Spare Bow Mount Base Kit - Black - Powder Coat If you want to mount your bow bracket in more than one location you can purchase additional base plates to make relocating your bracket easy and clean.

Spare Bow Mount Base Kit - Clear - Anodized If you want to mount your bow bracket in more than one location you can purchase additional base plates to make relocating your bracket easy and clean.

MKA-50 Bow-Mount Stabilizer Kit for Fortrex Features: Reduces motor bouncing when in stowed position Attaches to the left or right side of bowguard Pivots into vertical position and rests on the boat deck when motor is stowed Rotates in the horizontal position with bowguard when the motor is deployed Includes rubber bumper to protect deck finish Stainless steel hardware tested for saltwater use Fits any Fortrex or Riptide SF bow-mount trolling motor WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

6" Quick Release Bow Mount Bracket - Black - Powder Coat With a quick pull of the plunger pin and a short twist, the bracket can be removed leaving only the mounting plate for a clean, obstacle-free deck. Includes integrated O-rings eliminating the need for sealant. Available in 3" or 6" rise for safe and easy gunnel clearance. Clear anodized or black powder coat. Mounting hardware included. Features: Available in 3" or 6" rise for safe and easy gunnel clearance Clear anodized or black powder coat Mounting hardware included Quick and easy installation

3" Quick Release Bow Mount Bracket - Black - Powder Coat With a quick pull of the plunger pin and a short twist, the bracket can be removed leaving only the mounting plate for a clean, obstacle-free deck. Includes integrated O-rings eliminating the need for sealant. Available in 3" or 6" rise for safe and easy gunnel clearance. Clear anodized or black powder coat. Mounting hardware included. Features: Available in 3" or 6" rise for safe and easy gunnel clearance Clear anodized or black powder coat Mounting hardware included Quick and easy installation

2.5" Set Back Transom Mount Bracket - Black - Powder Coat All anchor brackets are equipped with proprietary, integrated pole lock. Just flip the lever to secure the pole in the bracket while in motion. Leave unlocked while anchored. Designed for quick and simple installation. Features: Black Powder Coat finish Leave unlocked while anchored Sturdy, durable marine-grade material Designed for quick and simple installation

5" Set Back Transom Mount Bracket - Black - Powder Coat Panther KPS50B Transom Mount Brackets comes as a length of 5" and built from quality and durable materials for use in marine environments. Signature Pole LockAll brackets are equipped with a proprietary, integrated pole lock. Just flip the lever to secure the pole in the bracket. No loose parts that can fall in the water. Features: No loose parts that can fall in the water Anodized material Signature Pole LockAll brackets are equipped with a proprietary, integrated pole lock Quick and easy installation

Primus Wheel 13.5" Black 3/4" Tapered Shaft with Knob Finger Grips - Black Powder Coat Few components on a boat are touched as frequently as its steering wheel. That’s why Schmitt Marine designed Primus, its cast stainless steel steering wheel, to deliver maximum ergonomic all-day comfort and engineered it for long-lasting, uncompromising durability. The visually striking wheel complements any helm and comes with a lifetime warranty. The Primus is manufactured using a unified investment casting, including the integrated ring, for massive strength. NMMA type-accepted and CE certified, it’s so strong, it greatly exceeds ABYC P-22 and ISO 8848 standards. Polished to a mirror-like finish, the 316L stainless steel provides superior corrosion resistance and has minimal maintenance needs. Available in 13.5″ and 15.5″ diameters, the rim is slightly thicker than most other wheels. At 1–1/8″, the larger size lessens the hand fatigue that’s common with thinner styles. UV-resistant black Santoprene™ rubber provides all-weather control and comfort, and a dramatic counterpoint to the gleaming stainless steel. Underneath, finger grips deliver a sure, solid grip. It extends through the top of the rim, providing an additional gripping surface. The contiguous piece of Santoprene also extends slightly under the spoke junction for a smooth, ergonomic fit. The result is an attractive wheel that matches any helm décor. The Primus is available in three spoke configurations: slotted with decorative Santoprene inserts, open slots, or solid. Edges have a slight radius for comfort, without sacrificing their markedly defined appearance. The optional stainless steel Control Knob is large and comfortable. It’s installed on a spoke, 3/4″ from the rim edge, to ensure it won’t interfere with any controls or the driver’s helm space. The installation has no visible protruding fasteners to catch clothing or hinder the smooth tactile experience. Schmitt designed the knob with glass ball bearings to eliminate corrosion and provide a lifetime of free-spinning. The Primus incorporates the industry standard 3/4″ tapered hub. The durable stainless steel center nut works with all steering systems, with optional styles available. Features: Black Powder Coat Diameter: 13.5" 3/4" Tapered Shaft with knob finger grips

Cable Seal with Cover - Black Powder Coated - Stainless Steel Wire - Size 2-10mm The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation. Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note: *All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Cable Seal with Cover - Black Powder Coated - Stainless Steel Wire - Size 2-15mm The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation. Features: No need to remove connectors -  The split seal design eliminates the need to remove cable connectors during installation Watertight installation -  Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note: *All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Deluxe Stainless Steel Wiper Blade - 11" - Black Powder Coated This deluxe stainless steel blade is black powder-coated with a natural rubber blade. It also has replaceable blade inserts that are packed with three adapters to fit Schmitt Marine's Ongaro Deluxe Arms and most competitive arms.  Specifications: Length: 11 in.

Deluxe Stainless Steel Wiper Blade - 16" - Black Powder Coated This deluxe stainless steel blade is black powder-coated with a natural rubber blade. It also has replaceable blade inserts that are packed with three adapters to fit Schmitt Marine's Ongaro Deluxe Arms and most competitive arms.  Specifications: Length: 16 in.

Deluxe Stainless Steel Wiper Blade - 18" - Black Powder Coated This deluxe stainless steel blade is black powder-coated with a natural rubber blade. It also has replaceable blade inserts that are packed with three adapters to fit Schmitt Marine's Ongaro Deluxe Arms and most competitive arms.  Specifications: Length: 18 in.

Deluxe Stainless Steel Wiper Blade - 20" - Black Powder Coated This deluxe stainless steel blade is black powder-coated with a natural rubber blade. It also has replaceable blade inserts that are packed with three adapters to fit Schmitt Marine's Ongaro Deluxe Arms and most competitive arms.  Specifications: Length: 20 in.

Deluxe Stainless Steel Wiper Blade - 22" - Black Powder Coated This deluxe stainless steel blade is black powder-coated with a natural rubber blade. It also has replaceable blade inserts that are packed with three adapters to fit Schmitt Marine's Ongaro Deluxe Arms and most competitive arms.  Specifications: Length: 22 in.