Rocker Switches (Waterproof Contura) Double pole/Double Throw w/momentary configurations Sealed IP68 rated per IEC 529 Ignition protection construction meets requirements of UL 1500 and ISO 8846 Black textured actuators (Hard surface with bumps) Contacts are rated at 12VDC 20A, or 24VDC 15A (ABYC E-11.12.1.1) DC moisture resistant Per Mil-Std 202F, Method 107F Optional rubber gaskets provide a watertight panel seal meets IP67 (P/n 004-176) 1/4" male tab terminals are standard without barriers (ABYC E-11-14.5.4 Exception) Hole plug - Black (P/N 001-295)

Rocker Switch (Waterproof Contura) Single Pole/Single Throw - Maintaining configurations Sealed IP68 rated per IEC 529 Ignition protection construction meets requirements of UL 1500 and ISO 8846 Black textured actuators (Hard Surface with Bumps) Red incandescent 12VDC 80mA Status Indicators Contacts are rated at 12VDC 20A, or 24VDC 15A (ABYC E-11.12.1.1) DC moisture resistant per Mil-Std 202F, Method 107F Optional rubber gaskets provide a watertight panel seal meets IP67 (P/N 004-176) 1/4" male tab terminals are standard without barriers (ABYC E-11-14.5.4 Exception) Hole Plug Black (P/N 001-295)

Metal Bat Handle Toggle Switches Single or double pole, and maintaining or momentary configurations are available Rated at 10A 250VAC, 15A 125VAC. and 15A 30VDC (ABYC E-11.14.1.1) AC units are UL Recognized for use in the USA and CSA certified for use in Canada Optional silicone rubber boots provide a watertight panel seal 1/4" male tab terminals are standard Hole plugs 1/2" diameter black (P/N 016-004) and White (P/N 016-020)

Rocker Switch (Waterproof Contura) Features: Double Pole/Double Throw - Maintaining configurations Sealed IP68 rated per IEC 529 Ignition protection construction meets requirements of UL 1500 and ISO 8846 Black textured actuators (hard surface with bumps) Contacts are rated at 12VDC 20A, or 24VDC 15A (ABYC E-11.12.1.1) DC Moisture resistant Per Mil-Std 202F, Method 107F Optional rubber gaskets provide a watertight panel seal meets IP67 (P/N 004-176) 1/4" male tab terminals are standard without barries (ABYC E-11-14.5.4 Exception) Hole plug black (P/N 001-295)

Rocker Switch (Waterproof Contura) Double Pole/Double Throw - maintaining configurations Sealed IP68 rated per IEC 529 Ignition protection construction meets requirements of UL 1500 and ISO 8846 Black textured actuators (Hard Surface with Bumps) Contacts are rated at 12VDC 20A, or 24VDC 15A (ABYC E-11.12.1.1) DC moisture resistant Per Mil-Std 202F, Method 107F Optional rubber gaskets provide a watertight panel seal meets IP67 (P/N 004-176) 1/4" male tab terminals are standard without the barries (ABYC E-11-14.5.4 Exception) Hole plug black (P/N 001-295)

Rocker Switch (Waterproof Contura) Single Pole/Double Throw - Maintaining configurations Sealed IP68 rated per IEC 529 Ignition protection construction meets requirements of UL 1500 and ISO 8846 Black textured actuators (Hard Surface with Bumps) Red incandescent 12VDC 20A, or 24VDC 15A (ABYC E-11.12.1.1) Contacts are rated at 12VDC 20A, or 24VDC 15A (ABYC E-11.12.1.1) DC moisture resistant Per Mil-Std 202F, Method 107F Optional rubber gaskets provide a watertight panel seal meets IP67 (P/N 004-176) 1/4" male tab terminals are standard without barries (ABYC E-11-14.5.4 Exception) Hole plug Black (P/N 001-295)

Metal Bat Handle Toggle Switches Single or Double pole, and maintaining or momentary configurations are available Rated at 10A 250VAC, 15A 125VAC, and 15A 30VDC (ABYC E-11.14.1.1) AC units are UL recognized for use in the USA and CSA Certified for use in Canada Optional silicone rubber boots provide a watertight panel seal 1/4" male tab terminals are standard Hole plugs 1/2" diameter Black (P/N 016-004) and White (P/N 016-020)

Rocker Switch UL Recognized and CSA Certified Single Pole Non-Illuminated Snap-in Mounting Replacement Switches for Paneltronics' Deluxe and Premier Panels Specifications: Maximum Contact Rating: 6 Amps @ 125VAC or 4 Amps @ 250VAC Contacts: Silver Plated Copper Terminals: Silver Plated Copper 1/4" (6.3mm) Quick Connects Operating Temperature: -4 deg F (-20 deg C) to 131 deg F (55 deg C) Housing and Actuator: Black Thermoplastic Flammability Rating: UL 94 V-2 Rated IEC 60529: IP40 Panel Thickness: 1/8" (3.18mm) Recommended Panel Cut-Out: 1.188" (30.18mm) x 0.468" (11.89mm)

360 Panel - Rocker Switch DPDT - ON-OFF-(ON) The 360 Panel System uses an open frame to mount a broad selection of modules, allowing multiple functions to be combined in a single panel. This innovative design offers a wide choice of panel features, can accommodate future changes and permits rapid assembly. With options ranging from battery management to source selection, the 360 Panel System provides unmatched design flexibility. For use in 360 panels in the following modules: Gauge, DC Push Button + Switch, and DC Battery Management Specifications: Action*: ON-OFF-(ON) Pole/Throw**: DPDT Maximum Amperage***:8A @ 125V AC / 5A @ 12V DC / 5A @ 24V DC / 4A @ 250V AC Terminal Type: Wire Leads Terminal Size: 6.00" (152.4mm) Weight:0.08lb (0.04kg) *Action () = Momentary ON **Pole/Throw: SPST - Single Pole/Single Throw SPDT - Single Pole/Double Throw DPST - Double Pole/Single Throw DPDT - Double Pole/Double Throw ***Maximum Amperage - Maximum amperage ratings are dependent on use of appropriately sized fuses and wire for a given application. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

360 Panel - Rocker Switch DPDT - (ON)-OFF-(ON) The 360 Panel System uses an open frame to mount a broad selection of modules, allowing multiple functions to be combined in a single panel. This innovative design offers a wide choice of panel features, can accommodate future changes and permits rapid assembly. With options ranging from battery management to source selection, the 360 Panel System provides unmatched design flexibility. For use in 360 panels in the following modules: Gauge, DC Push Button + Switch, and DC Battery Management Specifications: Action*: (ON)-OFF-(ON) Pole/Throw**: DPDT Maximum Amperage***:8A @ 125V AC / 5A @ 12V DC / 5A @ 24V DC / 4A @ 250V AC Terminal Type: Wire Leads Terminal Size: 6.00" (152.4mm) Weight:0.08lb (0.04kg) *Action () = Momentary ON **Pole/Throw: SPST - Single Pole/Single Throw SPDT - Single Pole/Double Throw DPST - Double Pole/Single Throw DPDT - Double Pole/Double Throw ***Maximum Amperage - Maximum amperage ratings are dependent on use of appropriately sized fuses and wire for a given application. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

360 Panel - Rocker Switch DPDT - ON-OFF-ON For use in 360 panels in the following modules: Gauge, DC Push Button + Switch, and DC Battery Management The 360 Panel System uses an open frame to mount a broad selection of modules, allowing multiple functions to be combined in a single panel. This innovative design offers a wide choice of panel features, can accommodate future changes and permits rapid assembly. With options ranging from battery management to source selection, the 360 Panel System provides unmatched design flexibility. Specifications: Action*: ON-OFF-ON Pole/Throw**: DPDT Maximum Amperage***:8A @ 125V AC / 5A @ 12V DC / 5A @ 24V DC / 4A @ 250V AC Terminal Type: Wire Leads Terminal Size: 6.00" (152.4mm) Weight:0.08lb (0.04kg) *Action () = Momentary ON **Pole/Throw: SPST - Single Pole/Single Throw SPDT - Single Pole/Double Throw DPST - Double Pole/Single Throw DPDT - Double Pole/Double Throw ***Maximum Amperage - Maximum amperage ratings are dependent on use of appropriately sized fuses and wire for a given application. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Metal Bat Handle Toggle Switches Single or Double pole, and maintaining or momentary configurations are available Rated at 10A 250VAC, 15A 125VAC, and 15A 30VDC (ABYC E-11.14.1.1) AC units are UL recognized for use in the USA and CSA certified for use in Canada Optional silicone rubber boots provide a watertight panel seal 1/4" male tab terminals are standard Hole plugs 1/2" diameter black (P/N 016-004) and white (P/N 016-020)

Metal Bat Handle Toggle Switches Single or Double pole, and maintaining or momentary configurations are available Rated at 10A 250VAC, 15A 125VAC, and 15A 30VDC (ABYC E-11.14.1.1) AC units are UL Recognized for use in the USA and CSA Certified for use in Canada. Optional silicone rubber boots provide a watertight panel seal 1/4" male tab terminals are standard Hole plugs 1/2" diameter black (P/N 016-004) and white (P/N 016-020)

Metal Bat Handle Toggle Switches Single or double pole, and maintaining or momentary configurations are available Rated at 10A 250VAC, 15A 125VAC, and 15A 30VDC (ABYC E-11.14.1.1.) AC units are UL Recognized for use in the USA and CSA certified for use in Canada Optional silicone rubber boots provide a watertight panel seal 1/4" male tab terminals are standard Hole plugs 1/2" diamter Black (P/N 016-004) and White (P/N 016-020)

Sealed Rocker Switch Non-Illuminated DPDT (On)-Off-(On) 6 Blade Features: 25A at 12V DC, 15A at 24V DC General specifications are the same as for the preceding ‘Sealed Switches with Pilot Lights’ Sealed to IP66 for water resistance (high pressure wash.) Double Pole, Double Throw Six brass blade terminals