Marine Outboard Motor Bracket - Aluminum - Max 20HP This adjustable outboard motor bracket is designed for motors up to 20 HP or 115 lbs. Its heavy-duty, light weight aluminum is designed for fresh water use on both powerboats and sail boats. Unit is spring loaded. 11 in. of travel with 5 stops.( Not to be used with 4 stroke engines.) Features: Lightweight design Sturdy, durable aluminum Travel distance of bracket is 11 in. with 5 stops Spring-loaded bracket

Marine Outboard Motor Bracket - Aluminum - Max 15HP 4-Stroke Adjustable outboard motor bracket is designed for 2- and 4-stroke motors up to 15 HP or 132 lbs. Constructed of hard-coat anodized aluminum and hand adjustable with the turn of a knob. Stainless steel torsion springs counterbalance the motor weight making adjustments a breeze. 10" of travel and 5 vertical running positions let you fine tune the motor height for optimal performance. Meets ABYC Standards. (Do not use without Panther 55-0415 safety cable—included.)

Marine Outboard Motor Bracket - Aluminum - Fixed 25HP Features: The fixed kicker motor bracket is designed for adjustable mount on the transom. Designed for the heavier 4-stroke motors. 5" height adjustment will accommodate long- and short-shaft motors. 8 1/2” setback - weighs 13lbs.

Outboard Motor Bracket - Aluminum - Max 12HP Adjustable outboard motor bracket is designed for motors up to 12hp or 82lbs. This light weight aluminum bracket is designed for freshwater use on both powerboats and sail boats. Features: Same design as the 55-0021. This heavy duty, lightweight aluminum bracket is designed for motors up to 12hp or 82lbs max weight Spring loaded (14”of travel with 5 stops)  Do not use without Panther safety cable 55-0415—NOT included) Not to be used with 4 stroke engines

Marine Outboard Motor Bracket - Stainless Steel - Fixed 35HP Features: Works with 4- and 2-Stroke motors up to 35hp and 263 lbs max weight (119kg). Rugged Polypropylene mounting board (2" [5cm] thick).  Includes stainless steel mounting hardware and safety cable. (Do not use without safety cable)

Marine Outboard Motor Bracket - Stainless Steel - Fixed 15HP Features: For engines up to 12hp and 85 lbs max weight (39kg). Heavy-duty Stainless Steel. Rugged Polypropylene mounting board (2" [5cm] thick). Includes mounting hardware. recommend using safety cable— not included

Swim Platform Outboard Motor Bracket Built extra-tough and extra-wide for auxiliary motors. The mounting board is 2” thick weatherproof and maintenance-free polypropylene. Adjustable for long or short shaft engines. Position trim adjustment available by moving bolts on bracket. Rated for outboards up to 20 HP. Features: Adjustable outboard motor bracket designed to mount on most swim platforms Rated for 2- and 4- stroke motors up to 20HP Constructed of black powder-coated aluminum and can be adjusted to fit most platform heights and motor shaft lengths for optimum prop depth and performance Comes complete with a transom support bar for weight support and torque resistance Do NOT use without Panther 55-0415 safety cable – included

Outboard Motor Bracket - Stainless Steel - Max 10HP Stainless Steel Outboard Motor Bracket Up to 10 horse power. The Adjustable outboard motor bracket is stainless steel construction and non-corrosive for saltwater use. Designed for use with power or sail boats. Manual operation means no power required to raise and lower your auxiliary outboard motor. Features Stainless Steel Construction Fits Motors up to 10 horse power at 110 pounds.14" travel.

Outboard Safety Cable Stainless Steel for Motor Bracket Features: Braided, stainless steel cable, plastic coated for protection. For use with all outboard motor brackets to secure the motor to your boat. *All Panther 4-stroke brackets come with Panther safety cable.

Trolling Motor Bracket Raymarine's Trolling Motor Bracket is made specifically for Raymarine's Dragonfly Transducer.

Trolling Motor Bracket Trolling Motor Bracket specifically designed for the Dragonfly CPT-DV and CPT-DVS transom mount transducers.

Outboard Motor Lock Features: The Panther Outboard Lock is a heavy carbon steel design and fits turnbuckle-mounted engines It has a recessed solid brass lock and noise dampeners that reduce rattle

HD Turnbuckle Outboard Motor Lock Features: This outboard lock fits the turnbuckle design and has anti-theft by drill protection Constructed of high strength 300 series marine grade stainless steel Includes noise dampeners to reduce rattle Complete with two security keys that cannot be duplicated

Replacement Outboard Tilt Trim Motor & Reservoir Only - Mercury/Mariner & Force Motor Replacement outboard tilt trim motor and reservoir that will fit late model Mercury /Mariner, Force 40-125 HP outboards w/single ram, 2-wire connection, 4-bolt mount, Hollow-hex shaft, (Motor/Reservoir Only) Includes stainless steel mounting screws, shaft adaptor, O-ring and fill plug. Bullet Connector Terminal Ends. ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor. Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: MERCURY Tilt Trim Motor 19217A1 MERCURY Tilt Trim Motor 19217A5 MERCURY Tilt Trim Motor 809885A1 MERCURY Tilt Trim Motor 809885A2 MERCURY Tilt Trim Motor 809885T2 MERCURY Tilt Trim Motor 811674 MERCURY Tilt Trim Motor 813447 MERCURY Tilt Trim Motor 818903A1 MERCURY Tilt Trim Motor 819479A1 MERCURY Tilt Trim Motor 8197480A1 MERCURY Tilt Trim Motor 819762A4 MERCURY Tilt Trim Motor 19762A5 MERCURY Tilt Trim Motor 19762A6 MERCURY Tilt Trim Motor 19762A7 MERCURY Tilt Trim Motor 1977A8 MERCURY Tilt Trim Motor 1977A9 MERCURY Tilt Trim Motor 22870A1 MERCURY Tilt Trim Motor 30250A3 MERCURY Tilt Trim Motor 30250T3 MERCURY Tilt Trim Motor 2021A1 MERCURY Tilt Trim Motor 32021T1 MERCURY Tilt Trim Motor 32021A2 MERCURY Tilt Trim Motor 32021T2 MERCURY Tilt Trim Motor 55654A1 MERCURY Tilt Trim Motor 55654T2 MERCURY Tilt Trim Motor 893907A02 SIERRA Tilt Trim Motor 18-6777 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Original Equipment Quality Replacement Tilt Trim Motor for Mercury/Mariner Outboards with Design II 3 RAM Replacement outboard tilt trim motor that will fit Mercury/Mariner outboards w/Design II 3 ram, three-wire trim units, Hollow-hex shaft W/AFT FILL RESERVOIR, 3-wire connection, 2-bolt mount, Shaft adaptor, and O-ring included, Ring Terminal Ends.  ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor. Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: MERCURY Tilt Trim Motor 811628 MERCURY Tilt Trim Motor 828708A1 MERCURY Tilt Trim Motor 878265A6 SIERRA Tilt Trim Motor 18-6774 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.