Engine Cooling Pump - Flange Mount - 1-1/4" Pump Flow rate: 14 gallons/min at 1500 rpm Self priming from dry up to 2.4 m (7.8ft) Features: Constructed from marine quality bronze and stainless steel for ruggedness and reliability Easy to service and maintain Body: Bronze Impeller: Neoprene Wearplate: Not fitted Shaft: 316 Stainless Steel Bearings: Single row, ball type Port Type: 1-1/4" Hose Barb Weight: 5 lb WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Engine Cooling Pump - Bracket Mount - 1 1/4" Pump Flow rate: 20 Gallons/min at 1500rpm. Self-priming from dry up to 2.4m (7.8ft) Features: Constructed from marine quality bronze and stainless steel for ruggedness and reliability Easy to service and maintain Body: Bronze Impeller: Neoprene Wearplate: Replaceable Shaft: Stainless steel Shaft Seal: Lip Type Bearings: Twin single row, ball type Port type: 1-1/4" Hose Barb Weight: 7 lb WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Jabsco 3270-0001 Engine Cooling Pump 3/4" Ports Flange Mount Perkins 4-107 Perkins 4-108 Fitting: 3/4 in. NPT Size: 4 1/4 in. long x 4 1/8 in. wide x 3 7/8 in. high Weight: 4 lb (1.8 kg) Drive: Coupling Mount: Engine    

Jabsco 17360-1001 Engine Cooling Pump For Detroit Diesel, V-71-92, 23507475, 23507476, 23507477, 23507973   Caterpillar, D-336, D-343, D-353, 3N1888   Some Stewart & Stevenson Marinizations of Detroit Diesel Engines.   Pump Body: Bronze Port Size: 2-1/2" Flange Type Impeller: Neoprene use Jabsco 17370-0001-P Impeller Cam: Wear Resistant Polyurethane Cam/Liner Shaft Seal: Mechanical Face Seal Shaft: 316 Stainless Steel   Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Bronze flexible impeller engine cooling pump Flow rate: Nominal 270 Litres/min (60 gallons/min) at 1500rpm Self-priming from dry up to 2.4m (7.8ft)   Minor plumbing modifications may be required for certain applications.   Jabsco Engine Cooling Pump, 6 cover screws with double flat Impeller drive   

Jabsco 15780-0000 Cummins Vortex Pump FEATURES Pump Body: Bronze Ports: Flanged Flow: to 400 GPM Pressure: to 48 PSI Impeller: Flexible Impeller for Priming Centrifugal Impeller for Flow Motor: Engine Mounted   Cummins engine models K38 / K50 / KTA38 / KTA50. It is the same pump as Cummins engine part 3393018 / 4314820 / 4314522. This pump is a two impeller pump, and has a flexible impeller for self-priming, and a bronze centrifugal impeller for flow. It combines the priming feature of flexible impeller type pumps with the high flow ability of centrifugal pumps. This pump is self-priming, and will self-prime at low or high speeds. Be sure suction lines are airtight or the pump will not self-prime.    APPLICATIONS  Sea Water Engine Cooling for Cummins engines  

Jabsco 18940-0010 Engine Cooling Pump 1 1/4" Ports Pump Body: Bronze Port Size: 1 1/4" ID Hose Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: Stainless Steel Pulley: 6 1/2" diameter "A" belt     This Jabsco alternator mounted engine driven water pump has been used on a wide range of engines including Chrysler, Lehman, and Powerhouse Marine. Engineered for marine applications and a long service life, the body is cast bronze and features a stainless steel shaft. Impeller access is available by removing the front portion of the pump body. Hose barbs are cast into the pump body so that tail pieces are not required for installation. Pump is driven by a 6 1/2" pulley that is compatible with type A belts.   Key Features Flange mounted engine driven flexible impeller water pump Self-priming at slow RPMs Includes 6 1/2" pulley compatible with type A belts Corrosion resistant bronze pump body  Stainless steel shaft for superior corrosion resistance   Compatible engines   Chrysler: replaces Sherwood model G5 LM 318 LM 340 LM 360 LM 383 LM 400 LM 440 Lehman 302, 351 cu. in. Powerhouse Marine 302, 351 cu. in.  

Jabsco 50310-1001 Gear Driven Engine Cooling Pump Pump Body: Bronze, Flange Mounted To Engine Ports: 32mm, 1-1/4" Shaft Seal: Mechanical Seal Shaft: Tapered Shaft To Accept Engine Builder Supplied Gear Gear Is Not Included   Found on Northern Lights (Luger) Generators and John Deere. These same parts also fit the 30510-7001 pump.  

JABSCO 29460-10-1051 PUMP BRONZE FLANGE Jabsco Engine Cooling Pump 29460-10-1051 has Bronze Flange Mount with a Splined Shaft. Used with Beta, Kubota, Nanni, Vetus and Zeise with 20mm Hose Ports.

Johnson 10-35157-3 Engine Cooling Pump   FEATURES Pump Body: Bronze Ports: Threaded or Hose Cam: Full or 1/2 Impeller: Neoprene Shaft Seal: 2 Lip Seals Drive: Flange Mounted to Engine.     APPLICATIONS / CHARACTERISTICS Flexible Impeller Engine Cooling Pump. Requires (2) Johnson 01-43238 Clamps to Mount.   Johnson- Engine Cooling Pump Threaded Ports Full Cam  F35B-9, Volvo 807368 833415 833522 833883    

Jabsco 17540-0201 Engine Cooling Pump Jabsco 17540-0201 is a Detroit Diesel marine engine cooling pump   Impeller: Neoprene Shaft Seal: Carbon/Ceramic Mechanical Seal Port Size: 3 Inch   This is the Marine Engine Cooling Pump for Detroit Diesel Series 60 Engines,  Detroit Diesel pumps 23525200, 23522735, 23535447. 

Jabsco 18840 Series Engine Cooling Pump Pump Body: Bronze Port Size: 1" ID Hose Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: Stainless Steel Pulley: 6 1/2" diameter "A" belt   Jabsco Engine Cooling Pump High Pressure 1" Hose Ports With 6 1/2" "A" Belt Pulley  

Jabsco Flexible Impeller Pedestal Pump 3/4" Vert Port Ped Mt   FEATURES Pump Body: Bronze, Pedestal Mount Port Size: 3/4" NPT Internal Flow: Nominal 40 Litres/min (10.6 gallons/min) at 1500rpm Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: Stainless Steel     APPLICATIONS / CHARACTERISTICS Marine Engine Cooling, Circulating, Pumping Bilges, Transfers, Washdowns, Sump Drainage, Spill Returns. Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. Self-priming from dry up to 2.4m (7.8ft).   Jabsco Flexible Impeller Pedestal Pump, 3/4" NPT Ports, 1/2" Diameter Shaft with 1/8" Key, Neoprene Impeller

Jabsco Pump Nitrl Imp 1" Face Sl   FEATURES Pump Body: Bronze Pedestal Port Size: 1" NPT, Internal Flow: Up to 27.9 GPM at 10 feet of head, 2100 RPM. Reduced cam versions have reduced flow. Pressure: Up to 26 PSI Impeller: Neoprene or Nitrile Shaft Seal: Lip Type or Mechanical Face Seal Shaft: Stainless Steel Bearings: Shielded Ball Bearings     APPLICATIONS / CHARACTERISTICS MARINE- Pump bilge, Washdowns, Circulating water in bait tanks, Utility dock-side pump, Engine cooling.     INDUSTRIAL- Circulating and transferring, Velocity mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Dilute acids, Tanning Liquors, Glycerine, Brine, etc.   FARMING- Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.   PLUMBING AND HOME EMERGENCY USE- Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.   Jabsco Flexible Impeller Pedestal Pump 1"NPT Face Seal Nitrile Impeller

Jabsco 18830-0010 Engine Cooling Pump with 6 1/2" Pulley Pump Body: Bronze Port Size: 1" ID Hose Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: Stainless Steel Pulley: 6 1/2" diameter A belt  

Jabsco 18830-1020 Engine Cooling Pump Pump Body: Bronze Port Size: 1" ID Hose Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: Stainless Steel   Jabsco  18830-1020 Engine Cooling Pump with High Pressure Impeller, 3/16" Pulley Key and No Pulley or Pulley Mounting Plate.