|
Ultramarine 7.7" Speakers - Smoke
Polk's Ultramarine speakers are designed to produce maximum sound in marine applications. Featuring "Air Suspension" technology and high-temperature voice coils, the Ultramarine family of speakers will crank up to 200 watts.
These powerful 7.7" marine speakers have rugged, removable sport grilles that stand up to sunlight and moisture. Also included is LED lighting built into the cone of the speaker.
Underneath, you'll find UV-treated silver polypropylene cones, durable surrounds, and cast aluminum baskets.
Features:
Air Suspension Design
Cast Aluminum Basket
High Temp Voice coil
Snap On Grille Installation Option
Technical Specifications:
1" Titanium dome tweeter
Sensitivity - 90.2dB
Max Power - 200W
100 Watts RMS
Cut-out Dimensions - 6-1/4"
Mounting Depth - 3-1/6"
In the Box:
Two (2) - 2 way speakers
Two (2) Trim rings
Mounting hardware
Installation manual
∗Sold in pairs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
181.19 |
|
|
Ultramarine 7.7" Speakers - Black
Polk's Ultramarine speakers are designed to produce maximum sound in marine applications. Featuring "Air Suspension" technology and high-temperature voice coils, the Ultramarine family of speakers will crank up to 200 watts.
These powerful 7.7" marine speakers have rugged, removable sport grilles that stand up to sunlight and moisture. Also included is LED lighting built into the cone of the speaker.
Underneath, you'll find UV-treated silver polypropylene cones, durable surrounds, and cast aluminum baskets.
Features:
Air Suspension Design
Cast Aluminum Basket
High Temp Voice coil
Snap On Grille Installation Option
Technical Specifications:
1" Titanium dome tweeter
Sensitivity - 90.2dB
Max Power - 200W
100 Watts RMS
Cut-out Dimensions - 6-1/4"
Mounting Depth - 3-1/6"
In the Box:
Two (2) - 2 way speakers
Two (2) Trim rings
Mounting hardware
Installation manual
∗Sold in pairs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
251.94 |
|
|
Signature Series Flush Mount Kits - 7.7" Speakers
Designed with sleek and minimalistic design aesthetics, the Fusion Signature Series flush mount kits allow you to install Signature Series 3i classic-style speakers with a premium near-flat finish – mounting profile no thicker than 2 mm [0.08”].
The flush mount kit features a non-intrusive mounting system for easy installation. Simply place the kit into the cutout, then place the speaker (sold separately) into the kit, tighten the screws, and the tabs will tighten against the panel, keeping it in place without the need to create any screw holes in your boat.
Compatible With:
Signature Series 3i 7.7" Classic Speakers
Technical Specifications:
Mounting Diameter Clearance - 8.46" (21.5 cm)
Mounting Depth Clearance - 4.41" (1.2 cm)
In the Box:
Two (2) flush mount baskets
Two (2) grilles
Mounting template
Documentation
*Sold as a Pair
|
81.56 |
|
|
Speaker Spacer for FUSION FR7022 - 7" Speakers - .50" - White
Don't have enough depth to install your speaker/subwoofer? Problem solved these spacer rings give you that extra space needed to mount your speaker/subwoofer.
Specifications:
Thickness - .50"
Edge - 1/16" Round
Outer Diameter - 7.69" or 195 mm
Bolt Hole Diameter - 6.75" or 171 mm
Mounting Hole Diameter - 6.13" or 156 mm
Compatible With:
MS-FR7022
*Sold as a Pair
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
29.26 |
|
|
Speaker Spacer for FUSION FR7022 - 7" Speakers - .50" - Black
Don't have enough depth to install your speaker/subwoofer? Problem solved these spacer rings give you that extra space needed to mount your speaker/subwoofer.
Specifications:
Thickness - .50"
Edge - 1/16" Round
Outer Diameter - 7.69" or 195 mm
Bolt Hole Diameter - 6.75" or 171 mm
Mounting Hole Diameter - 6.13" or 156 mm
Compatible With:
MS-FR7022
*Sold as a Pair
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
29.26 |
|
|
Speaker Spacer for FUSION SG-FL772 - 7.7" Speakers - .25" - White
Don't have enough depth to install your speaker/subwoofer? Problem solved these spacer rings give you that extra space needed to mount your speaker/subwoofer.
Specifications:
Thickness - .25"
Edge - 1/16" Round
Outer Diameter - 7.75" or 197 mm
Bolt Hole Diameter - 6.94" or 176 mm
Mounting Hole Diameter - 6.14" or 156 mm
Compatible With:
SG-F772SPW, SG-FL772SPC and SG-CL77SPC
*Sold as a Pair
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
27.22 |
|
|
Speaker Spacer for FUSION SG-FL772 - 7.7" Speakers - .50" - Black
Don't have enough depth to install your speaker/subwoofer? Problem solved these spacer rings give you that extra space needed to mount your speaker/subwoofer.
Specifications:
Thickness - .50"
Edge - 1/16" Round
Outer Diameter - 7.75" or 197 mm
Bolt Hole Diameter - 6.94" or 176 mm
Mounting Hole Diameter - 6.14" or 156 mm
Compatible With:
SG-F772SPW, SG-FL772SPC and SG-CL77SPC
*Sold as a Pair
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
29.26 |
|
|
Speaker Spacer for FUSION SG-F772W - 7.7" Speakers - .50" - Black
Don't have enough depth to install your speaker/subwoofer? Problem solved these spacer rings give you that extra space needed to mount your speaker/subwoofer.
Specifications:
Thickness - .50"
Edge - 1/16" Round
Outer Diameter - 8.69" or 221 mm
Bolt Hole Diameter - 6.94" or 176 mm
Mounting Hole Diameter - 6.14" or 156 mm
Compatible With:
SG-F772W
*Sold as a Pair
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
34.02 |
|
|
Ultramarine 8.8" Speakers - Black
Polk's Ultramarine speakers are designed to produce maximum sound in marine applications. Featuring "Air Suspension" technology and high-temperature voice coils, the Ultramarine family of speakers will crank up to 250 watts.
These powerful 8.8" marine speakers have rugged, removable sport grilles that stand up to sunlight and moisture. Also included is LED lighting built into the cone of the speaker.
Underneath, you'll find UV-treated silver polypropylene cones, durable surrounds, and cast aluminum baskets.
Features:
Air Suspension Design
Cast Aluminum Basket
High Temp Voice coil
Snap On Grille Installation Option
Technical Specifications:
1" Titanium dome tweeter
Sensitivity - 89.4dB
Max Power - 250W
125 Watts RMS
Cut-out Dimensions - 7-3/8"
Mounting Depth - 4-1/6"
In the Box:
Two (2) - 2 way speakers
Two (2) Trim rings
Mounting hardware
Installation manual
∗Sold in pairs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
370.91 |
|
|
NXL-M4 Full Range 4 Channel IPX5 Marine Grade Amplifier - 150 x 4W @ 4-Ohm
Designed for intense sessions that keep the party boat rocking all night long; the NXL-M4 is DS18’s high-quality, powerful amplifier for the wave runner looking for a big sound with a small footprint!
As a Class D Digital amplifier, the NXL-M4 uses a direct insert speaker and power terminals significantly smaller than your average amplifier, making it the perfect size for any vehicle’s custom build: but, what it lacks in size it makes up for in power.
The NXL-M4 handles 150W x 4CH @ 4 Ohms; 230W x 4CH @ 2 Ohms; and 440W x 2CH @ 4 Ohms Bridge of RMS Power and 1800W Peak Power.
Get clean, well-defined sound for with enough features (Fully Variable Bass Boost, Low Pass Filter, and High Pass Filter) to tune your music perfectly for optimal audio enjoyment! This full-range amplifier handles all speakers insanely well and has the features to make sure they play the way you want them to!
This amplifier is tough enough to stand up to the worst the waves throw at you! All controls are guarded by high-strength front covers that guarantee impenetrable defense against the elements; coated 4-layer PCB helps prevent corrosion caused by salt water; and Voltage, Thermal, and Short Circuit Protection for easy monitoring of your power levels.
Order the NXL-M4 for insane power out on the water!
Features:
Hardware resistant to corrosion and UV Protection
Coated 4 Layers PCB to prevent corrosion
IPX5 Water Resistance Grade
High Level Input For Radio Use
Front cover to keep the controls safe to the elements
LED Clip Indicator to easier adjustment
Stable and Reliable Class D Circuit Design
Sound Quality Verification Using AP Instruments
Direct Insert Power and Speaker Terminals
Short Circuit, Thermal, and Voltage Protection
Technical Specifications:
Number of Channels - 4
Frequency Response - 20Hz - 20KHz
2 Ohm RMS Power Per Channel - 4 x 230W
4 Ohm RMS Power Per Channel - 4 x 150W
4 Ohm RMS Power Bridge Channel - 2 x 440W
Signal-to-Noise Ratio - >90dB
Product Dimensions: (L x W x H) - 9.6" x 4.5" x 1.7"
*Sold as an Individual
|
479.94 |
|
|
7.7" ME-Series Speakers - Classic White Grille Covers - 250W
Pioneer ME-series speakers (both Sports and Classic designs) are protected from the effects of sun and water exposure, meeting both IPX7 and ASTM D4329 certification to achieve all-weather reliability.
Mica Reinforced IMPP monocoque cone with butyl rubber surround, constructed using an advanced in-mold bonding technique for superior water resistance while maintaining high quality, powerful sound.
The symmetrical motor design with high strength suspension is optimized to provide stability, linearity and clear, low distortion sound reproduction. Lightweight polyimide (PI) tweeter diaphragm and uniquely shaped wave guide provides natural and clear vocals with wide dispersion.
The TS-ME770FC 7.7″ Speakers come with sleek classic style grilles in a white finish that cosmetically integrate seamlessly into marine interiors and cabin designs.
*Optional UD-ME770LED RGB LED Light Kit (Sold Separately) provides illumination of the woofer cone for an enhanced personalization and cosmetic integration.
Features:
7.7" Two Way Coaxial System
13/16" (20mm) Dome Tweeter
Built-in RGB LED Lighting Option
Technical Specifications:
Cone Material - Water-Resistant IMPP
Sensitivity - 88dB
Max Power - 250W
75 Watts RMS
Cut-out Dimensions - 6-1/4"
Mounting Depth - 3-1/8"
In the Box:
Two (2) - 2 way speakers
Two (2) Classic White grilles
Mounting hardware
Installation manual
∗Sold as a pair
|
149.99 |
|
|
7.7" ME-Series Speakers - Black & White Sport Grille Covers - 250W
Pioneer ME-series speakers (both Sports and Classic designs) are protected from the effects of sun and water exposure, meeting both IPX7 and ASTM D4329 certification to achieve all-weather reliability.
Mica Reinforced IMPP monocoque cone with butyl rubber surround, constructed using an advanced in-mold bonding technique for superior water resistance while maintaining high quality, powerful sound.
The symmetrical motor design with high strength suspension is optimized to provide stability, linearity and clear, low distortion sound reproduction. Lightweight polyimide (PI) tweeter diaphragm and uniquely shaped wave guide provides natural and clear vocals with wide dispersion.
The TS-ME770FC 7.7″ Speakers comes with two sleek modern grilles, one in black and the other in a white finish that cosmetically integrate seamlessly into marine interiors and cabin designs.
*Optional UD-ME770LED RGB LED Light Kit (Sold Separately) provides illumination of the woofer cone for an enhanced personalization and cosmetic integration.
Features:
7.7" Two Way Coaxial System
13/16" (20mm) Dome Tweeter
Built-in RGB LED Lighting Option
Technical Specifications:
Cone Material - Water-Resistant IMPP
Sensitivity - 88dB
Max Power - 250W
75 Watts RMS
Cut-out Dimensions - 6-1/4"
Mounting Depth - 3-1/8"
In the Box:
Two (2) - 2 way speakers
Two (2) Classic White grilles
Mounting hardware
Installation manual
∗Sold as a pair
|
155.99 |
|
|
R Series 7.7” Marine Speakers - Anthracite Grille - 80W RMS & 160W Peak Power
Roswell R 7.7" Marine Speakers maximize the power and range of the R Series family to deliver the signature sound and durability of Roswell Marine Audio to more places than ever before. As the Roswell revolution continues to redefine audio experiences, the call for our sound in every situation has been answered. Customizable RGB LED lighting is seamlessly integrated to make the music come to life and set your perfect scene. This popular size brings new upgrade opportunities to any application on the water and beyond as a direct replacement for existing 7.7" speakers.
Features:
7.7" component-style speaker
3/4" tweeter
Integrated RGB LED backlit grille helps to create your desired visual atmosphere
Klippel® tested and certified to guarantee acoustic performance
Concealed integrated 6 dB/OCT crossover network
Deutsch wiring harness included for water-tight connection
Excellent marine durability
Specifications:
Color: Anthracite Grille
Continuous Power (RMS): 80 Watts
Peak Power (RMS): 160 Watts
Sensitivity: 88 dB @ 1W/1M
Frequency Response (+ / - 3 dB): 55Hz – 20kHz
Impedance Ω: 4Ω
Dimensions:
Nominal Diameter: 7.7 in. I 19.55 cm
Overall Diameter: 7.72 in. I 19.61 cm
Basket Diameter: 6.26 in. I 15.9 cm
Mounting Depth: 3.46 in. I 8.79 cm
Grill Height: 1.2 in. I 3 cm
*Sold as a Pair
|
376.87 |
|
|
Jabsco 11979-0001-P, 8 Blade Impeller Kit
Neoprene material
2 9/16 in. diameter
1 7/16 in. width
5/8 in. shaft diameter
Spline drive type
|
57.99 |
|
|
Jabsco 10 Blade Impeller Kit 18673-0003-P
Nitrile material
2 in. diameter
7/8 in. width
1/2 in. shaft diameter
Slotted shaft pin drive type
|
52.56 |
|