|
DT Deutsch Socket for 14-18 AWG Plug - Size 16 Contact (25 Pack)
Deutsch machined contacts are for use with almost the entire line of Deutsch connectors and are ideal for marine conditions. They are known for their reliability and durability, which are just a few of the reasons that professionals turn to these contacts for repeatable and reliable results. Another benefit of these contacts is that they are simple to use and require little time for installation.
Features:
Easy to install
Field serviceable
Applications:
Cable-to-cable applications
Enclosed connectors offer field-proven reliability and rugged quality
Compliances:
Ingress Protection (IP) Level: IP68 and IP6K9K
RoHS
UL Recognized
Characteristics:
Hand-insertable contacts
Specifications:
Package Size: 25 sockets
Contact Size: 16
Wire Size: 14
Operating Temperature: -55°C to 125°C
Current Rating: 7.5-25
|
14.62 |
|
|
DT Deutsch Pin for 14-18 AWG Receptacle - Size 16 Contact (25 Pack)
Deutsch machined contacts are for use with almost the entire line of Deutsch connectors and are ideal for marine conditions. They are known for their reliability and durability, which are just a few of the reasons that professionals turn to these contacts for repeatable and reliable results. Another benefit of these contacts is that they are simple to use and require little time for installation.
Features:
Easy to install
Field serviceable
Applications:
Cable-to-cable applications
Enclosed connectors offer field-proven reliability and rugged quality
Compliances:
Ingress Protection (IP) Level: IP68 and IP6K9K
RoHS
UL Recognized
Characteristics:
Hand-insertable contacts
Specifications:
Package Size: 25 pins
Contact Size: 16
Wire Size: 14
Operating Temperature: -55°C to 125°C
Current Rating: 7.5-25
|
10.49 |
|
|
22-18 AWG Heat Shrink Butt Connector - 25 Pack
Butt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.
Features:
Made from tinned copper and various insulations
Up to 600 Volts
Not applicable to all styles
Operating Temp: -55°C to 125°C
UL, CSA, RoHS Compliant
Benefits & Protections
Impact Resistant
Multiple Uses
Long Term Protection
Easy to Install
Specifications:
Wire Range: #22-18 AWG
Insulation Color: Red
Max Wire Insulation Outer Diameter (inch): 0.19"
Package Size: Twenty-five
|
17.65 |
|
|
22-18 AWG Heat Shrink Female Disconnect - 25 Pack
Disconnects are a type of terminal intended to be disconnected and reconnected multiple times. This makes them ideal for use where field serviceability is an issue. Disconnects are a great way to protect electrical connections. Whether dealing with mechanical abuse, wire pull-out, or abrasion, they are a solid choice for longevity. Disconnects are sometimes known as quick connects or slip-on connectors.
Features:
Fully insulated
Female disconnect
Protects terminations from water, condensation, salt spray, and corrosion
Added vibration protection in rugged environments
Disconnect & reconnectable
Creates solid connections
Meets multiple compliances
Benefits:
Environmentally sealed
Built for durability
Tinned Copper
Long Lasting
Easy to install
Characteristics:
Insulation Color: Red
Wire AWG: 22-18 AWG
Package Size: Twenty-five included
Disconnect/Bullet Size (inch): 0.250
Shrink Ratio: Approximately 3:1 at 135 °C
Operating Temperature: -55 °C - 125 °C
Volume Resistivity: 1015 Ohm-cm3
Dielectric Strength: 900-V/mil
Voltage Rating: 600-V
|
14.63 |
|
|
22-18 AWG Heat Shrink Male Disconnect - 25 Pack
Disconnects are a type of terminal intended to be disconnected and reconnected multiple times. This makes them ideal for use where field serviceability is an issue. Disconnects are a great way to protect electrical connections. Whether dealing with mechanical abuse, wire pull-out, or abrasion, they are a solid choice for longevity. Disconnects are sometimes known as quick connects or slip-on connectors.
Features:
Partially insulated
Male disconnect
Protects terminations from water, condensation, salt spray, and corrosion
Added vibration protection in rugged environments
Disconnect & reconnectable
Creates solid connections
Meets multiple compliances
Benefits:
Environmentally sealed
Built for durability
Tinned Copper
Long Lasting
Easy to install
Characteristics:
Insulation Color: Red
Wire AWG: 22-18 AWG
Package Size: Twenty-five included
Disconnect Size (inch): 0.250"
Shrink Ratio: Approximately 3:1 at 135 °C
Operating Temperature: -55 °C - 125 °C
Volume Resistivity: 1015 Ohm-cm3
Dielectric Strength: 900-V/mil
Voltage Rating: 600-V
|
28.12 |
|
|
Yellow 18 AWG Wire Ferrule - 6mm Length - 25 Pack
Wire fraying can quickly become a problem when dealing with IEC (European)-style terminal blocks. As the wire frays, the connection becomes weaker, and the problem will need to be addressed. But all that can be prevented. How? By utilizing wire ferrules. Wire ferrules are a type of terminal that prevents wire fraying. It covers the stranded wire and creates a solid, connected piece. In a sense, wire ferrules make stranded wire behave like solid wire. This is important, especially when working with IEC terminal blocks.
How are wire ferrules properly used? The first step is to strip the wire to the correct length. Now slide the ferrule over the exposed wire. Make sure that the nylon casing butts up to the wire insulation. Once set, crimp using the proper tool. Using the proper tool is important, as, without the proper pressure, the wire may not create a solid connection. Proper crimping pressure and technique are key to ensuring continued performance. Once properly crimped, users can add heat shrink for added protection if they choose.
Features:
Prevent strand separation while minimizing strand breakage
Insulated ferrules provide additional electrical insulation
Increase connection reliability when terminating stranded wire in terminal blocks
Specifications:
Package Size: 25
Wire Size (AWG): 18
Insulation Color: Yellow
Ferrule Length: 6mm (0.24 in.)
Stripping Length: 8mm (0.31 in.)
|
4.32 |
|
|
22-18 AWG - #6 Nylon Ring Terminal - 25-Pack
Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.
Features:
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 486C
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
6.19 |
|
|
22-18 - AWG #8 Nylon Ring Terminal - 25-Pack
Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.
Features:
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 486C
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
6.54 |
|
|
22-18 AWG - #10 Nylon Ring Terminal - 25-Pack
Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.
Features:
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 486C
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
6.54 |
|
|
DT Deutsch Plug Repair Kit - 14-18 AWG (2 Position)
Pacer's DT repair kits use the larger size 16 contacts (Deutsch Pin P/N 0460-215-16141, Socket P/N 0462-209-16141) for applications using 14 AWG wires. However, DT series connectors are designed for 20-14 wire gauge applications. The DT series offers electrical designers the ability to use multiple sizes of 16 contacts (20-14 AWG) each with a 13-amp continuous capacity, within a single shell. Pacer also sells these other components for use in a wider range of applications.
Features:
Packs include all parts needed to assemble a connector
One to two extra terminals
Cavity plugs to seal open circuits
Applications:
Wire-to-wire applications
Enclosed connectors offer field-proven reliability and rugged quality
Compliances:
Ingress Protection (IP) Level: IP68 and IP6K9K
EU RoHS/ELV
Standard UL-94 Recognized
Characteristics:
Wedge locks ensure contact alignment and retention
Redundant Silicone Seals
Hand-insertable and removable contacts
Technical Specifications:
Number of Cavities: 2
Housing: Rectangular receptacle, plastic reinforced with glass fiber
Contact Size: 16 (13 amp)
Wire Size: 14 AWG
Holds Pin/Socket: Sockets
Operating Temperature: -55°C to 125°C
Contents:
(1) 2 pos. plug
(1) 2 pos. wedge lock
(3) sockets
|
3.68 |
|
|
DT Deutsch Plug Repair Kit - 14-18 AWG (3 Position)
Pacer's DT repair kits use the larger size 16 contacts (Deutsch Pin P/N 0460-215-16141, Socket P/N 0462-209-16141) for applications using 14 AWG wires. However, DT series connectors are designed for 20-14 wire gauge applications. The DT series offers electrical designers the ability to use multiple sizes of 16 contacts (20-14 AWG) each with a 13-amp continuous capacity, within a single shell. Pacer also sells these other components for use in a wider range of applications.
Features:
Packs include all parts needed to assemble a connector
One to two extra terminals
Cavity plugs to seal open circuits
Applications:
Wire-to-wire applications
Enclosed connectors offer field-proven reliability and rugged quality
Compliances:
Ingress Protection (IP) Level: IP68 and IP6K9K
EU RoHS/ELV
Standard UL-94 Recognized
Characteristics:
Wedge locks ensure contact alignment and retention
Redundant Silicone Seals
Hand-insertable and removable contacts
Technical Specifications:
Number of Cavities: 3
Housing: Rectangular receptacle, plastic reinforced with glass fiber
Contact Size: 16 (13 amp)
Wire Size: 14 AWG
Holds Pin/Socket: Sockets
Operating Temperature: -55°C to 125°C
Contents:
(1) 3 pos. plug
(1) 3 pos. wedge lock
(4) sockets
(1) cavity plug
|
5.82 |
|
|
DT Deutsch Plug Repair Kit - 14-18 AWG (4 Position)
Pacer's DT repair kits use the larger size 16 contacts (Deutsch Pin P/N 0460-215-16141, Socket P/N 0462-209-16141) for applications using 14 AWG wires. However, DT series connectors are designed for 20-14 wire gauge applications. The DT series offers electrical designers the ability to use multiple sizes of 16 contacts (20-14 AWG) each with a 13-amp continuous capacity, within a single shell. Pacer also sells these other components for use in a wider range of applications.
Features:
Packs include all parts needed to assemble a connector
One to two extra terminals
Cavity plugs to seal open circuits
Applications:
Wire-to-wire applications
Enclosed connectors offer field-proven reliability and rugged quality
Compliances:
Ingress Protection (IP) Level: IP68 and IP6K9K
EU RoHS/ELV
Standard UL-94 Recognized
Characteristics:
Wedge locks ensure contact alignment and retention
Redundant Silicone Seals
Hand-insertable and removable contacts
Technical Specifications:
Number of Cavities: 4
Housing: Rectangular receptacle, plastic reinforced with glass fiber
Contact Size: 16 (13 amp)
Wire Size: 14 AWG
Holds Pin/Socket: Sockets
Operating Temperature: -55°C to 125°C
Contents:
(1) 4 pos. plug
(1) 4 pos. wedge lock
(5) sockets
(2) cavity plugs
|
6.00 |
|
|
DT Deutsch Plug Repair Kit - 14-18 AWG (6 Position)
Pacer's DT repair kits use the larger size 16 contacts (Deutsch Pin P/N 0460-215-16141, Socket P/N 0462-209-16141) for applications using 14 AWG wires. However, DT series connectors are designed for 20-14 wire gauge applications. The DT series offers electrical designers the ability to use multiple sizes of 16 contacts (20-14 AWG) each with a 13-amp continuous capacity, within a single shell. Pacer also sells these other components for use in a wider range of applications.
Features:
Packs include all parts needed to assemble a connector
One to two extra terminals
Cavity plugs to seal open circuits
Applications:
Wire-to-wire applications
Enclosed connectors offer field-proven reliability and rugged quality
Compliances:
Ingress Protection (IP) Level: IP68 and IP6K9K
EU RoHS/ELV
Standard UL-94 Recognized
Characteristics:
Wedge locks ensure contact alignment and retention
Redundant Silicone Seals
Hand-insertable and removable contacts
Technical Specifications:
Number of Cavities: 6
Housing: Rectangular receptacle, plastic reinforced with glass fiber
Contact Size: 16 (13 amp)
Wire Size: 14 AWG
Holds Pin/Socket: Sockets
Operating Temperature: -55°C to 125°C
Contents:
(1) 6 pos. plug
(1) 6 pos. wedge lock
(8) sockets
(3) cavity plugs
|
9.30 |
|
|
DT Deutsch Plug Repair Kit - 14-18 AWG (8 Position)
Pacer's DT repair kits use the larger size 16 contacts (Deutsch Pin P/N 0460-215-16141, Socket P/N 0462-209-16141) for applications using 14 AWG wires. However, DT series connectors are designed for 20-14 wire gauge applications. The DT series offers electrical designers the ability to use multiple sizes of 16 contacts (20-14 AWG) each with a 13-amp continuous capacity, within a single shell. Pacer also sells these other components for use in a wider range of applications.
Features:
Packs include all parts needed to assemble a connector
One to two extra terminals
Cavity plugs to seal open circuits
Applications:
Wire-to-wire applications
Enclosed connectors offer field-proven reliability and rugged quality
Compliances:
Ingress Protection (IP) Level: IP68 and IP6K9K
EU RoHS/ELV
Standard UL-94 Recognized
Characteristics:
Wedge locks ensure contact alignment and retention
Redundant Silicone Seals
Hand-insertable and removable contacts
Technical Specifications:
Number of Cavities: 8
Housing: Rectangular receptacle, plastic reinforced with glass fiber
Contact Size: 16 (13 amp)
Wire Size: 14 AWG
Holds Pin/Socket: Sockets
Operating Temperature: -55°C to 125°C
Contents:
(1) 8 pos. plug
(1) 8 pos. wedge lock
(10) sockets
(4) cavity plugs
|
9.90 |
|
|
DT Deutsch Plug Repair Kit - 14-18 AWG (12 Position)
Pacer's DT repair kits use the larger size 16 contacts (Deutsch Pin P/N 0460-215-16141, Socket P/N 0462-209-16141) for applications using 14 AWG wires. However, DT series connectors are designed for 20-14 wire gauge applications. The DT series offers electrical designers the ability to use multiple sizes of 16 contacts (20-14 AWG) each with a 13-amp continuous capacity, within a single shell. Pacer also sells these other components for use in a wider range of applications.
Features:
Packs include all parts needed to assemble a connector
One to two extra terminals
Cavity plugs to seal open circuits
Applications:
Wire-to-wire applications
Enclosed connectors offer field-proven reliability and rugged quality
Compliances:
Ingress Protection (IP) Level: IP68 and IP6K9K
EU RoHS/ELV
Standard UL-94 Recognized
Characteristics:
Wedge locks ensure contact alignment and retention
Redundant Silicone Seals
Hand-insertable and removable contacts
Technical Specifications:
Number of Cavities: 12
Housing: Rectangular receptacle, plastic reinforced with glass fiber
Contact Size: 16 (13 amp)
Wire Size: 14 AWG
Holds Pin/Socket: Sockets
Operating Temperature: -55°C to 125°C
Contents:
(1) 12 pos. plug
(1) 12 pos. wedge lock
(14) sockets
(6) cavity plugs
|
11.09 |
|