|
Primetime Pump 24VDC
The original Seakeeper Pump that Eliminates Boat Roll and Pitch
This pump comes with the Seakeeper connector.
The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applications where suction lift is required.
Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm).
Applications
Marine Pump used as a Fresh water pump, Air Conditioning pump, Refrigeration pump, or RO pre pump and it is Marine ignition protected motors (ISO 8846)
Agricultural pump
Industrial pump
SPECIFICATIONS:
Flow Up to 21 GPM
Head Feet Up to 23’
Housing 316 Stainless Steel (Investment Cast)
Cover 316 Stainless Steel
Impeller 316 Stainless Steel Semi-Open
Wearplate 316 Stainless Steel
Mechanical Seal Carbon / Ceramic / Viton Bellows
O-ring Flapper Viton
Weight 13 lbs
Motor is painted White
|
623.66 |
|
|
Primetime Pump 24VDC
The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applications where suction lift is required.
Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm).
Applications
Marine Pump used as a Fresh water pump, Air Conditioning pump, Refrigeration pump, or RO pre pump and it is Marine ignition protected motors (ISO 8846)
Agricultural pump
Industrial pump
SPECIFICATIONS:
Flow Up to 21 GPM
Head Feet Up to 23’
Housing 316 Stainless Steel (Investment Cast)
Cover 316 Stainless Steel
Impeller 316 Stainless Steel Semi-Open
Wearplate 316 Stainless Steel
Mechanical Seal Carbon / Ceramic / Viton Bellows
O-ring Flapper Viton
Weight 13 lbs
Motor is painted White
|
671.93 |
|
|
Primetime 115volt Pump
The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applications where suction lift is required.
Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm). Marine ignition protected motors (ISO 8846).
Applications
Marine Pump used as a Fresh water pump, Air Conditioning pump, Refrigeration pump, RO pre pump, Gyroscope stabilization cooling, Agricultural pump, and Industrial pump.
SPECIFICATIONS:
Flow………………………Up to 21 GPM
Head Feet…………….Up to 23’
Housing……………….316 Stainless Steel (Investment Cast)
Cover……………………316 Stainless Steel
Impeller……………….316 Stainless Steel Semi-Open
Wearplate……………316 Stainless Steel
Mechanical Seal… Carbon / Ceramic / Viton Bellows
O-ring/Flapper…….Viton
Weight…………………18 lbs
|
748.95 |
|
|
Primetime Pump 12VDC
The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applications where suction lift is required.
Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm). Marine ignition protected motors (ISO 8846).
Applications:
Marine Pump used for Fresh water pump, Air Conditioning pump, Refrigeration pump, RO pre pump, Gyroscope stabilization cooling
Agricultural pump
Industrial pump
SPECIFICATIONS:
Flow: Up to 21 GPM
Head Feet: Up to 23’
Housing: 316 Stainless Steel (Investment Cast)
Cover: 316 Stainless Steel
Impeller: 316 Stainless Steel Semi-Open
Wearplate: 316 Stainless Steel
Mechanical Seal: Carbon / Ceramic / Viton Bellows
O-ring/Flapper: Viton
Weight: 13 lbs
Motor is painted White
|
684.06 |
|
|
Primetime Pump 230vac
The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump.
The pump is ideal for Marine, Industrial, Agricultural or Commercial applications where suction lift is required.
Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm). Marine ignition protected motors (ISO 8846).
SPECIFICATIONS:
Flow…………………….Up to 21 GPM
Head Feet……………Up to 23’
Housing………………316 Stainless Steel (Investment Cast)
Cover………………….316 Stainless Steel
Impeller……………..316 Stainless Steel Semi-Open
Wearplate………….316 Stainless Steel
Mechanical Seal..Carbon / Ceramic / Viton Bellows
O-ring/Flapper…..Viton
Weight……………...16 lbs
|
769.39 |
|
|
Primetime SK Rebuild Kit for all Primetime Pumps
This includes the following items:
28766 Acorn Nut
36863 Seal Assy Type 8-3/8"
35025 Gasket
34350 Washer SS:Flat 1.06X.50X.09
34033-EP SS Impeller Electropolished
These items are build to order.
|
139.98 |
|
|
Primetime Hydraulic Pump
This is a high performance self-priming 316 stainless steel centrifugal pump close coupled to a hydraulic motor.
The pump is ideal for Marine, Agricultural, and Industrial applications where suction lift is required.
The Primetime Hydraulic model features all 316 stainless steel components for superior corrosion resistance when pumping chemical compounds. A carbon/ceramic/viton bellows shaft seal is standard. Ports are ¾” NPT with a 1/8" NPT fill port. The check valve flapper design enhances the self-priming capability to 12 foot suction lift.
The hydraulic motor is designed with SAE #6 ports for the tank side while the pressure side has SAE # 4 ports. Maximum Pressure is 1000 PSI. Maximum Oil Flow is 3 GPM.
SPECIFICATIONS:
Flow. . . . . . . . . . . . . . . . . . Up to 31 gpm
Head . . . . . . . . . . . . . . . . . Up to 51’
Housing. . . . . . . . . . . . .... . 316 Stainless
Steel (Investment Cast)
Cover . . . . . . . . . . . . . .... . 316 Stainless Steel (Investment Cast)
Impeller . . . . . . . . . . .... . . 316 Stainless Steel Semi-Open (Sintered PM)
Wear Plate . . . . . . .. . ... . . 316 Stainless Steel
Mechanical Seal . . . .. .. .. . . Carbon/Ceramic/Viton Bellows 150 PSI
O-ring/Flapper . . . . .. ... . . . Viton
Hydraulic Motor . . ... .. .. . . . Iron, Gerotor Type, .08 Cu. In. Displacement
Weight . . . ... . . . . . . . ... . . 12 lbs.
APPLICATIONS
• Marine
• Agricultural
• Industrial
PUMP CONSTRUCTION
• 316 Stainless Steel Investment Cast
HYDRAULIC MOTOR SPECIFICATIONS
• .08 cu. in displacement
• Max. Oil Flow: 3 GPM
• Max. Pressure: 1000 PSI
Hydraulic Motor Port Sizes:
• SAE # 4 Pressure
• SAE # 6 Tank
Pump Port Sizes:
• 3/4” NPT
• 1/8” NPT Fill Port
|
1550.70 |
|
|
March 809 BRC HS 24VDC Mag-Drive Centrifugal Pumps Bronze 24VDC High Speed 5.5GPM
The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated.
• Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries.
• Maximum liquid temperature for the 809 and 815 series is 250 F.
• Port configurations include in-line and center inlet with side discharge.
• Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic.
• There are many motor options available Including AC, DC and High Speed versions for added flow.
March Pump Mag-Drive Centrifugal Pump Bronze Center Inlet 24VDC High Speed 5.5GPM 3/4"MPT Inlet, 1/2"MPT Outlet
|
501.56 |
|
|
Yamada DP-10BAN 3/8" Aluminum Pump
DP-10BAN AIR POWERED DOUBLE DIAPHRAGM AODD PUMPS
Yamada® DP-10BAN series Air Powered Double Diaphragm (AODD) pumps provide a maximum flow rate of 6 gallons per minute (DP-10) or 8 gallons per minute (DP-15). DP-10 pumps are available in aluminum, stainless steel (316), and polypropylene, DP-15 pumps are available in either polypropylene or groundable acetal. A wide selection of diaphragm materials cover a variety of applications.
Inlet (in): 3/8
Outlet (in): 3/8
Max Flow (gpm): 6.0
Max Temp: 180
Max Solid (in): 1/32
Valve Type (in): 1/4
Air Motor Material: Aluminum
Body Material: Aluminum
Elastomer Material: Buna N
|
705.00 |
|
|
March 809 BR HS Mag-Drive Centrifugal Pump Bronze 24V Pump
The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated.
• Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries.
• Maximum liquid temperature for the 809 and 815 series is 250 F.
• Port configurations include in-line and center inlet with side discharge.
• Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic.
• There are many motor options available Including AC, DC and High Speed versions for added flow.
March Pump Mag-Drive Centrifugal Pump Bronze 24VDC High Speed 7.5GPM 1/2"MPT Ports
|
463.13 |
|
|
Yamada DP-10BPT 3/8" Poly Teflon Pump
Technical Specifications
Inlet Port: 3/8 inch
Max GPM: 6
Max PSI: 100
Outlet Port: 3/8 inch
RPM: 300Max
Temperature: 180 degrees F
PTFE Seals Polypropylene DP-10 Series Pump
The Yamada DP-10BPT Pump is an air-operated dual diaphragm pump with a maximum flow rate of 6 GPM and a maximum air pressure of 100 PSI. This AODD pump has a polypropylene body and an aluminum motor. The diaphragm, ball valve, and o-rings are made with PTFE material. Versatile pump that stands up to harsh environments.
Specifications:
6 GPM
Diaphragms: PTFE
Ball Valve: PTFE
O-Rings: PTFE
Inlet and Outlet Ports: 3/8" Female NPT
Air Inlet: 1/4" Female NPT (includes ball valve)
Air Exhaust: 3/8" Female NPT (includes silencer)
Maximum Liquid Temperature: 180° Fahrenheit
Air Supply Pressure: 20 to 100 PSI (1.4 to 7 kgf/cm_)
Maximum Solid: 1/32"
Maximum Suction Life: 10 feet
RPM: 300 (cycle speed)
Applications:
Car Wash
Washing/Cleaning Systems
Chemical Delivery/Transfer
Gas/Petroleum
Paints/Dyes
Mining
Printing/Ink
Stone/Clay/Glass
Water Treatment
|
615.00 |
|
|
Yamada DP-10BPH 3/8" Poly-Hytrel Pump
Port Size: 3/8"
NPTBody Material: Polypropylene
Diaphragm Material: Hytrel
Maximum Flow Rate: 6 GPM
Maximum Discharge Pressure: 100 PSI
Fluid Port: 3/8" NPT
GPM: 6
Discharge Volume per Cycle: 0.020 gallons
Air MotorAluminum
Intake & Discharge Connections
Polypropylene (PPG): 3/8" Female NPT
Aluminum (ADC-12): 3/8" Female NPT
Stainless Steel (316): 3/8" Female NPT
Air Inlet: 1/4" Female NPT (includes ball valve)
Air Exhaust: 3/8" Female NPT (includes silencer)
|
565.00 |
|
|
No matter whether you are an experienced boater looking for a replacement pump or a manufacturer specifying pumps for your marine application, we are prepared to provide you with the support you need. And no matter where you work or live, access to our products, services, spare parts and support are never far away. In fact, you will find SPX FLOW's Johnson Pump marine brand represented in every major industrial country of the world today and in more than sixty nations altogether.
SHOP JOHNSON PUMP
The Aqua Jet five chamber diaphragm pump provides the perfect water pressure or deck wash solution for both small and medium sized leisure and commercial boats as well as mobile homes, campers and summer homes.
Quiet and pulsation-free even at low speeds. Efficient and compact, Aqua Jet pumps are particularly suitable where low amperage and sound levels in relation to water flow are placed at a premium-such as in shower and galley applications. Integrated pressure switch turns pump on and off automatically when tap is opened and closed. Operates in fresh or sea water.
SHOP THE Aqua Jet five chamber diaphragm pump
Specials Closeouts Remanufactured Rebates
|
|
|
Yamada K10-PT Kit Dp-10 Bpt
|
192.27 |
|
|
Johnson 10-24504-04 24Vdc Magnetic Drive Centrifugal Pump
Johnson CM30P7-1
A line of compact Magnetic Driven centrifugal pumps, the CM30P7-1 models combine high flow rates with very low electric current consumption, making them ideally suited for circulating water in live fish tanks or heating and cooling systems in buses and limousines.
Designed for continuous operation with water or water/glycol mixture (maximum 60% glycol).
Not Warrantied For Salt Water Use But We Have Seen Customers Use Them For Salt Water.
Liquid temperature: Minimum -40F (-40C), Maximum +212F (+100°C), do not allow water to freeze inside pump.
Pump Body: PPA Thermoplastic
Port Size: 5/8" (16mm) Hose or 3/4" (20mm) Hose Depending on the Model
Flow: From 4.0 GPM (15 L/Minute) up to 6.9GPM (26 L/Minute) Depending on the Model
Impeller: PPS Thermoplastic
Shaft: Stainless Steel
Housing O-Ring: EPDM
Motor: 24 VDC Enclosed Permanent Magnet, Ball Bearing, Continuous Duty.
Up To 5000 Hour Motor Life.
IP67 Rating, Weather-Proof and Dust-Proof, Not Submersible.
Maximum 27 Watt Draw on CM30 Models.
|
198.59 |
|