Handheld Digital Multi-Meter The handheld digital multi-meter provides excellent performance in a portable, durable housing with a large LCD display for clear visibility. With overall circuitry design centering on large-scale IC A/D converters in conjuction with over-load protection the meter makes a great utility instrument. The meter can be used to measure DC and AC voltage, DC current, resistance, positive diode voltage fall and continuity. Features: Measures AC/DC amperage and voltage Measures continuity and resistance Large digital LCD display Backlight feature Test leads included Measurement hold feature Built in EZ stand Continuity tone alert Low battery indicator Specifications: Max Voltage between input terminal and earth ground: CAT 600V Over-range indication: display "1" for the significant digit Automatic display of negative polarity "-" Max LCD display: 1999 (3-1/2 digits) Fuse protection: F-200mA/250V (05 x 20mm) Power Supply: 9V battery, 6F22 or NEDA 1604 Operating Temp: 32° F to 104° F (relative humidity <85%) Storage Temp: 14° F to 122° F (relative humidity <85%) Weight approximate: 0.4 lbs. (including battery) Included: Test leads: electric rating 1000V 10A Battery: 9V, 6F22 or NEDA 1604 Fuse: F-200mA/250V Operator's Manual Holster WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LPS-1 Handheld Digital Depth Sounder The LPS-1 is simple to use. Just put it in the water, point and push the ON button. The depth or distance is digitally displayed for 10 seconds before automatically shutting off, with no risk of battery drain. A must for the outdoor enthusiast! Take the compact, lightweight LPS-1 wherever you go: fly-in trips, ice fishing, canoe trips, remote mountain lakes, float tubing, scuba diving and more. For fishing, simply touch it to the surface of the water. For ice fishing, the signal will shoot through clear ice! When diving, use it to check depths or distances to any object under water: reefs, sunken wrecks even the distance to the surface. Waterproof down to 150'. Features: 200 kHz, 22° built-in transducer Reads depth from 1.8 to 200 feet Backlit display for night use Automatic shutoff Uses one 9 volt battery Floats Specifications: Color: Nautical Yellow Weight: 7 oz. Length: 7-3/4" Voltage: 9 volts Max Range: 200 feet Power: 25 Watts WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Digital AC Voltmeter- 10-250VAC Monitor marine/land based power distribution & generating systems (ABYC E-11.11.3.2.) AC voltmeter and AC ammeter are true RMS (ABYC E-11.11.3.2.3.) Surface mount with only two 5/32" diameter holes Window mount in standard 2.5" analog meter cutout (2.90" W X 1.28" H) Three digit LED display (Frequency meters are two digits) Reversed Polarity Protected Splashproof front Includes pigtails, mounting hardware, & instructions

1842 M2 OLED Digital Bilge Meter The M2 Organic LED Digital Monitor measures essential electrical system parameters with adjustable alarms and an auto-dimming display. The M2 Monitors include a MOSFET External Circuit Relay (ECR) which can be used to control external circuits based on any value measured by the M2. Features: Auto-dimming, bright Organic LED display is easy to read 80dB alarm on all models Isolated 500mA MOSFET relay Bilge float switch not included Specifications: Meter: Bilge Function: Monitors up to 4 bilges Alarm/Relay Activation: Run time/hr Cycles/24 hr Average Cycles Display Size: 55mm x 28mm Input Voltage: 7-70V DC Range: 0.3W-1.0W WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Digital Multi Control 200/200A GX The Digital Multi Control is used to remotely view and adjust AC input currents, and turn on and off the Multi or Quattro. It is designed to integrate cleanly with your boat, vehicle or house system control panel. The Digital Multi Control panel (DMC) is designed to work with all Multi/Quattro. This includes stand alone, parallel and 2-3 phase configurations. Connecting the DMC to your system is simple, in most cases just connecting the DMC with an RJ45 cable is sufficient and no extra set-up handling is required. Warranty Info WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Please contact your dealer for any returns, repairs or support issues related to this product.

AC Digital Frequency Meter Displays frequency from 40 to 90 Hertz 3 levels of display brightness Splashproof front WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Digital Battery Meter (MK-BM-1D) Monitors voltage level and "state of charge" of any 12-volt battery LCD display Compact frame for easy storage LED's indicate, 2/3, 1/3 or O "state of charge." WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Digital Multi Control 200/200A This panel is intended both for Multis and Quattros. It allows PowerControl and PowerAssist current limit setting for two AC sources: a generator and shore side current for example. Setting range: up to 200 Amps. The brightness of the LEDs is automatically reduced during night time. Warranty Info WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Please contact your dealer for any returns, repairs or support issues related to this product.

Jabsco 12 Blade Impeller Kit 1210-0003-P Nitrile material 2 1/4 in. diameter 1 1/4 in. width 5/8 in. shaft diameter Spline drive type

Jabsco 6 Blade Impeller Kit 1414-0003-P Nitrile material 1 1/4 in. diameter 15/32 in. width 15/16 in. shaft diameter Single flat D type

Jabsco 12 Blade Impeller Kit 4568-0001-P Neoprene material 2 1/4 in. diameter 1 1/4 in. width 5/8 in. shaft diameter Key drive type

12 Volt DC 8 Position w/Digital Meter Features: 4 to 32 branch circuits with installed 15 Ampere circuit breakers Available with voltmeters, ammeters, and digital multimeters Includes 4205-Square Format Label Set Specifications: Positions: 8 Nominal Voltage: 12V DC Maximum Amperage*: 100A per bus Height: 10.75" (273.05mm) Width: 4.88" (123.95mm) Depth: 4.00" (101.6mm) Weight: 5.76lb (2.61kg) * Maximum amperage ratings are dependent on use of appropriately sized fuses and wire for a given application. Includes: (8) - 7403 - A-Series Flat Rocker Circuit Breaker - Single Pole 15A (1) - 4205 - Basic DC Label Kit - 30 Black Square Labels [LABEL] (1) - 8248 - DC Digital Multi-Function Meter with Alarm (Meter) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

12 Volt DC 12 Position w/Digital Meter Features: 4 to 32 branch circuits with installed 15 Ampere circuit breakers Available with voltmeters, ammeters, and digital multimeters Includes 4205-Square Format Label Set Specifications: Positions: 12 Nominal Voltage: 12V DC Maximum Amperage*: 100A per bus Height: 7.75" (196.85mm) Width: 9.25" (234.95mm) Depth: 4.00" (101.6mm) Weight: 5.99lb (2.72kg) * Maximum amperage ratings are dependent on use of appropriately sized fuses and wire for a given application. Includes: (12) - 7403 - A-Series Flat Rocker Circuit Breaker - Single Pole 15A (1) - 4205 - Basic DC Label Kit - 30 Black Square Labels [LABEL] (1) - 8248 - DC Digital Multi-Function Meter with Alarm (Meter) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

12 Volt DC Main + 19 Positions w/Digital Meter Features: 4 to 32 branch circuits with installed 15 Ampere circuit breakers Available with voltmeters, ammeters, and digital multimeters Includes 4205-Square Format Label Set Specifications: Positions: 19 Nominal Voltage: 12V DC Maximum Amperage*: 100A per bus Height: 7.75" (196.85mm) Width: 13.63" (346.2mm) Depth: 4.00" (101.6mm) Weight: 8.80lb (3.99kg) * Maximum amperage ratings are dependent on use of appropriately sized fuses and wire for a given application. Includes: (19) - 7403 - A-Series Flat Rocker Circuit Breaker - Single Pole 15A (1) - 4205 - Basic DC Label Kit - 30 Black Square Labels [LABEL] (1) - 7549 - C-Series Flat Rocker Circuit Breaker - Single Pole 100A (Main) (1) - 8248 - DC Digital Multi-Function Meter with Alarm (Meter) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

NavAlert NMEA Monitor & Alarm System NavAlert is Digital Yacht’s latest innovation and allows an alarm to be set for any parameter that’s available on the boat’s NMEA 2000 network. That could be navigation data such as depth, heading, or speed, as well as electrical data such as voltage and engine/generator data including temperature, pressure, tank levels, fuel flow, etc. It connects anywhere on the NMEA 2000 network and takes power from this connection, so installation is super simple. A local WiFi network is created by NavAlert, so setup is possible via any smartphone, tablet, or PC. Simply choose the parameter to monitor and set an alarm level. Alarms/Alerts Integrated into NavAlert is a custom alarm for anchor drift using an algorithm to calculate the optimum drift radius based on depth and the scope of the chain for reliable notifications. There’s also an anti-collision alarm based on CPA (closest point of approach) and TCPA (time to the closest point of approach) AIS data from a connected AIS. These alerts can also be monitored through the wireless interface with attractive graphical displays of current status. Alarms can also generate an SMS message, which can be relayed through Digital Yacht’s 4GXtream internet connectivity solution, allowing remote monitoring, which is great for feeling secure that the anchor is holding well when enjoying a lunch ashore. Alarms are independent of any alarms set on a plotter, allowing NavAlert to operate even without a primary multi-function display being powered up (an important feature for power-limited sailboats). Alerts can also be relayed to compatible multi-function devices (Garmin supports this function) for a pop-up data window indicating an alert and the ability to acknowledge it. *NavAlert is universal, using the industry standard NMEA 2000 data protocol, so it will integrate with all leading brands and systems. Operation The operation is simple. Simply search for the WiFi network that NavAlert creates and connect via a smartphone or tablet. Open a browser and connect to NavAlert, and users are presented with a clear graphical interface allowing easy setup, configuration, and viewing of the alerts and network data. NavAlert constantly monitors the whole network, so alert parameters can be set for any variable. Users can configure the NavAlert through its simple web interface. Just open a web browser, enter the NavAlert’s IP address, and users can change the network name and password, or even merge the WiFi to an existing WiFi network on board… So no complicated programming software or app is required. Features: Multiple parameters can be monitored Specifications: Universal NMEA 2000 alarm and monitoring solution Set a configurable audio and visual alarm for any parameter on the NMEA 2000 network – for instance: shallow depth, low fuel level, off course, engine temp, tank levels, low voltage, etc Relay the alert via the NMEA 2000 bus to a Garmin multi-function display to deliver a popup alarm window SMS alerting through Digital Yacht’s 4G Xtream system to a mobile – ideal for remote monitoring of the boat. Built-in unique anchor drift alarm Built-in AIS collision avoidance alarm What’s In the Box: 1m NMEA2000 drop cable WiFi antenna built-in