JABSCO 29460-10-1051 PUMP BRONZE FLANGE Jabsco Engine Cooling Pump 29460-10-1051 has Bronze Flange Mount with a Splined Shaft. Used with Beta, Kubota, Nanni, Vetus and Zeise with 20mm Hose Ports.

Jabsco 17360-1001 Engine Cooling Pump For Detroit Diesel, V-71-92, 23507475, 23507476, 23507477, 23507973   Caterpillar, D-336, D-343, D-353, 3N1888   Some Stewart & Stevenson Marinizations of Detroit Diesel Engines.   Pump Body: Bronze Port Size: 2-1/2" Flange Type Impeller: Neoprene use Jabsco 17370-0001-P Impeller Cam: Wear Resistant Polyurethane Cam/Liner Shaft Seal: Mechanical Face Seal Shaft: 316 Stainless Steel   Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Bronze flexible impeller engine cooling pump Flow rate: Nominal 270 Litres/min (60 gallons/min) at 1500rpm Self-priming from dry up to 2.4m (7.8ft)   Minor plumbing modifications may be required for certain applications.   Jabsco Engine Cooling Pump, 6 cover screws with double flat Impeller drive   

Jabsco 10970-21 Pump Perkins 4236 with Flanges Bronze Pump Body: Bronze head, Cast Iron bearing housing Port Size: 3/4" NPT or 3/4" Flanged Flow: Nominal 40 Litres/min (8.9 gallons/min) at 1500rpm Impeller: Neoprene Shaft Seal: Carbon/ceramic mechanical type Shaft: 316 Stainless Steel Bearings: Twin single row, ball type Engine Cooling Pump. Self-priming from dry up to 2.4m (7.8ft) Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain.  

Jabsco 9970-200 Pump for Perkins 4-107 Pump Body: Bronze Flange Mounted Port Size: 3/4" BSP Thread (not NPT) Impeller: Neoprene Shaft Seal: Mechanical Shaft: Stainless Steel   Flange Mounted Engine Cooling Pump   The 9970-200 model uses a short shaft with a coupling.  

Jabsco 29450-1701 Pump for Perkins Marine Engine Pump Body: Bronze Port Size: 3/4" (20mm) Horizontal Hose Ports Impeller: Neoprene   3/4" (20mm) hose ports, 'hot stamp' body with integral cam, 4 bolt flange mount, 3 screw end cover, shaft drive end has screw thread and taper.   For Perkins Marine and others.  

Jabsco 9700-04 Pump for Perkins 6354 2/3 Cam Pump Body: Bronze Port Size: Flanged Impeller: Neoprene  

Jabsco 29700-1331 Engine Cooling Pump The Jabsco Engine Cooling Pump 29700-1331 is used for the BMW Diesel.

Jabsco 29350-1001 Pump for Perkins Pump Body: Bronze Port Size: Horizontal Hose Ports Impeller: Neoprene Marine Engine Cooling for Perkins.

Jabsco 29640-1101 Perkins Engine Cooling Pump Standard on Perkins 1000 ”Phaser” series 1" bronze pump flange-mounted with 1¼" hose ports

Jabsco 50310-1001 Gear Driven Engine Cooling Pump Pump Body: Bronze, Flange Mounted To Engine Ports: 32mm, 1-1/4" Shaft Seal: Mechanical Seal Shaft: Tapered Shaft To Accept Engine Builder Supplied Gear Gear Is Not Included   Found on Northern Lights (Luger) Generators and John Deere. These same parts also fit the 30510-7001 pump.  

Sherwood P2708X CUMMINS PUMP Sherwood bronze engine cooling pump Pulley driven pump - pulley not included Includes installed neoprene impeller Does not include inlet and outlet port elbows Mechanical seal Replacement impeller P/N 27000K Replaces Sherwood P2701-01, P2701-02, P2701X Replaces Cummins 4948142, 5266001, 5268375

Jabsco 10970 Series Engine Cooling Pump Pump Body: Bronze head, Cast Iron bearing housing Port Size: 3/4" NPT or 3/4" Flanged Flow: Nominal 40 Litres/min (8.9 gallons/min) at 1500rpm Impeller: Neoprene Shaft Seal: Carbon/ceramic mechanical type Shaft: 316 Stainless Steel Bearings: Twin single row, ball type     APPLICATIONS Engine Cooling Pump. Self-priming from dry up to 2.4m (7.8ft) Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain.  Jabsco Engine Cooling Pump 3/4"NPT Perkins 2488322 & 2488324 & 4236 & M80

Sherwood P1733X-J Engine Cooling Pump JPR-S7633 JPR-S7633 John Deere Replacement Engine Cooling Seawater Pump See: https://www.clrmarine.com/m4/JMPMA%20JPR-S7633--jmp-marine-jpr-s7633-john-deere-re515657-dz114697-engine-cooling-pump.html

Jabsco 22645-0000 Perkins Seal Jabsco 22645-0000 pump mechanical seal assembly is suitable to be used with 1" Jabsco engine cooling pumps.    This item is typically put together at time of order, that is why you see 0 in stock.   Jabsco Seal Assembly is for the following Pumps: 11590-204, 11590-204, 9700, 9700-01, 9700-04, 9700-05, 9700-101, 9700-131, 9700-132, 9700-141, 9700-151, 9700-162, 9700-171, 9700-181, 9700-21, 9700-241, 9700-41, 9700-51, 9700-61 and 9700-71.  

Jabsco Engine Cooling Flexible Impeller Bronze Pedestal Pump FEATURES Pump Body: Bronze head, cast iron pedestal Port Size: 3/4" BSP Flow: 40 Litres/min (8.9 gallons/min) at 1500rpm Impeller: Neoprene or Nitrile, High pressure impeller also available. Shaft Seal: Carbon Ceramic Face-Type Shaft: Stainless Steel     APPLICATIONS Utility pedestal pump. Engine Cooling. Self-priming from dry up to 2.4m (7.8ft) Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock.    Jabsco Engine Cooling Flexible Impeller Pedestal Pump 3/4" British Standard Pipe Threads, Neoprene Impeller