|
Metal Winch Socket (215, 315, T1650, ST315, AP1500, AP3500)
|
23.65 |
|
|
Circuit Breaker, 30 amp (215, 315, T1650, AP1500)
|
14.77 |
|
|
20' x 7/32" Replacement Galvanized Cable with Hook
For all manual and electric trailer winches. High chromium content and added nickel make these cables virtually impervious to corrosion and add years of service. Ideal for any winch using 7/32 inches diameter cable, designed for handling boats up to 11,500 pounds, superior 7 x 19 strand cable construction for maximum pulling strength. Complete installation instructions included. Available with heavy duty zinc plated pulley block.
Features:
Galvanized cable with hook
20 feet x 7/32 inches
Replacement for 215, 315 and T1650
|
47.74 |
|
|
Flow-Rite 1-1/8" Elbow Quick Connect Socket f/Auto Ballast System
Features:
Also fit 1.0" Diameter hose
These connect to FatSacs W743, W743-SS, W743-DOUBLE, & W748 custom machined fittings
*Sold as an Individual
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
9.74 |
|
|
Socket (712A, 912, 915, T2400, T4000, T3200PO, ST712, BH12, SH12HBM, AP3500)
|
14.77 |
|
|
Plug (712A, 912, 915, T2400, T4000, T3200PO, ST712, BH12, SH12HBM, AP3500)
|
16.27 |
|
|
Male Plug & Socket for 712, 912, 915, RC30 & RC23
Replacement wiring harness plug to fit the socket. For Powerwinch Models: 712, 912, 915, RC30, and RC23.
|
26.63 |
|
|
Shurflo 94-315-34, 60 Psi Bypass Valve Kit
|
30.94 |
|
|
SHURflo 94-315-35, 60 Psi Bypass Valve Kit
|
62.62 |
|
|
LUTZ 0110-215, Drum Tube MSL-PP-41-R-HC-63"
|
800.10 |
|
|
LUTZ 0204-215, M SERIES BARREL ADAPTOR
|
135.85 |
|
|
Lutz Pump 0201-215 Nozzle PP 3/4
|
146.97 |
|
|
PP4500-05 PowerPod Pre-Cut for Humminbird HELIX 7
The PP4500 Series, PowerPods are a better option than bracket mounting. PowerPods provide a clean look of flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with marine electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are great for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
|
331.62 |
|
|
RAM-ROD 2007 Fishing Rod Holder with Single Socket for 1.5" Diameter Ball Bases
The RAP-340NB consists of the RAM-ROD 2007 rod holder and single socket for 1.5" diameter ball bases. Ideally suited for vessels as small as kayaks, to larger Tournament or Charter boats, this new line of products is guaranteed to please. Incorporating our one of a kind and patented ball and socket feature, perfect adjustment is a breeze and setting the hook could not be faster. When it comes to price, form, function, and don't forget fun, RAM is the one to get the job done!
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display.
|
14.45 |
|
|
Vertical Mounting Base with Double 6" Swing Arm and Swivel Single Socket for 1.5" Balls
Features:
Weight: 3.45 lbs.
Double 6" Swing Arm
Swivel Single Socket
Made specifically for 1.5" balls
|
91.28 |
|