|
Wrath II 8000 Spinning Reel WRTHII8000C
The PENN® Wrath® II was built around an affordable platform while emphasizing the legendary PENN® durability. Featuring a lightweight and corrosion-resistant body with a machined and anodized aluminum spool, these reels will provide the power needed when fishing anywhere from the river to the coast. The 2+1 shielded stainless steel bearing and instant anti-reverse provide a smooth and reliable gear system. Cosmetics have sizes ranging from 2500 to 8000, so anglers will be able to bring the Wrath® to anything with fins.
Features:
Lightweight and corrosion-resistant graphite body
2 stainless steel ball bearings
Instant anti-reverse bearing
Machined and anodized aluminum spool
Line capacity rings
Specifications:
Reel Handle Position: Right/Left
Gear Ratio: 5:3:1
Bearing Count: 3
Color: Black/gold
Reel Size: 8000
Mono Capacity: 340/20 310/25 230/30
Braid Capacity: 475/50 390/65 345/80
Max Drag: 25 lb. | 11.3 kg
Drag Type: Front Drag
|
54.12 |
|
|
Wrath II 2500 Spinning Reel WRTHII2500C
The PENN® Wrath® II was built around an affordable platform while emphasizing the legendary PENN® durability. Featuring a lightweight and corrosion-resistant body with a machined and anodized aluminum spool, these reels will provide the power needed when fishing anywhere from the river to the coast. The 2+1 shielded stainless steel bearing and instant anti-reverse provide a smooth and reliable gear system. Cosmetics have sizes ranging from 2500 to 8000, so anglers will be able to bring the Wrath® to anything with fins.
Features:
Lightweight and corrosion-resistant graphite body
2 stainless steel ball bearings
Instant anti-reverse bearing
Machined and anodized aluminum spool
Line capacity rings
Specifications:
Reel Handle Position: Right/Left
Gear Ratio: 6:2:1
Bearing Count: 3
Color: Black/gold
Reel Size: 2500
Mono Capacity: 255/6 175/8 140/10
Braid Capacity: 240/10 220/15 160/20
Max Drag: 10 lb. | 4.5 kg
Drag Type: Front Drag
|
39.06 |
|
|
Wrath II 3000 Spinning Reel WRTHII3000C
The PENN® Wrath® II was built around an affordable platform while emphasizing the legendary PENN® durability. Featuring a lightweight and corrosion-resistant body with a machined and anodized aluminum spool, these reels will provide the power needed when fishing anywhere from the river to the coast. The 2+1 shielded stainless steel bearing and instant anti-reverse provide a smooth and reliable gear system. Cosmetics have sizes ranging from 2500 to 8000, so anglers will be able to bring the Wrath® to anything with fins.
Features:
Lightweight and corrosion-resistant graphite body
2 stainless steel ball bearings
Instant anti-reverse bearing
Machined and anodized aluminum spool
Line capacity rings
Specifications:
Reel Handle Position: Right/Left
Gear Ratio: 6:2:1
Bearing Count: 3
Color: Black/gold
Reel Size: 3000
Mono Capacity: 200/8 165/10 120/12
Braid Capacity: 250/15 180/20 130/30
Max Drag: 12 lb. | 5.4 kg
Drag Type: Front Drag
|
39.06 |
|
|
Wrath II 4000 Spinning Reel WRTHII4000C
The PENN® Wrath® II was built around an affordable platform while emphasizing the legendary PENN® durability. Featuring a lightweight and corrosion-resistant body with a machined and anodized aluminum spool, these reels will provide the power needed when fishing anywhere from the river to the coast. The 2+1 shielded stainless steel bearing and instant anti-reverse provide a smooth and reliable gear system. Cosmetics have sizes ranging from 2500 to 8000, so anglers will be able to bring the Wrath® to anything with fins.
Features:
Lightweight and corrosion-resistant graphite body
2 stainless steel ball bearings
Instant anti-reverse bearing
Machined and anodized aluminum spool
Line capacity rings
Specifications:
Reel Handle Position: Right/Left
Gear Ratio: 6:2:1
Bearing Count: 3
Color: Black/gold
Reel Size: 4000
Mono Capacity: 270/8 220/10 165/12
Braid Capacity: 360/15 260/20 185/30
Max Drag: 15 lb. | 6.8 kg
Drag Type: Front Drag
|
39.06 |
|
|
Wrath II 5000 Spinning Reel WRTHII5000C
The PENN® Wrath® II was built around an affordable platform while emphasizing the legendary PENN® durability. Featuring a lightweight and corrosion-resistant body with a machined and anodized aluminum spool, these reels will provide the power needed when fishing anywhere from the river to the coast. The 2+1 shielded stainless steel bearing and instant anti-reverse provide a smooth and reliable gear system. Cosmetics have sizes ranging from 2500 to 8000, so anglers will be able to bring the Wrath® to anything with fins.
Features:
Lightweight and corrosion-resistant graphite body
2 stainless steel ball bearings
Instant anti-reverse bearing
Machined and anodized aluminum spool
Line capacity rings
Specifications:
Reel Handle Position: Right/Left
Gear Ratio: 5:6:1
Bearing Count: 3
Color: Black/gold
Reel Size: 5000
Mono Capacity: 225/12 200/15 135/20
Braid Capacity: 420/20 300/30 240/40
Max Drag: 20 lb. | 9.1 kg
Drag Type: Front Drag
|
46.75 |
|
|
Wrath II 6000 Spinning Reel WRTHII6000C
The PENN® Wrath® II was built around an affordable platform while emphasizing the legendary PENN® durability. Featuring a lightweight and corrosion-resistant body with a machined and anodized aluminum spool, these reels will provide the power needed when fishing anywhere from the river to the coast. The 2+1 shielded stainless steel bearing and instant anti-reverse provide a smooth and reliable gear system. Cosmetics have sizes ranging from 2500 to 8000, so anglers will be able to bring the Wrath® to anything with fins.
Features:
Lightweight and corrosion-resistant graphite body
2 stainless steel ball bearings
Instant anti-reverse bearing
Machined and anodized aluminum spool
Line capacity rings
Specifications:
Reel Handle Position: Right/Left
Gear Ratio: 5:6:1
Bearing Count: 3
Color: Black/gold
Reel Size: 6000
Mono Capacity: 335/15 230/20 210/25
Braid Capacity: 490/30 390/40 335/50
Max Drag: 20 lb. | 9.1 kg
Drag Type: Front Drag
|
54.12 |
|
|
Pursuit® IV 8000 Spinning Reel
The PENN® Pursuit® IV features durable construction and the smooth gear system anglers expect from PENN®. This reel features an ultra-lightweight, corrosion-resistant graphite body and powerful HT-100™ drag system making the Pursuit® IV a great value for the money for saltwater anglers. Available in six sizes from 2500 to 8000, the Pursuit® IV has a reel for most fisheries. The Instant Anti-Reverse bearing eliminates even the slightest rotor back play for instant hook-ups every time, while the 4 sealed stainless steel ball bearings provide smooth retrieves.
Features:
HT-100™ carbon fiber drag washers
Lightweight and corrosion-resistant graphite body
4 Sealed Stainless Steel Ball Bearings
Instant Anti-Reverse Bearing
Machined and anodized aluminum spool
Superline Spool
Line Capacity Rings
|
107.99 |
|
|
22 Free Swimmer Bite'N' Run 8000 Spinning Reel - FRSW8000
A return to the foray of Bite’N’Run reels with Daiwa’s new FREE SWIMMER BR. Bite’N’Run is a key technology for keen live or dead bait anglers allowing fish to take baits under minimal line tension to ensure a solid hookset is achieved.
Designed in collaboration between Daiwa USA, Daiwa Australia, Daiwa New Zealand, and alongside Japanese engineers, FREE SWIMMER BR is a product five years in the making and a testament to Daiwa’s commitment to providing the best products to suit local conditions.
Anglers will set the Bite’N’Run tension by adjusting the dial on the bottom of the reel, a wide range can be set to suit unweighted baits for finicky feeders such as whiting, up to quite strong settings suitable to live baiting large baits for hard-fighting predators like Kingfish & Mackeral.
FREE SWIMMER BR is built off a strong & sturdy carbon composite frame and Air Rotor. The internals has been carefully sealed through careful design and implementation of rubber seals to make FREESWIMMER a true Saltwater Bite’N’Run reel. Careful attention to detail was paid throughout the design and prototype stages to make FREE SWIMMER BR capable of handling even the largest of New Zealand Kingfish & Snapper.
FREE SWIMMER BR is equipped with a host of regular Daiwa technologies including Air Rotor, ATD Drag, Tough Digigear & more to round out the best-performing Bite’N’Run reel Daiwa has ever produced.
BITE N RUN
Bite’N’Run is a key technology for keen live or dead bait anglers allowing fish to take baits under minimal line tension to ensure a solid hook set is achieved. The rear drag can be easily adjusted to provide optimum tension for each scenario.
AIR ROTOR
Lighter, stronger, and more balanced than any rotor system that’s come before, ‘Air Rotor’ delivers a great leap forward in rotor design and function and delivers the ultimate line roller support. Made from Zaion and featuring a redesigned arch that disperses pressure to the lower section of the rotor to reduce stressing and flexing, the design is further enhanced with a hollowed-out construction reducing weight while increasing reel sensitivity and rotational balance.
ATD DRAG
Daiwa’s Automatic Tournament Drag uses an improved drag grease that exhibits a low viscosity at rest, yet becomes more viscous immediately after drag starts up. This reduces initial drag start-up inertia and combined with the structural changes of the ATD Drag System results in a smoother drag from the initial hook up.
TOUGH DIGIGEAR
Further evolution of its predecessor Digigear, Tough Digigear is our brand new digitally designed, machine-cut gearing system that ensures ultimate gear precision, rotational smoothness, and strength.
|
239.99 |
|
|
Pursuit® IV 5000 Spinning Reel
The PENN® Pursuit® IV features durable construction and the smooth gear system anglers expect from PENN®. This reel features an ultra-lightweight, corrosion-resistant graphite body and powerful HT-100™ drag system making the Pursuit® IV a great value for the money for saltwater anglers. Available in six sizes from 2500 to 8000, the Pursuit® IV has a reel for most fisheries. The Instant Anti-Reverse bearing eliminates even the slightest rotor back play for instant hook-ups every time, while the 4 sealed stainless steel ball bearings provide smooth retrieves.
Features:
HT-100™ carbon fiber drag washers
Lightweight and corrosion-resistant graphite body
4 Sealed Stainless Steel Ball Bearings
Instant Anti-Reverse Bearing
Machined and anodized aluminum spool
Superline Spool
Line Capacity Rings
|
95.99 |
|
|
Pursuit® IV 2500 Spinning Reel
The PENN® Pursuit® IV features durable construction and the smooth gear system anglers expect from PENN®. This reel features an ultra-lightweight, corrosion-resistant graphite body and powerful HT-100™ drag system making the Pursuit® IV a great value for the money for saltwater anglers. Available in six sizes from 2500 to 8000, the Pursuit® IV has a reel for most fisheries. The Instant Anti-Reverse bearing eliminates even the slightest rotor back play for instant hook-ups every time, while the 4 sealed stainless steel ball bearings provide smooth retrieves.
Features:
HT-100™ carbon fiber drag washers
Lightweight and corrosion-resistant graphite body
4 Sealed Stainless Steel Ball Bearings
Instant Anti-Reverse Bearing
Machined and anodized aluminum spool
Superline Spool
Line Capacity Rings
|
48.49 |
|
|
Pursuit® IV 3000 Spinning Reel
The PENN® Pursuit® IV features durable construction and the smooth gear system anglers expect from PENN®. This reel features an ultra-lightweight, corrosion-resistant graphite body and powerful HT-100™ drag system making the Pursuit® IV a great value for the money for saltwater anglers. Available in six sizes from 2500 to 8000, the Pursuit® IV has a reel for most fisheries. The Instant Anti-Reverse bearing eliminates even the slightest rotor back play for instant hook-ups every time, while the 4 sealed stainless steel ball bearings provide smooth retrieves.
Features:
HT-100™ carbon fiber drag washers
Lightweight and corrosion-resistant graphite body
4 Sealed Stainless Steel Ball Bearings
Instant Anti-Reverse Bearing
Machined and anodized aluminum spool
Superline Spool
Line Capacity Rings
|
56.58 |
|
|
Pursuit® IV 4000 Spinning Reel
The PENN® Pursuit® IV features durable construction and the smooth gear system anglers expect from PENN®. This reel features an ultra-lightweight, corrosion-resistant graphite body and powerful HT-100™ drag system making the Pursuit® IV a great value for the money for saltwater anglers. Available in six sizes from 2500 to 8000, the Pursuit® IV has a reel for most fisheries. The Instant Anti-Reverse bearing eliminates even the slightest rotor back play for instant hook-ups every time, while the 4 sealed stainless steel ball bearings provide smooth retrieves.
Features:
HT-100™ carbon fiber drag washers
Lightweight and corrosion-resistant graphite body
4 Sealed Stainless Steel Ball Bearings
Instant Anti-Reverse Bearing
Machined and anodized aluminum spool
Superline Spool
Line Capacity Rings
|
83.99 |
|
|
Pursuit® IV 6000 Spinning Reel
The PENN® Pursuit® IV features durable construction and the smooth gear system anglers expect from PENN®. This reel features an ultra-lightweight, corrosion-resistant graphite body and powerful HT-100™ drag system making the Pursuit® IV a great value for the money for saltwater anglers. Available in six sizes from 2500 to 8000, the Pursuit® IV has a reel for most fisheries. The Instant Anti-Reverse bearing eliminates even the slightest rotor back play for instant hook-ups every time, while the 4 sealed stainless steel ball bearings provide smooth retrieves.
Features:
HT-100™ carbon fiber drag washers
Lightweight and corrosion-resistant graphite body
4 Sealed Stainless Steel Ball Bearings
Instant Anti-Reverse Bearing
Machined and anodized aluminum spool
Superline Spool
Line Capacity Rings
|
95.99 |
|
|
Spinfisher® VI 8500 Spinning Reel
The PENN Spinfisher VI features IPX5 sealing so whether it gets hit with a wave, or you let it ride in the spray all the way home, you don't have to worry about saltwater getting into the gearbox or drag system. Our HT-100 drag washers are housed in a fully sealed spool to give the stopping power needed for big saltwater fish. A Full Metal Body and sideplate keep the CNC Gear System in precise alignment under heavy loads. Available in standard, Live Liner, Long Cast and bail-less models.
Features:
IPX5 Sealed body and spool design
CNC Gear™ technology
HT-100™ carbon fiber drag washers
5+1 sealed stainless steel ball bearing system
Full Metal Body
Superline Spool
Line Capacity Rings
|
191.96 |
|
|
Spinfisher® VI 6500 Spinning Reel
The PENN Spinfisher VI features IPX5 sealing so whether it gets hit with a wave, or you let it ride in the spray all the way home, you don't have to worry about saltwater getting into the gearbox or drag system. Our HT-100 drag washers are housed in a fully sealed spool to give the stopping power needed for big saltwater fish. A Full Metal Body and sideplate keep the CNC Gear System in precise alignment under heavy loads. Available in standard, Live Liner, Long Cast and bail-less models.
Features:
IPX5 Sealed body and spool design
CNC Gear™ technology
HT-100™ carbon fiber drag washers
5+1 sealed stainless steel ball bearing system
Full Metal Body
Superline Spool
Line Capacity Rings
|
176.60 |
|