|
Socket (712A, 912, 915, T2400, T4000, T3200PO, ST712, BH12, SH12HBM, AP3500)
|
14.77 |
|
|
Plug (712A, 912, 915, T2400, T4000, T3200PO, ST712, BH12, SH12HBM, AP3500)
|
16.27 |
|
|
Switch (712A, 912, 915, T2400, T4000, T3200PO, ST712)
|
49.85 |
|
|
Circuit Breaker, 60 amp (712A, 912, 915, T2400, T4000, T3200PO, ST712, SH12HBM, AP3500)
|
23.65 |
|
|
Wiring Harness, 60 amp (712A, 912, 915, T2400, T4000, T3200PO, AP3500)
|
84.16 |
|
|
40' x 7/32" Replacement Galvanized Cable with Hook
For all manual and electric trailer winches. High chromium content and added nickel make these cables virtually impervious to corrosion and add years of service. Ideal for any winch using 7/32 inches diameter cable, designed for handling boats up to 11,500 pounds, superior 7 x 19 strand cable construction for maximum pulling strength. Complete installation instructions included. Available with heavy duty zinc plated pulley block.
Features:
Galvanized cable with hook
40 feet x 7/32 inches
Replacement for RC30, RC23, 712A, 912, 915 T2400 and AP3500 winches
|
60.29 |
|
|
Male Plug & Socket for 712, 912, 915, RC30 & RC23
Replacement wiring harness plug to fit the socket. For Powerwinch Models: 712, 912, 915, RC30, and RC23.
|
26.63 |
|
|
Thrust Bearing, Thrust Washers, and Springs (712A, 912, T2400, T4000, ST712, VS190, AP3500)
|
60.25 |
|
|
Flow-Rite 1-1/8" Elbow Quick Connect Socket f/Auto Ballast System
Features:
Also fit 1.0" Diameter hose
These connect to FatSacs W743, W743-SS, W743-DOUBLE, & W748 custom machined fittings
*Sold as an Individual
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
9.74 |
|
|
Metal Winch Socket (215, 315, T1650, ST315, AP1500, AP3500)
|
23.65 |
|
|
RAM-ROD 2007 Fishing Rod Holder with Single Socket for 1.5" Diameter Ball Bases
The RAP-340NB consists of the RAM-ROD 2007 rod holder and single socket for 1.5" diameter ball bases. Ideally suited for vessels as small as kayaks, to larger Tournament or Charter boats, this new line of products is guaranteed to please. Incorporating our one of a kind and patented ball and socket feature, perfect adjustment is a breeze and setting the hook could not be faster. When it comes to price, form, function, and don't forget fun, RAM is the one to get the job done!
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display.
|
14.45 |
|
|
Vertical Mounting Base with Double 6" Swing Arm and Swivel Single Socket for 1.5" Balls
Features:
Weight: 3.45 lbs.
Double 6" Swing Arm
Swivel Single Socket
Made specifically for 1.5" balls
|
91.28 |
|
|
PP5200-20 PowerPod Pre-Cut for Garmin GPSMAP® 1223, 1223xsv, 1243 & 1243xsv
PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.
PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.
NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.
Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.
All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up its commitment to quality by offering a 10-year warranty on all Gen3 NavPods.
PowerPods: Protection, Convenience, Security.
|
471.26 |
|
|
Scot Pump 915-150-000 Strainer 1.5Fnpt In
|
880.26 |
|
|
1.5" Pedestal Socket For Tiller Pilots
Allows for horizontal mounting of the tiller pilot when the fixed end of the pilot is lower than the tiller arm.
|
92.03 |
|