Pulsafeeder L380DT03PVD 5 Function Valve

Pulsafeeder LMH6TA-KTC3-500 120Gpd 115V Pvdf/Tef Meter Max Flow: 5.00 gph (120 gpd) Max Pressure: 100 psi (7 BAR) Power: 115 Volt / 50-60Hz Head Fittings: PVDF (Kynar) Seats / O-Rings: TFE (Teflon) Balls: Ceramic Tubing: 1/2" OD Options: 5 Function Valve Control: Signal Level Control   Pulsafeeder Pulsatron Series MP Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.   Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.   The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.  

Pulsafeeder L3201TC3-FPP Valve Assembly Connection: 1/2" OD Body Material: FPP O-Ring Material: Teflon Includes: O-Ring   For use with PTC3 wet end configuration.   The L3201TC3-FPP Discharge Valve Assembly attaches to the upper side of the head of your metering pump.

Chesapeake Black 5" Multifunction Gauge Perimeter-lighted black dial with stylish blue and white graphics, polished stainless steel bezel, contoured White pointer, and domed glass lens.  5" - Hole size: 4.375" (112mm)  Multi-Function Gauge Displays: Fuel (E-1/2-F) Voltmeter (10 - 18 VDC) Oil Pressure (0 - 80 PSI) Water Temperature (120 - 220° F) 4" - Hole size: 3.375" (85mm) Specifications: Anti-scratch glass lens Perimeter lighted back light 12 VDC negative ground Can be adapted for 24 VDC systems  Factory P/N GF4005 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Chesapeake White SS 5" Multifunction Gauge  Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens. 5" - Hole size: 4.375" (112mm)  Multi-Function Gauge Displays: Fuel (E-1/2-F) Voltmeter (10 - 18 VDC) Oil Pressure (0 - 80 PSI) Water Temperature (120 - 220° F) Specifications: Anti-scratch glass lens Perimeter lighted back light 12 VDC negative ground Can be adapted for 24 VDC systems  Factory P/N GF4004 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DS30-P-3 Vertical Cable Seal *5-Pack Scanstrut premium IP68 waterproof cable seal provides easy-fit cable routing that cuts down your installation time and is the only guaranteed and proven watertight installation for your antenna and navlight cables.  Features: Watertight installation - 100% waterproof with an IP68 rating Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during installation.  Multi-Functional Dome Shape - the aesthetic dome-shaped profile provides a stronger, impact-resistant design and the outer dome provides an additional water shield. Technical Specifications: Fits cable size (diameter) - .35" to .55" (9 - 14 mm)   Fits connector size up to 1.18" (30 mm) in diameter  Height - .81" (20.5 mm) Color - Grey Orientation - Vertical Material - ASA Plastic In the Box: Cable seal Mounting hardware Installation manual  *Sold as a Five (5) Pack

Yamada 709319 Spring 5 Pilot Valve

Pulsafeeder LPE4SA-PTT1-XXX Metering Pump Max Flow: 1.85 gph (44 gpd) Max Pressure: 100 psi (7 BAR) Power: 115 Volt / 50-60Hz Head Fittings: GFPPL (Glass Filled Polypropylene) Seats / O-Rings: TFE (Teflon) Balls: TFE (Teflon) Tubing: 3/8" OD Control: Manual On/Off   The Pulsafeeder Pulsatron LPE4SA-PTT1-XXX Series E Plus Metering pump has a large range of flow and pressure capabilities, make it one of the most versatile series of metering pumps that Pulsafeeder offers. The Series E Plus has flow capabilities ranging from 3 GPD (Gallons per Day) to 600 GPD. The GPD combined with the pressure range of 30 to 300 PSI makes the Series E Plus an excellent choice for your metering application. Having such a wide range of flow and pressure capabilities, you can choose from 20 different pump models in the Series to fit your exact specifications.   Features: - Manual On/Off Control, Automatic control or 4-20mADC Direct w/ stop function depending on the model. - Manual control of stroke rate and length via control knobs on the front of the pump. - Fuse mounted on the panel for extra protection. - Designed out of water resistant material (perfect for indoor & outdoor placement).

Pulsafeeder LPH6SA-VTC3-XXX E Plus Pump 120 Gpd Max Flow: 5.00 gph (120 gpd) Max Pressure: 100 psi (7 BAR) Power: 115 Volt / 50-60Hz Head Fittings: PVC (Polyvinyl Chloride) Seats / O-Rings: TFE (Teflon) Balls: Ceramic Tubing: 1/2" OD Control: Manual On/Off   The Pulsafeeder Pulsatron LPH6SA-VTC3-XXX Series E Plus Metering pump has a large range of flow and pressure capabilities, make it one of the most versatile series of metering pumps that Pulsafeeder offers. The Series E Plus has flow capabilities ranging from 3 GPD (Gallons per Day) to 600 GPD. The GPD combined with the pressure range of 30 to 300 PSI makes the Series E Plus an excellent choice for your metering application. Having such a wide range of flow and pressure capabilities, you can choose from 20 different pump models in the Series to fit your exact specifications.   Features: - Manual On/Off Control, Automatic control or 4-20mADC Direct w/ stop function depending on the model. - Manual control of stroke rate and length via control knobs on the front of the pump. - Fuse mounted on the panel for extra protection. - Designed out of water resistant material (perfect for indoor & outdoor placement).

Pulsafeeder LPH4SA-PTC1-XXX E Plus Pump 40 Gpd Max Flow: 1.70 gph (41 gpd) Max Pressure: 250 psi (17 BAR) Power: 115 Volt / 50-60Hz Head Fittings: GFPPL (Glass Filled Polypropylene) Seats / O-Rings: TFE (Teflon) Balls: Ceramic Tubing: 3/8" OD Control: Manual On/Off   The Pulsafeeder Pulsatron LPH4SA-PTC1-XXX Series E Plus Metering pump has a large range of flow and pressure capabilities, make it one of the most versatile series of metering pumps that Pulsafeeder offers. The Series E Plus has flow capabilities ranging from 3 GPD (Gallons per Day) to 600 GPD. The GPD combined with the pressure range of 30 to 300 PSI makes the Series E Plus an excellent choice for your metering application. Having such a wide range of flow and pressure capabilities, you can choose from 20 different pump models in the Series to fit your exact specifications.   Features: - Manual On/Off Control, Automatic control or 4-20mADC Direct w/ stop function depending on the model. - Manual control of stroke rate and length via control knobs on the front of the pump. - Fuse mounted on the panel for extra protection. - Designed out of water resistant material (perfect for indoor & outdoor placement).

Pulsafeeder L3300H01-PVC Bleed Valve Assy Connection: 3/8" OD Body Material: PVC O-Ring Material: CSPE Includes: Teflon Gasket   For use with VHC1 & VAT1 wet end configuration.   The L3300H01-PVC Bleed Valve Assembly attaches to the discharge fitting on the head of your Pulsatron metering pump. The purpose of the Bleed Valve is to help your pump prime properly and remove any air that may be trapped within the suction line.

Pulsafeeder L3101HC1-FPP Suction Valve Assy Connection: 3/8" OD Body Material: FPP O-Ring Material: Hypalon Includes: O-Ring   For use with PHC1 wet end configuration.   The L3101HC1-FPP Suction Valve Assembly attaches to the lower side of the head of your metering pump.

Pulsafeeder L3201HC1-FPP Discharge Valve Assy Connection: 3/8" OD Body Material: FPP O-Ring Material: Hypalon Includes: O-Ring   For use with PHC1 wet end configuration.   The L3201HC1-FPP Discharge Valve Assembly attaches to the upper side of the head of your metering pump.

Pulsafeeder LB02SA-PHC1-XXX 6 Gpd 150 Psi 115V Pump Max Flow: 0.25 gph (6 gpd) Max Pressure: 150 psi (10 BAR) Power: 115 Volt / 50-60Hz Head Fittings: GFPPL (Glass Filled Polypropylene) Seats / O-Rings: CSPE (Hypalon) Balls: Ceramic Tubing: 3/8" OD Control: Manual On/Off   Pulsafeeder Pulsatron LB02SA-PHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.   Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.   The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.

Pulsafeeder LB02SA-VHC1-XXX Pump A Plus 6Gpd Max Flow: 0.25 gph (6 gpd) Max Pressure: 150 psi (10 BAR) Power: 115 Volt / 50-60Hz Head Fittings: PVC (Polyvinyl Chloride) Seats / O-Rings: CSPE (Hypalon) Balls: Ceramic Tubing: 3/8" OD Control: Manual On/Off   Pulsafeeder Pulsatron LB02SA-VHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.   Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.   The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.