|
10" Subwoofer Ultramarine - White
Polk's marine subwoofers have always been known for intelligent design, impressive sound, and weather resistance. The UMS108 sub continues this tradition with solid construction that stands up to the elements.
The UMS108 is made to kick out deep bass under challenging conditions. Its mica-reinforced polypropylene cone handles up to 350 watts RMS, and the stiffness of the cast aluminum basket gives you the clean, hard-hitting performance you expect from Polk. This sub's air-suspension design makes it suitable for installation in any panel of your boat without the need for an enclosure.
Features:
Air Suspension Design
Cast Aluminum Basket
High Temp Voice coil
Snap On Grille Installation Option
Technical Specifications:
Sensitivity - 89.2dB
Max Power - 700W
350 Watts RMS
Cut-out Dimensions - 8.8"
Mounting Depth - 5.71"
In the Box:
One (1) Subwoofer
Grille
Mounting hardware
Installation manual
∗Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
179.94 |
|
|
10" Subwoofer Ultramarine - Silver
Polk's marine subwoofers have always been known for intelligent design, impressive sound, and weather resistance. The UMS108 sub continues this tradition with solid construction that stands up to the elements.
The UMS108 is made to kick out deep bass under challenging conditions. Its mica-reinforced polypropylene cone handles up to 350 watts RMS, and the stiffness of the cast aluminum basket gives you the clean, hard-hitting performance you expect from Polk. This sub's air-suspension design makes it suitable for installation in any panel of your boat without the need for an enclosure.
Features:
Air Suspension Design
Cast Aluminum Basket
High Temp Voice coil
Snap On Grille Installation Option
Technical Specifications:
Sensitivity - 89.2dB
Max Power - 700W
350 Watts RMS
Cut-out Dimensions - 8.8"
Mounting Depth - 5.71"
In the Box:
One (1) Subwoofer
Grille
Mounting hardware
Installation manual
∗Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
179.94 |
|
|
Speaker Spacer for FUSION MS-SW10 - 10" Subwoofer - .25" - White
Don't have enough depth to install your speaker/subwoofer? Problem solved these spacer rings give you that extra space needed to mount your speaker/subwoofer.
Specifications:
Thickness - .25"
Edge - 1/16" Round
Outer Diameter - 10.55" or 268 mm
Bolt Hole Diameter - 9.45" or 240 mm
Mounting Hole Diameter - 8.74" or 222 mm
Compatible With:
MS-SW10
*Sold as a Pair
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
40.14 |
|
|
R1 10" Subwoofer Package - White
Roswell's R1 10″ subwoofer package takes out the stress of shopping for the correct amp. It includes the Roswell R1 10″ subwoofer and the Roswell R1 550.2 marine amplifier to power it.
Includes:
R1 10" Subwoofer (white color)
R1 550.2 Marine Amplifier
|
562.50 |
|
|
XS-SL10SPGW XS Series 10" 600 Watt Sports Marine Subwoofer - Sports White & Grey Grill Options
Continuing to set the benchmark for marine audio entertainment, Fusion’s XS Series subwoofer features their trademark quality audio reproduction, enhanced marine aesthetics and LED illumination at a mid-range price point. Optimized for use in the marine environment, and built for performance, the XS Series subwoofer is designed to consistently produce quality low frequency audio at any volume level, season after season.
Set the tone, complement your music or get the party started on board with LED illumination in a wide range of colors available. The innovative translucent cone on the Sports style subwoofer produces bright, even LED illumination in any color you choose, which can be controlled with the MS-RGBRC wireless remote (sold separately).
With an IP65 weatherproof rating, True-Marine accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your XS Series subwoofer is built to last on your boat.
Versatile Design
Designed to add low frequencies to your audio system, the XS Series subwoofer features versatility in wiring options, providing different ways to integrate one into your audio entertainment setup. This can simplify installation, reduce system cost, and is an easy way to add bass.
Wire your subwoofer traditionally into your system through an amplifier, or alternatively create a 2.1 audio zone by connecting two speakers and a subwoofer directly to a Fusion multi-zone stereo with DSP, without the need to use an external amplifier. Simply connect a pair of speakers to the zone 1 speaker connections, and the XS Series subwoofer to the left and right speaker connections of zone 2, then select the applicable DSP profile for setup.
Features:
Versatile Design: With versatile options for integrating your subwoofer into your audio system, you can customize your setup to suit your audio requirements. Wire your subwoofer traditionally through an amplifier or create a 2.1 audio zone by connecting your subwoofer and two speakers directly to a compatible Fusion stereo with DSP, like the Apollo Series, without requiring an external amplifier.
Innovative RGB Illuminated Cone: Enhance your on-water audio entertainment experience with LED illumination in a range of colors. The innovative translucent cone disperses a bright, even illumination to set the tone on board.
Quality Audio Reproduction: Enjoy quality low frequency audio at any volume level.
True-Marine Designed and Engineered: Extensively tested to perform in the harsh marine environment, the XS Series carry an IP65 weatherproof rating along with True-Marine accreditation.
Two Grille Options Supplied: Enjoy the freedom to choose the finish to suit your vessel, with both Sports Grey and Sports White grilles supplied in the box.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
299.99 |
|
|
Speaker Spacer for Wet Sounds REVO 8 FA S4 - 8" Series Subwoofer - .25" - White
Don't have enough depth to install your speaker/subwoofer? Problem solved these spacer rings give you that extra space needed to mount your speaker/subwoofer.
Specifications:
Thickness - .25"
Edge - 1/16" Round
Outer Diameter - 8.89" or 226 mm
Bolt Hole Circle Diameter - 8" or 203 mm
Mounting Hole Diameter - 7.10" or 180 mm
Compatible With 8" REVO 8 FA S4 8:
REVO 8 FA S4-B and REVO 8 FA S4-W
*Sold as a Pair
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
30.00 |
|
|
Speaker Spacer for Wet Sounds REVO 12 HP/FA S4 - 12" Series Subwoofer - .50" - White
Don't have enough depth to install your speaker/subwoofer? Problem solved these spacer rings give you that extra space needed to mount your speaker/subwoofer.
Specifications:
Thickness - .50"
Edge - 1/16" Round
Outer Diameter - 12.68" or 322 mm
Bolt Hole Circle Diameter - 12.26" or 311 mm
Mounting Hole Diameter - 11.26" or 286 mm
Compatible With 12" REVO 12 HP/FA S4:
REVO 12 HP S4-B V2, REVO 12 FA S4-W V2, REVO 12 FA S2-B V2, REVO 12 FA S2-W and REVO 12 FA S4-B V2
*Sold as a Pair
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
47.63 |
|
|
HYDRO 10" Subwoofer with RGB Lights - 600W - White
The DS18 Hydro Marine Subwoofer is compromised of many components and accessories to make any build imaginable come to life. With over 50 marine grade compliant products we have whatever you may need for your ATV, UTV, Side by Side, Jeep, Motorcycle, Boat or anything in between.
Compatible with DS18 LED-BTC.
Features:
Integrated RGB lights with Optional Remote.
IP65 Marine Grade Compliant Specifications
100% UV Stable
High Temp Injection Molded Composite
High Gloss Basket with UV Coating
Technical Specifications:
Size 10"
RMS Power - 300W
MAX Power - 600W
Magnet Type - Y35 Ferrite Main Magnet & Reverse Neodymium
Sensitivity - 89dB
Nominal Impedance - 4 Ohm
Frequency Response - 25Hz - 23KHz
Mounting Depth - 5.02" (127.5mm)
Cut-Out Diameter - 8.78" (223mm)
Overall Diameter - 10.75" (273mm)
Overall Height - 6.71" (170.5,,)
Color - White
∗Sold as a Single
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
287.94 |
|
|
R1 10" Subwoofer - White - 250W RMS & 500W Peak Power
The R1 10" marine subwoofer has a truly versatile design that will outperform in an infinite baffle configuration as well as being suited for sealed and ported enclosures. This sub will handle 250 watts RMS and have excellent low-end extension.
For a little extra flash, the R1 10" grill option has built-in RGB LEDs that backlight the cone to create your desired visual atmosphere. All of this is packed into durable marine-grade plastic housings that need just over 5" of mounting depth, giving you ample placement possibilities. The only limit is your imagination. If you’re wondering what to power it with, check out the R1 1000.1 Marine Amplifier.
Features:
Integrated RGB LEDs backlight the cone to create your desired visual atmosphere
Custom-machined wire terminals allow for rock-solid wire connections
Klippel® tested and certified to guarantee acoustic performance
Press fit inserts hide installation hardware, which provides a clean, finished look
Klippel® optimizes motor structure for maximum power handling and sound quality
Extreme salt and UV resistance
Specifications:
Color: White
Continuous Power (RMS): 250 Watts
Peak Power (RMS): 500 Watts
Frequency Response (+ / - 3 dB): 35Hz - 300kHz
Impedance Ω: 4Ω
Dimensions:
Nominal Diameter: 10 in. I 25.4 cm
Overall Diameter: 10.85 in. | 27.5 cm
Basket Diameter: 9.25 in. | 23.5 cm
Mounting Depth: 5.08 in. 12.9 cm
Total Depth: 7.02 in. 17.8 cm
|
370.72 |
|
|
RMA 10" Subwoofer Package - Black
Roswell's RMA 10″ subwoofer package takes out the stress of shopping for the correct amp.
Inside This Box:
RMA 10” Subwoofer
R1 550.2 Marine Amplifier
RMA 10" Subwoofer
The RMA 10" marine subwoofers have a truly versatile design that will outperform an infinite baffle configuration as well as being suited for sealed and ported enclosures. This sub will handle 250-watt RMS and have an excellent low-end extension. All of this is packed into durable marine-grade plastic housings that need just over 5" of mounting depth, giving users ample placement possibilities. Pairs perfectly with the R1 1000.1 marine amplifier.
Features:
Custom-machined wire terminals allow for rock-solid wire connections
Klippel® tested and certified to guarantee acoustic performance
Klippel® optimizes motor structure for maximum power handling and sound quality
Extreme salt and UV resistance
Specifications:
Color: Black
Continuous Power (RMS): 250 Watts
Peak Power (RMS): 500 Watts
Sensitivity: 88dB @ 1W/1M
Frequency Response (+ / - 3 dB): 35Hz - 300kHz
Impedance Ω: 4Ω
Dimensions:
Nominal Diameter: 10 in. I 25.4 cm
Overall Diameter: 10.85 in. | 27.5 cm
Basket Diameter: 9.25 in. | 23.5 cm
Mounting Depth: 5.08 in. 12.9 cm
Total Depth: 7.02 in. 17.8 cm
R1 550.2 2-Channel Marine Amplifier
Roswell’s R1 550.2 is the ideal amp to run an R1 tower speaker setup. It’s a 2-channel Class-D design that puts out 165 watts RMS per channel at 4Ω and 275 watts RMS per channel at 2Ω. It features calibrated crossover controls, differential RCA inputs for maximum noise rejection, fully conformal-coated PCBs, and nickel-plated marine-grade wire terminals.
Features:
Ch 1-2 calibrated crossover (FULL/HPF/LPF)
Space-saving stackable design
Bridgeable 2-channel design
Marine-grade durability
4 Ohm Stable at 165 watts per channel
High-Efficiency Class-D Topology
2 Ohm Stable at 275 watts per channel
Conformal-coated PCBs
The lit logo power indicator lets you know your amp is receiving power
Nickel-plated wire terminals
Switchable Differential RCA inputs minimize interference and induced noise
Specifications:
Continuous Power (RMS): 4Ω: 165W x 2 / 2Ω: 275W x 2
Bridged: 4Ω: 550W x 1
Frequency Response: 10Hz – 25Hz
Input Sensitivity: 0.2–10.0V
HPF (High Pass Filter): 30Hz – 300Hz
LPF (Low Pass Filter): 30Hz – 300Hz
Bass EQ: 0-18dB @ 45Hz
Subsonic Filter: 10Hz – 55Hz
Phase Control: 0-180º
Dimensions: Inches: 1.90 x 7.0625 x 11.125 Centimeters: 4.83 x 17.94 x 28.26
|
522.98 |
|
|
Speaker Spacer for FUSION SG-SL102S - 10" Subwoofer - .50" - Black
Don't have enough depth to install your speaker/subwoofer? Problem solved these spacer rings give you that extra space needed to mount your speaker/subwoofer.
Specifications:
Thickness - .50"
Edge - 1/16" Round
Outer Diameter - 10.81" or 275 mm
Bolt Hole Diameter - 9.75" or 248 mm
Mounting Hole Diameter - 8.78" or 223 mm
Compatible With:
SG-SL102SPC and SG-SL102SPW
*Sold as a Pair
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
43.55 |
|
|
R1 10" Subwoofer Package - Anthracite
Roswell's R1 10″ subwoofer package takes out the stress of shopping for the correct amp. It includes the Roswell R1 10″ subwoofer and the Roswell R1 550.2 marine amplifier to power it.
Includes:
R1 10" Subwoofer (anthracite color)
R1 550.2 Marine Amplifier
|
562.50 |
|
|
HYDRO 10" Subwoofer w/RGB Lights - 600W - Carbon Fiber
The DS18 Hydro Marine Subwoofer is compromised of many components and accessories to make any build imaginable come to life. With over 50 marine grade compliant products we have whatever you may need for your ATV, UTV, Side by Side, Jeep, Motorcycle, Boat or anything in between.
Compatible with DS18 LED-BTC.
Features:
Integrated RGB lights with Optional Remote.
IP65 Marine Grade Compliant Specifications
100% UV Stable
High Temp Injection Molded Composite
High Gloss Basket with UV Coating
Technical Specifications:
Size 10"
RMS Power - 300W
MAX Power - 600W
Magnet Type - Y35 Ferrite Main Magnet & Reverse Neodymium
Sensitivity - 89dB
Nominal Impedance - 4 Ohm
Frequency Response - 25Hz - 23KHz
Mounting Depth - 5.02" (127.5mm)
Cut-Out Diameter - 8.78" (223mm)
Overall Diameter - 10.75" (273mm)
Overall Height - 6.71" (170.5,,)
Color - Black Carbon Fiber
∗Sold as a Single
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
287.94 |
|
|
RMA 10" Subwoofer - Black - 250W RMS & 500W Peak Power
The RMA 10" marine subwoofers have a truly versatile design that will outperform in an infinite baffle configuration as well as being suited for sealed and ported enclosures. This sub will handle 250-watt RMS and have excellent low-end extension.
All of this is packed into durable marine-grade plastic housings that need just over 5" of mounting depth, giving you ample placement possibilities. Pairs perfectly with the R1 1000.1 marine amplifier.
Features:
Custom-machined wire terminals allow for rock-solid wire connections
Klippel® tested and certified to guarantee acoustic performance
Klippel® optimizes motor structure for maximum power handling and sound quality
Extreme salt and UV resistance
Specifications:
Color: Black
Continuous Power (RMS): 250 Watts
Peak Power (RMS): 500 Watts
Sensitivity: 88dB @ 1W/1M
Frequency Response (+ / - 3 dB): 35Hz - 300kHz
Impedance Ω: 4Ω
Dimensions:
Nominal Diameter: 10 in. I 25.4 cm
Overall Diameter: 10.85 in. | 27.5 cm
Basket Diameter: 9.25 in. | 23.5 cm
Mounting Depth: 5.08 in. 12.9 cm
Total Depth: 7.02 in. 17.8 cm
|
355.63 |
|
|
R1 10" Subwoofer - Anthracite - 250W RMS & 500W Peak Power
The R1 10" marine subwoofers have a truly versatile design that will outperform in an infinite baffle configuration as well as being suited for sealed and ported enclosures. These subs will handle 250 watts RMS and have excellent low-end extension. For a little extra flash, the R1 10" grill option has built-in RGB LEDs that backlight the cone to create your desired visual atmosphere.
All of this is packed into durable marine-grade plastic housings that need just over 5" of mounting depth, giving ample placement possibilities. Wondering what to power it with? Check out the R1 1000.1 Marine Amplifier.
Features:
Integrated RGB LEDs backlight the cone to create the desired visual atmosphere
Custom-machined wire terminals allow for rock-solid wire connections
Klippel® tested and certified to guarantee acoustic performance
Klippel® optimizes motor structure for maximum power handling and sound quality
Press-fit inserts hide installation hardware which provides a clean finished look
Extreme salt and UV resistance
Specifications:
Color: Anthracite
Continuous Power (RMS): 250 Watts
Peak Power (RMS): 500 Watts
Sensitivity: 88dB @ 1W/1M
Frequency Response (+ / - 3 dB): 35Hz - 300kHz
Impedance Ω: 4Ω
Dimensions:
Nominal Diameter: 10 in. I 25.4 cm
Overall Diameter: 10.85 in. | 27.5 cm
Basket Diameter: 9.25 in. | 23.5 cm
Mounting Depth: 5.08 in. 12.9 cm
Total Depth: 7.02 in. 17.8 cm
|
370.72 |
|