6" Quick Release Bow Mount Bracket - Clear - Anodized With a quick pull of the plunger pin and a short twist, the bracket can be removed leaving only the mounting plate for a clean, obstacle-free deck. Includes integrated O-rings eliminating the need for sealant. Available in 3" or 6" rise for safe and easy gunnel clearance. Clear anodized or black powder coat. Mounting hardware included. Features: Available in 3" or 6" rise for safe and easy gunnel clearance Clear anodized or black powder coat Mounting hardware included Quick and easy installation

3" Quick Release Bow Mount Bracket - Clear - Anodized With a quick pull of the plunger pin and a short twist, the bracket can be removed leaving only the mounting plate for a clean, obstacle-free deck. Includes integrated O-rings eliminating the need for sealant. Available in 3" or 6" rise for safe and easy gunnel clearance. Clear anodized or black powder coat. Mounting hardware included. Features: Available in 3" or 6" rise for safe and easy gunnel clearance Clear anodized or black powder coat Mounting hardware included Quick and easy installation

6" Quick Release Bow Mount Bracket - Black - Powder Coat With a quick pull of the plunger pin and a short twist, the bracket can be removed leaving only the mounting plate for a clean, obstacle-free deck. Includes integrated O-rings eliminating the need for sealant. Available in 3" or 6" rise for safe and easy gunnel clearance. Clear anodized or black powder coat. Mounting hardware included. Features: Available in 3" or 6" rise for safe and easy gunnel clearance Clear anodized or black powder coat Mounting hardware included Quick and easy installation

3" Quick Release Bow Mount Bracket - Black - Powder Coat With a quick pull of the plunger pin and a short twist, the bracket can be removed leaving only the mounting plate for a clean, obstacle-free deck. Includes integrated O-rings eliminating the need for sealant. Available in 3" or 6" rise for safe and easy gunnel clearance. Clear anodized or black powder coat. Mounting hardware included. Features: Available in 3" or 6" rise for safe and easy gunnel clearance Clear anodized or black powder coat Mounting hardware included Quick and easy installation

3" Quick Release Bow Mount Bracket - Camo With a quick pull of the plunger pin and a short twist, the bracket can be removed leaving only the mounting plate for a clean, obstacle-free deck. Includes integrated O-rings eliminating the need for sealant. Available in 3" or 6" rise for safe and easy gunnel clearance. Clear anodized or black powder coat. Mounting hardware included. Features: Available in 3" or 6" rise for safe and easy gunnel clearance Clear anodized or black powder coat Mounting hardware included Quick and easy installation

5" Set Back Transom Mount Bracket - Clear - Anodized Panther KPS50A Transom Mount Brackets comes a length of 5" and built from quality and durable materials for use in marine environments. Signature Pole LockAll brackets are equipped with a proprietary, integrated pole lock. Just flip the lever to secure the pole in the bracket. No loose parts that can fall in the water. Features: No loose parts that can fall in the water Anodized material Signature Pole LockAll brackets are equipped with a proprietary, integrated pole lock Quick and easy installation

10' King Pin Anchor Pole - 2-Piece - Black Panther Marine's KPP100B King Pin Anchor Poles feature a pool-cue-style stainless steel butt collar for quick breakdown and easy storage or transport. Constructed of 3/4 in. Dia, high-impact fiberglass. Equipped with molded foam grips and stainless steel tips to protect the pole while allowing easy bottom penetration. Rubber storage clips with mounting screws included. (8 ft., single-piece pole also available). Features: 2-piece poles feature a pool-cue-style stainless steel butt collar for quick breakdown Easy to store and transport Constructed of 3/4 in. Dia, high-impact fiberglass Equipped with molded foam grips

Trim Tab Mounting Bracket for SCM-6 - Supports One Light Trim Tab Mounting Brackets Shadow-Caster Trim Tab SCM-TT mounting brackets are the ultimate in mounting accessories for our SCM-4 , SCM-6 and SCM-10 size lights. When your boat cannot support the lights on the transom or you need more light, your Trim Tab will work just as well. Each size is packaged with all the mounting hardware required. They are perfect for adding more light to the transom of your boat, and also work well for customers who may not want to install Shadow-Caster lights on their boat's transom. The bracket is designed to allow for the same great spread and brightness as Shadow-Caster lights mounted on the transom. Specifications: SCM-TT-6: 7.2" Length (183mm) 316 Stainless Steel Materials 1-Year Warranty Made in the USA WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Spare Bow Mount Base Kit - Clear - Anodized If you want to mount your bow bracket in more than one location you can purchase additional base plates to make relocating your bracket easy and clean.

MKA-64 Quick Release Bracket Easily remove your electric steer and bow-mount trolling motor. High-yield composite construction is super strong, impervious to corrosion, and specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (padlock not included; sold separately). NOTE: Recommended for 112 lb. thrust and 72" shaft trolling motors. Features: Designed to meet the increased stress created by high-thrust motors and long shaft lengths Allows bow-mount trolling motors to be quickly mounted and/or removed from the boat deck The low-profile design attaches the trolling motor to the top bracket and drops in over the deck-mounted puck Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration The locking handle can be secured with a padlock (not included) for additional security Designed for use in freshwater

MKA-21 Composite Quick Release Bracket Easily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).NOTE: Not for use with 72" shaft length motors.  Features Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Includes stainless steel mounting hardware and locking pin Locking handle can be secured with padlock (not included) for additional security Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40 NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer. Instead use the MKA-53 model. Designed for use in freshwater WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RTA-55 Quick Release Bracket Easily remove your electric-steer, bow-mount trolling motor featuring QUEST technology. High-yield composite construction is super strong and impervious to corrosion and specifically designed for higher thrust motors and longer shaft lengths. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).  Designed specifically for motors featuring QUEST technology to meet the increased stress created by high thrust motors and long shaft lengths Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck Low-profile design attaches trolling motor to top bracket and drop in over deck-mounted puck Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration Locking handle can be secured with padlock (not included) for additional security Compatible with electric steer motors featuring QUEST technology Designed for use in freshwater or saltwater

MKA-56 Quick Release Bracket Easily remove your electric steer, bow-mount trolling motor featuring QUEST technology. High-yield composite construction is super strong and impervious to corrosion and is specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. The locking handle with stainless steel pins can be secured with a padlock (padlock not included, sold separately). Features: Designed specifically for motors featuring QUEST technology to meet the increased stress created by high-thrust motors and long shaft lengths Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck Low-profile design attaches trolling motor to top bracket and drop in over deck-mounted puck Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration Locking handle can be secured with padlock (not included) for additional security Compatible with electric steer motors featuring QUEST technology Designed for use in freshwater or saltwater

RTA-62 Quick Release Bracket Easily remove your electric steer, bow-mount trolling motor. High-yield composite construction is super strong, impervious to corrosion, and specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (padlock not included; sold separately). NOTE: Recommended for 112 lb. thrust and 72" and 87" shaft trolling motors. Features: Designed to meet the increased stress created by high-thrust motors and long shaft lengths Allows bow-mount trolling motors to be quickly mounted and/or removed from the boat deck The low-profile design attaches the trolling motor to the top bracket and drops in over the deck-mounted puck Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration The locking handle can be secured with a padlock (not included) for additional security. Designed for use in freshwater or saltwater

Trolling Motor Mount for MK, Garmin, Rhodan, & Power Pole The Sea Swivel is a heavy-duty marine-grade pivoting bracket designed to maneuver a trolling motor in the correct position while being deployed. This bracket also has the benefit of being able to adjust the stowed position to match the angle of any boat. That means no more anchor hatches covered up and no more trolling motorheads hanging off the side of the boat. All that is needed is an 8" x 8" flat mounting surface and access under the gunwale to tighten the nut. During installation, it is recommended that users apply teff-gel or marine-grade grease to the main bolt threads and the bearing assembly. Features: Maneuverability and Positioning The Sea Swivel offers a heavy-duty pivoting bracket that allows users to easily maneuver the trolling motor into the correct position while deployed. This is especially useful for maintaining proper control and direction while fishing or navigating in different conditions. Adjustable Stowed Position The ability to adjust the stowed position of the trolling motor to match the angle of the boat is a significant advantage. This means that the trolling motor won't interfere with anchor hatches or hang off the side of the boat when not in use, enhancing the boat's aesthetics and functionality. High-Quality Materials The use of 7075T6 aluminum alloy, commonly found in the aerospace industry, provides peak strength and ensures the Sea Swivel's durability. This material choice suggests that the product is designed to withstand the rigors of marine environments and provide longevity. Corrosion Resistance The anodized finish is designed to protect the Sea Swivel from the harsh marine environment, which typically includes exposure to saltwater and other corrosive elements. This coating enhances the product's ability to resist rust and other forms of corrosion over time. Stainless Lock Pin and Hardware The utilization of all 316 stainless lock pins and mounting hardware further enhances the product's resistance to corrosion, as 316 stainless steel is known for its exceptional corrosion resistance properties, making it well-suited for marine applications. Backing Plate for Strength The inclusion of a pre-cut backing plate to be placed under the mounting surface is a smart design choice. This additional plate strengthens the installation area, reducing the risk of damage or failure due to stress or strain over time. Easy Installation The patent-pending design and single-bolt mounting system contribute to streamlined installation processes. This can be a significant selling point for customers, as it saves time and effort during setup. *It is recommended that users apply teff-gel or marine-grade grease to the main bolt threads and the bearing assembly. Compatibility The Sea Swivel stands out as a versatile solution seamlessly accommodating many makes, models, and sizes of trolling motors. It makes installation a breeze and comes pre-drilled for the quick-release brackets listed below: Minn Kota RTA 54/62 (fits all 36V permanent magnet motors) Minn Kota RTA 55/56 (fits all new Brushless/Quest motors) Minn Kota RTA17 (fits all 24V motors for smaller units) Also fits quick-release mounts for the *Garmin Kraken 24v/36v Rhodan large mount 6 bolt 36v 96/108 Rhodan smaller mount 4 bolt 24v Power Pole Move PV 36V/24V Lifetime Warranty Sea Swivel offers a limited lifetime warranty. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.