Vertical Mount Stern Light - Stainless Steel This Perko light is certified for replacement use only on sail or power-driven vessels under 12 meters (39.4 feet) in length. Features: Polished stainless steel top Black polymer base Red and green lenses Gold-plated contacts For replacement use only Specifications: Finish: Stainless steel Visibility: 1 nautical mile Voltage: 12 Volt (bulb included) Wattage: 10 watts Amperage: 0.80 amps Length: 4-1/4 in. Width: 2-3/8 in. Height: 1-1/2 in. Screw Size: #4

Horizontal Mount Stern Light - Stainless Steel This horizontal-mount stern light is for use on sail or power-driven vessels under 20 meters (65.6 ft.) in length. This light meets the USCG requirements for 12-volt applications but can also be used as 24-volt A.B.Y.C. A-16 certified lights on boats built prior to 11/1/03. Features: Polished stainless steel top Black polymer base 2-Mile (USCG 2nm) certified Specifications: Bulb: 12 Volt (Included) Wattage: 10 watts Amperage: .80 amps O.D. Base: 2-3/8 in. Height: 1-5/8 in. Screw Size: #4

Vertical Mount Stern Light 12VDC with STS Bezel Certified For Use on Sail or Power Driven Vessels Under 20 Meters (65.6 ft.) in Length. Features: Polished Stainless Steel Black Polymer Base Flush Mount 2-Mile (USCG 2nm) Certified Specifications: Voltage: 12 Volt (Bulb Included) Wattage: 10 watts Amperage: .74 amps O.D.: 3" Depth: 1" Height: 1-15/16" Screw Size: #8

Copper Plated Brass or Stainless Steel Top with Black Plastic Base Flush Mount

RGBW Surface Mount Courtesy Light - Stainless Steel The Shadow-Caster marine LED Courtesy Light is an innovative solution for lighting accent areas, hatches, steps, coves, shelves, and compartments of your boat or yacht. The high-efficiency marine LED Courtesy Light is available in 5 color output options: single-color white; single-color blue; single-color red; 2 colors (white and blue) as well as a full color (RGB) version. Single-color versions can be controlled with a standard switch. Multi-color and full-color versions can be controlled with Shadow-Caster LED controller options. Features: Low glare design shines light downward from the side emitting housing Single and multi-color versions are available Low current draw LED lighting IP67 design makes light suitable for baitwells Available in polished stainless steel or ABS which includes white and black covers Low-profile design blends with the interior 3-Year Warranty Specifications: Up to 26,000 mCD light output Edge-emitting LED lights with a 110° viewing angle for single lights and 130° for color-changing lights 60mA (single color lights) 120mA (max) (RGB) 10-30 volts input 40,000 hour LED lifetime UV stabilized polycarbonate with submersible enclosure 1.5′ (457mm) of 20 AWG wire IP67 waterproof design

LightArmor Deck Mount Navigation Light - Stainless Steel - Starboard (green) - 2NM INTRODUCING LIGHTARMOR NAVIGATION LIGHTS, a new line of streamlined deck mount lights that meet today's global regulatory requirements, including EN/ISO 19009:2015.* LED Light Engine Cool to the touch Long lasting - 50,000+ hours Color indicated cores for ease of installation Be Safe, Be Seen Sharper cut-off angles and vibrant starboard and port colors for better visibility 2 NM U.S.C.G. Certified Corrosion Resistant Water-Resistant (IP Rating 67) Features tell-tale indicators for ease of use Smaller footprint with refined styling WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LightArmor Deck Mount Navigation Light - Stainless Steel - Bi-Color - 2NM INTRODUCING LIGHTARMOR NAVIGATION LIGHTS, a new line of streamlined deck mount lights that meet today's global regulatory requirements, including EN/ISO 19009:2015.* LED Light Engine Cool to the touch Long lasting - 50,000+ hours Color indicated cores for ease of installation Be Safe, Be Seen Sharper cut-off angles and vibrant starboard and port colors for better visibility 2 NM U.S.C.G. Certified Corrosion Resistant Water-Resistant (IP Rating 67) Features tell-tale indicators for ease of use Smaller footprint with refined styling WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LightArmor Deck Mount Navigation Light - Stainless Steel - Port (red) - 2NM INTRODUCING LIGHTARMOR NAVIGATION LIGHTS, a new line of streamlined deck mount lights that meet today's global regulatory requirements, including EN/ISO 19009:2015.* LED Light Engine Cool to the touch Long lasting - 50,000+ hours Color indicated cores for ease of installation Be Safe, Be Seen Sharper cut-off angles and vibrant starboard and port colors for better visibility 2 NM U.S.C.G. Certified Corrosion Resistant Water-Resistant (IP Rating 67) Features tell-tale indicators for ease of use Smaller footprint with refined styling WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

12V LED Side Light - Stainless Steel Features: Stainless Steel and Black Polymer Base These lights are designed to be mounted only on a vertical surface Specifications: Voltage: 12 Volt LED Screw Size: #6 2 Mile Visibility

Vertical Mount Side Lights - 12V - Black Certified For Use on Power Driven Vessels Under 20M (65.6') in Length  Features: All Black Polymer Red and Green Lenses Gold Plated Contacts Specifications: Bulb: 12 Volt (Included) Projection: 7/8" Length: 3-1/2" Width: 2-1/4" Screw Size: #8

LED Docking Lights - Stainless Steel - White LED - Pair Compared to its 55-watt halogen competition, the Attwood Surface Mount LED Docking Light draws a fraction of the power while producing a brighter output. The Attwood product also transmits light in a much broader pattern as opposed to a narrow beam generated by today’s competitors. Simply put, Attwood’s docking light performs like a true “docking light” instead of a narrow-beam headlight.  Power draw and performance are important, but what about assembly? At 1.2" thick, the lights are designed to be mounted directly to the surface of the hull. With only a small hole for wiring and three (3) screws for attachment, Attwood’s surface mount design makes installation quick and ncomplicated.  This new LED Docking Light allows for fewer hull cuts and minimal intrusion while producing results that are reliable and attractive. Backed by a 10-year warranty, Attwood’s LED Docking Light is designed and tested for extreme conditions. Attwood used only the highest grade Stainless Steel and aluminum components to ensure the product is resistant to corrosion. The rubber gasket provided creates a barrier that protects your hull from water entry, ensures the light is watertight and keeps all electrical components fully sealed. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RGBW 10" Long Courtesy Light - Stainless Steel Caps The Shadow-Caster marine LED Courtesy Light is an innovative solution for lighting accent areas, hatches, steps, coves, shelves, and compartments of your boat or yacht. The high-efficiency marine LED Courtesy Light is available in 5 color output options: single-color white; single-color blue; single-color red; 2 colors (white and blue) as well as a full color (RGB) version. Single-color versions can be controlled with a standard switch. Multi-color and full-color versions can be controlled with Shadow-Caster LED controller options. Features: Low glare design shines light downward from the side emitting housing Single and multi-color versions are available Low current draw LED lighting IP67 design makes light suitable for baitwells Available in polished stainless steel or ABS which includes white and black covers Low-profile design blends with the interior 3-Year Warranty Specifications: Up to 26,000 mCD light output Edge-emitting LED lights with a 110° viewing angle for single lights and 130° for color-changing lights 60mA (single color lights) 120mA (max) (RGB) 10-30 volts input 40,000 hour LED lifetime UV stabilized polycarbonate with submersible enclosure 1.5′ (457mm) of 20 AWG wire IP67 waterproof design

12V Buzzer with Red LED Warning Light - Stainless Steel Buzzers are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch backlighting. The product line includes both switches and warning buzzers with LED light rings. Features: IP50 environmental protection buzzers 80-decibel buzzer sound intensity WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

90° P-Trap Fuel Tank Vent - Flush Mount - Black with Stainless Steel Vent Head This Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns. This vent’s effectiveness. eliminates the need for an anti-siphon loop in the vent hose. This is a flush mount vent for use with a 5/8-inch interior diameter hose. It requires a 1-3/8-inch installation hole and can be used with a maximum hull thickness of 1 inch. Features: This black vent with a stainless steel vent head meets ABYC standards Flush Mount - 5/8" I.D. hose (inch) 1-3/8" install. hole size (inch) 1" Max. hull thickness *Compatible with Ethanol blended fuels

Flush Mount Cup Holder w/Blue LED Light - Stainless Steel LED Illuminated Flush Cup holder with Blue light Cut-Out: 3-3/4" O.D.: 4-1/4" Uses 12V battery power Comes with 6" wire leads Includes Thick Mounting Gasket, pad & 3/8" drain tube Fits cams, bottles & can coolers