSI makes the Series E Plus an excellent choice for your metering application. Having such a wide range of flow and pressure capabilities, you can choose from 20 different pump models in the Series to fit your exact specifications.
Features:
- Manual On/Off Control, Automatic control or 4-20mADC Direct w/ stop function depending on the model.
- Manual control of stroke rate and length via control knobs on the front of the pump.
- Fuse mounted on the panel for extra protection.
- Designed out of water resistant material (perfect for indoor & outdoor placement).
|
1555.20 |
|
|
Pulsafeeder LPH4SA-PTC1-XXX E Plus Pump 40 Gpd
Max Flow: 1.70 gph (41 gpd)
Max Pressure: 250 psi (17 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: GFPPL (Glass Filled Polypropylene)
Seats / O-Rings: TFE (Teflon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
The Pulsafeeder Pulsatron LPH4SA-PTC1-XXX Series E Plus Metering pump has a large range of flow and pressure capabilities, make it one of the most versatile series of metering pumps that Pulsafeeder offers. The Series E Plus has flow capabilities ranging from 3 GPD (Gallons per Day) to 600 GPD. The GPD combined with the pressure range of 30 to 300 PSI makes the Series E Plus an excellent choice for your metering application. Having such a wide range of flow and pressure capabilities, you can choose from 20 different pump models in the Series to fit your exact specifications.
Features:
- Manual On/Off Control, Automatic control or 4-20mADC Direct w/ stop function depending on the model.
- Manual control of stroke rate and length via control knobs on the front of the pump.
- Fuse mounted on the panel for extra protection.
- Designed out of water resistant material (perfect for indoor & outdoor placement).
|
1929.60 |
|
|
Pulsafeeder LB64SA-PHC1-XXX Pump 30 Gpd A Plus
Max Flow: 1.25 gph (30 gpd)
Max Pressure: 100 psi (7 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: GFPPL (Glass Filled Polypropylene)
Seats / O-Rings: CSPE (Hypalon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB64SA-PHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
674.06 |
|
|
Pulsafeeder LPE4SA-PTT1-XXX Metering Pump
Max Flow: 1.85 gph (44 gpd)
Max Pressure: 100 psi (7 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: GFPPL (Glass Filled Polypropylene)
Seats / O-Rings: TFE (Teflon)
Balls: TFE (Teflon)
Tubing: 3/8" OD
Control: Manual On/Off
The Pulsafeeder Pulsatron LPE4SA-PTT1-XXX Series E Plus Metering pump has a large range of flow and pressure capabilities, make it one of the most versatile series of metering pumps that Pulsafeeder offers. The Series E Plus has flow capabilities ranging from 3 GPD (Gallons per Day) to 600 GPD. The GPD combined with the pressure range of 30 to 300 PSI makes the Series E Plus an excellent choice for your metering application. Having such a wide range of flow and pressure capabilities, you can choose from 20 different pump models in the Series to fit your exact specifications.
Features:
- Manual On/Off Control, Automatic control or 4-20mADC Direct w/ stop function depending on the model.
- Manual control of stroke rate and length via control knobs on the front of the pump.
- Fuse mounted on the panel for extra protection.
- Designed out of water resistant material (perfect for indoor & outdoor placement).
|
1139.40 |
|
|
Pulsafeeder LB64SA-VHC1-XXX Metering Pump 30Gpd Hypalon
Max Flow: 1.25 gph (30 gpd)
Max Pressure: 100 psi (7 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVC (Polyvinyl Chloride)
Seats / O-Rings: CSPE (Hypalon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB64SA-VHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
674.06 |
|
|
CAL PUMPS
A/C Circulation Pump - Air Conditioning & Cooling - Air Conditioning - Seawater Circulation Pump - Magnetic Drive Small Pond Pump
CAL customers rely on our stainless steel and bronze pumps, and once you've owned one, you'll know why. Four different models are offered at CLR Marine with flow rates from 320 gph to 1,200 gph cover a wide variety of uses. All pumps in this series come with a one-year warranty and will provide trouble free use in fresh or salt water. You can even use it in hot water up to 110°F!
6' power cords are standard.
Features & Benefits of the CAL PUMPS:
One year warranty
UL Listed for consumer confidence
Premium stainless steel and bronze construction for longevity
Six or twenty foot power cord for convenience
Suitable for fresh or salt water applications
Can be used in hot water applications up to 110°F
Extremely quiet operation
Use submerged or in open air
Corrosion resistant
115 or 220 volt motors
Thermally protected
Optional Mounting Bracket Available (model MSUB OR MSUBM)
Do Not Run Dry
Operate horizontal or volute down
MS320 have ½” MNPT intake and ¼” MNPT discharge
MS580, 900, 1200 have ¾” MNPT intake and ½” MNPT discharge
Cal 1200 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS1200
Cal 900 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS900
Cal 580 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS580
Cal 320 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS320
See all Cal Pump Products
S T A I N L E S S S T E E L & B R O N Z E P U M P S
Model
AMPS
(MIN/MAX)
WATTS
(MIN/MAX)
MAX
FLOW
MAX
HT.
1'
3'
5'
7'
9'
11'
13'
15'
17'
MS320
1.05-1.30
68-89
375
12.7'
360
335
305
262
215
-
-
-
-
MS580
2.15-2.55
138-203
860
14'
830
750
675
580
475
345
125
-
-
MS900
2.17-2.76
156-234
885
16'
855
790
725
650
560
460
350
175
-
MS1200
2.97-3.79
208-312
1100
18'
1070
1000
925
850
760
675
560
425
225
Cal Pumps at CLR Marine
|
|
|
Pulsafeeder LC04SA-PHC1-XXX Metering Pump 24Gpd 115V
|
537.19 |
|
|
Pulsafeeder LMH6TA-KTC3-500 120Gpd 115V Pvdf/Tef Meter
Max Flow: 5.00 gph (120 gpd)
Max Pressure: 100 psi (7 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVDF (Kynar)
Seats / O-Rings: TFE (Teflon)
Balls: Ceramic
Tubing: 1/2" OD
Options: 5 Function Valve
Control: Signal Level Control
Pulsafeeder Pulsatron Series MP Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
2374.20 |
|
|
Groco P-9000 3/4" Rotary Pump Assy
Groco- Rotary Pump Head Only Bronze 11GPM 100psi Max at 1725RPM 3/4"FNPT Ports
More Info: P9000
|
1159.20 |
|
|
Tuthill 0LEV-C-A-7 Pump
Tuthill 0LEV-C-A-7 Pump with Relief valve CW rotation only with Tang Shaft
Tuthill 0LE Series are compact, highly efficient, cast iron positive displacement rotary gear pumps with a mechanical seal. Pumping action is based on a rotor, idler gear, and a cover cast with a crescent-shaped partition. They are self priming and particularly suited to handle liquids of 35 to 1000 SSU viscosity. Higher viscosities can be handled at reduced speeds. The pump has a non-pulsating flow and runs substantially quieter than other pump designs.
Features :
Pump Body: Cast Iron
Relief Valve: Relief valve is factory set to 55 PSI for spring adjustment between 55-120 PSI.
Shaft Seal: Mechanical Seal Viton
Port Size: Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT.
|
611.00 |
|
|
Calpeda NM25-12B/A Cast Iron Pump
NM 25/12B/A 230/400V 0,55kW 2900rpm
Close-coupled centrifugal pump with electric motor and extended shaft directly connected to the pump.
NM: single-Impeller.
Connections: threaded ports ISO 228/1 (BS 2779).
NM, NMD: version with pump casing and lanter bracket in cast iron.
B-NM, B-NMD: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted).
For clean liquids without abrasives, which are non-aggressive for the pump materials (solids content up to 0.2%)
For water supply
For heating, air-conditioning, cooling and circulation plants
For civil and industrial applications
For fire fighting applications
For irrigation
|
567.19 |
|