|
Oil Extractor 2.5L Capacity - DIY Series
These compact, powerful pumps make oil changes fast, efficient and clearner than you ever thought possible. They take less than 10 seconds to prime and have see-through calibrated containers for quick visual reference of oil level. Non-kinking, flexible metallic extractor tubes. Model 75-6060 has a large 6-liter capacity to meet the needs of most boaters. Model 75-6025 is a down-sized, 2.5-liter version of the 6000 that’s perfect for four-strokes up to 50hp and sailboats with small engines.
Note: Not for use with flammable products.
|
49.13 |
|
|
Oil Extractor 6.5L Capacity - Pro Series
Mid-Size container for smaller jobs and tighter areas. The heavy duty construction makes this extractor perfect for shop use for the mobile service professional. Safe, no-Spark hand operation. Check valve for easy release of displaced air in container. Extra long 48" hoses with fittings included for almost any extraction application. Newly designed decompression valve to release negative pressure. See-through container for quick visual reference. Convenient foot board for added stability while in operation. Pour spout for no-mess fluid disposal. Suitable for engine oil, gear lube, brake fluid, coolant, water etc.
Note: Not for use with Flammable or Corrosive products.
|
95.56 |
|
|
Oil Extractor 6L Capacity - DIY Series
These compact, powerful pumps make oil changes fast, efficient and clearner than you ever thought possible. They take less than 10 seconds to prime and have see-through calibrated containers for quick visual reference of oil level. Non-kinking, flexible metallic extractor tubes. Model 75-6060 has a large 6-liter capacity to meet the needs of most boaters. Model 75-6025 is a down-sized, 2.5-liter version of the 6000 that’s perfect for four-strokes up to 50hp and sailboats with small engines.
Note: Not for use with flammable products.
|
68.83 |
|
|
Oil Extractor 15L Capacity - Pro Series
High capacity accommodates larger 4-stroke engines. The heavy duty construction makes this extractor perfect for shop use or the mobile service professional. Safe, no-Spark hand operation. Check valve for easy release of displaced air in container. Extra long 48" hoses with fittings included for almost any extraction application. Newly designed decompression valve to release negative pressure. See-through container for quick visual reference. Convenient foot board for added stability while in operation. Pour spout for no-mess fluid disposal. Suitable for engine oil, gear lube, brake fluid, coolant, water etc.
Note: Not for use with Flammable or Corrosive products.
|
137.14 |
|
|
Oil Extractor 15L Capacity Pro Series with Pneumatic Fitting
Easy to use for do-it-yourself applications, but heavy-duty construction will stand up for shop use or mobile service professionals. A built-in check valve allows easy release of displaced air and the decompression valve releases negative pressure. See-through container for quick reference and a built-in pour spout for no-mess disposal. 48" hoses with fittings included. Suitable for engine oil, gear lube, brake fluid, coolant, etc. Not for use with flammable or corrosive products. Can be operated manually or attached to a compressor and features a 40-170 psi working range and 1/4" air inlet.
|
172.56 |
|
|
Groco P-9014 TFE Impeller (Set Of 2)
|
212.94 |
|
|
Cat Pumps Crankcase Oil -Twin 2.5 Galllon Containers
Cat Pumps custom blend crankcase oil is exclusively designed, tested and proven to maximize the life of your Cat Pump. This special formulated premium-grade, petroleum-based, ISO 68 hydraulic oil contains the most advanced additive package to protect against wear, oxidation, rust and corrosion. Model 6105 contains 2 2.5 gallon containers.
|
253.50 |
|
|
Cat Pump 6102 Crankcase Oil-Ind 2.5 Gal
Cat Pumps custom blend crankcase oil is exclusively designed, tested, and proven to maximize the life of your Cat Pump. This specially formulated premium-grade, petroleum-based, ISO 68 hydraulic oil contains the most advanced additive package to protect against wear, oxidation, rust, and corrosion. Model 6102 contains one 2.5 gallon container.
|
139.43 |
|
|
Hydra-Cell A01-114-3442 Oil 40W 2-1/2 Gallon
|
182.00 |
|
|
Groco P-9015 Neoprene Shaft Seal 1/2"
|
7.02 |
|
|
Groco P-9009 Carbon Brg Set Of 2
|
137.74 |
|
|
Groco P-7005 Coupling &Amp; Spyder 1/2" Shft
|
174.07 |
|
|
Original Equipment Quality Replacement Tilt Trim Motor for Late Model Volvo Penta with Oildyne Pump - 2 Wire
Replacement tilt trim motor that will fit 6227, Late model Volvo Penta, w/Oildyne pump, 2-wire connection.
ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.
Features:
Tilt trim motors are dynamically tested to ensure out-of-the-box performance
Motor shafts induction case hardened at bearing surfaces for superior wear resistance
Epoxy Powder coated for maximum insulation protection
Warranty Information:
When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications.
Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration
Replaces:
VOLVO Tilt Trim Motor 3151278
VOLVO Tilt Trim Motor 3858071
VOLVO Tilt Trim Motor 854525-3
SIERRA Tilt Trim Motor 18-6805
SIERRA Tilt Trim Motor 18-6817
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
131.58 |
|
|
Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow.
Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available.
All-new sleek, modern design.
First all modular system - extremely versatile.
Easy to select and install for any radar, dome, light or camera combination.
Easy to add accessories.
Upgradable for future additions and modifications.
Powder coated aluminum construction
Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer.
The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."
See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )
Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.
SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686
|
|
|
Haight Pump 3E-001000 3E Pump Hd Hot Oil Tang Dr
Specifications
Capacity range is: Up to Capacity Max
Construction Material: Gray Iron
Capacity (max): 3 gpm
Pump Speed: 1740 RPM
E Series - Positive Displacement Pump
The E - Series positive displacement pumps are an economical, high performance modification to our D - Series models. These pumps are particularly well suited for use in direct drive, hub mounted configurations where size, weight, and cost are crucial performance criteria in an application. The rugged simplicity of the E - Series is proven thousands of times every year in high temperature applications through-out the world.
|
508.11 |
|